[Tue Jun 18 16:46:39 2013] Detection parameters:
  Position = (236.7, 343.8) = 0 46 55.27 42 20 47.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 6946.0 +/- 98.5
  Background counts = 117.3
  Rate = 0.2 +/- 0.003

[Tue Jun 18 16:46:41 2013] Off-axis axis estimate = 5.55'
[Tue Jun 18 16:51:00 2013] Using EEF radius (= 9.21 ")to estimate initial spatial extent for simple fitting
[Tue Jun 18 16:51:00 2013] Initial guess for spatial extent in simple fitting = 9.21"
[Tue Jun 18 16:51:00 2013] source mask rpix=2.1, npix_max = 27, mask sum = 17, frac = 0.621
[Tue Jun 18 16:51:00 2013] Giving source the simple spatial ID 21 for pass 0, mean size = 9.21"
[Tue Jun 18 22:35:17 2013] fullrun_pn_xmm0109270401_pi300-10000_cl_pass0_src21.ximg exists
[Tue Jun 18 22:35:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109270401_pi300-10000_cl_pass0_src21.csv
[Tue Jun 18 22:35:17 2013] fullrun_pn_xmm0109270401_pi300-10000_cl_pass0_src21_1.ximg exists
[Tue Jun 18 22:35:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109270401_pi300-10000_cl_pass0_src21.csv
[Tue Jun 18 22:35:17 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109270401_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109270401_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 18 22:35:18 2013] fullrun_pn_xmm0109270401_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Tue Jun 18 22:35:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109270401_pi300-10000_cl_pass0_tfrozen_src21.csv
[Tue Jun 18 22:35:18 2013] fullrun_pn_xmm0109270401_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Tue Jun 18 22:35:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109270401_pi300-10000_cl_pass0_tfrozen_src21.csv
[Tue Jun 18 22:35:18 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109270401_pi300-10000_cl_pass0_tfrozen_src21_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109270401_pi300-10000_cl_pass0_tfrozen_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 19 00:20:18 2013] Spatial fit model total counts = 8152.010000, observed total counts = 6149.000000
[Wed Jun 19 00:20:18 2013] Poor agreement between spatial fit and data for source 21
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jun 19 00:20:18 2013] Vigneting correction estimate = 1.000000
[Wed Jun 19 00:20:18 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 19 00:20:18 2013] Assessing source extent using major
[Wed Jun 19 00:20:18 2013] Source does appear to be extended
[Wed Jun 19 00:20:18 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 19 00:20:43 2013] Using EEF radius (= 9.21 ")to estimate initial spatial extent for simple fitting
[Wed Jun 19 00:20:43 2013] Initial guess for spatial extent in simple fitting = 9.21"
[Wed Jun 19 00:20:43 2013] source mask rpix=2.1, npix_max = 27, mask sum = 17, frac = 0.621
[Wed Jun 19 00:20:43 2013] Giving source the simple spatial ID 20 for pass 1, mean size = 9.21"
[Wed Jun 19 06:32:16 2013] fullrun_pn_xmm0109270401_pi300-10000_cl_pass1_src20.ximg exists
[Wed Jun 19 06:32:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109270401_pi300-10000_cl_pass1_src20.csv
[Wed Jun 19 06:32:16 2013] fullrun_pn_xmm0109270401_pi300-10000_cl_pass1_src20_1.ximg exists
[Wed Jun 19 06:32:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109270401_pi300-10000_cl_pass1_src20.csv
[Wed Jun 19 06:32:16 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109270401_pi300-10000_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109270401_pi300-10000_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 19 06:32:17 2013] fullrun_pn_xmm0109270401_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Wed Jun 19 06:32:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109270401_pi300-10000_cl_pass1_tfrozen_src20.csv
[Wed Jun 19 06:32:17 2013] fullrun_pn_xmm0109270401_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Wed Jun 19 06:32:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109270401_pi300-10000_cl_pass1_tfrozen_src20.csv
[Wed Jun 19 06:32:17 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109270401_pi300-10000_cl_pass1_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109270401_pi300-10000_cl_pass1_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 19 08:25:19 2013] Warning: source 20 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 21 at 12.294893 pixels away
[Wed Jun 19 08:25:19 2013] Vigneting correction estimate = 1.000000
[Wed Jun 19 08:25:19 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 19 08:25:19 2013] Assessing source extent using major
[Wed Jun 19 08:25:19 2013] Source does appear to be extended
[Wed Jun 19 08:25:19 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 19 08:25:44 2013] Counts = 6946.010742, rescaling region sizes by 2.000000
[Wed Jun 19 08:25:44 2013] XMMSAS src. selection expression = ellipse(20546.691025, 29865.486755, 1305.000000, 1305.000000, 0.000000, X, Y)
[Wed Jun 19 08:25:44 2013] Writing source region out to fullrun_pn_xmm0109270401_pi300-10000_pass1_cl_src21_src.reg
[Wed Jun 19 08:25:44 2013] Extracting stamp from image fullrun_pn_xmm0109270401_pi300-10000_cl_sm2.00.img.gz, (162, 269) - (312, 419)
[Wed Jun 19 08:25:44 2013] XMMSAS bgd. selection expression = annulus(20546.691025, 29865.486755, 4350.000000, 8700.000000, X, Y) && !ellipse(28739.176340, 35623.026800, 443.349613, 241.657607, 38.657460, X, Y) && !ellipse(27182.132600, 34507.999800, 487.211214, 487.211214, 0.000000, X, Y) && !ellipse(17575.406586, 33721.908844, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19041.536331, 32198.960144, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17009.118042, 31767.597534, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18111.178223, 31513.282898, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19424.906660, 31202.298200, 442.550413, 290.959208, 354.085460, X, Y) && !ellipse(30047.977539, 31140.070740, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13757.272675, 31208.528015, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16275.018372, 30624.681763, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29163.696136, 30612.590759, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13921.155685, 30471.921997, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15518.679600, 30553.690600, 1411.872041, 776.695222, 12.076200, X, Y) && !ellipse(16542.544000, 29790.606000, 443.395213, 318.047209, 122.426000, X, Y) && !ellipse(16166.297577, 29297.164459, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21340.884628, 28683.842072, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20970.938156, 27923.279724, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18898.279200, 27180.847400, 348.649610, 348.649610, 0.000000, X, Y) && !ellipse(17813.010000, 26692.229800, 399.655211, 272.242408, 90.256901, X, Y) && !ellipse(25085.299280, 26360.215800, 277.082408, 277.082408, 0.000000, X, Y) && !ellipse(24460.784600, 24436.136000, 505.870415, 505.870415, 0.000000, X, Y) && !ellipse(17092.790300, 24304.384000, 519.717615, 287.282408, 63.530232, X, Y) && !ellipse(28555.675842, 23950.264679, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21292.225906, 22942.367767, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jun 19 08:25:44 2013] Writing fullrun_pn_xmm0109270401_pi300-10000_pass1_cl_src21.gif
[Wed Jun 19 08:40:01 2013] Mean detx,y = (5195.51, 3788.18) 
[Wed Jun 19 08:40:10 2013] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 19 08:42:53 2013] Binned source spectrum to 10 counts/bin
[Wed Jun 19 08:42:54 2013] Setting source spectrum file to fullrun_pn_xmm0109270401_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Wed Jun 19 08:42:54 2013] Setting bgd. spectrum file to fullrun_pn_xmm0109270401_pi300-10000_pass1_cl_src21_bgd.pi.gz
[Wed Jun 19 09:36:16 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jun 19 09:36:16 2013] rmf not generated due to insufficient counts
[Wed Jun 19 11:21:48 2013] Updating aperture counts using extracted products
[Wed Jun 19 11:21:48 2013] Total counts from fullrun_pn_xmm0109270401_pi300-10000_pass1_cl_src21_src_b10.pi.gz = 7382.00
[Wed Jun 19 11:21:48 2013] Total counts from fullrun_pn_xmm0109270401_pi300-10000_pass1_cl_src21_bgd.pi.gz = 38653.00
[Wed Jun 19 11:21:48 2013] Got source and background scale factors 4719619.000000, 145631162.000000
[Wed Jun 19 11:21:48 2013] User source parameters:
  Position = (236.7, 343.8) = 0 46 55.27 42 20 47.9
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 6129.3 +/- 86.9
  Background aperture counts = 1252.7
  Rate = 0.1 +/- 0.002

[Wed Jun 19 11:21:48 2013] Updating counts from extracted products
[Wed Jun 19 11:21:48 2013] Set source signif. to 6129.33/35.39 = 173.18
[Wed Jun 19 11:21:55 2013] Calculating source flux in energy range 0.30-8.00
[Wed Jun 19 11:21:55 2013] Using photon index=1.80, rate=0.119, arf fullrun_pn_xmm0109270401_pi300-10000_pass1_cl_src21.arf
[Wed Jun 19 11:21:55 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 19 11:21:55 2013] Updating source flux to 5e-13
[Wed Jun 19 11:22:18 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed Jun 19 11:22:26 2013] xmm0109270401/analysis//spectral/fullrun_pn_xmm0109270401_pi300-10000_pass1_cl_src21_pl.csv not found, spectral fit skipped or did not complete