[Mon Jan 23 01:19:27 2012] Detection parameters:
  Position = (230.0, 277.2) = 0 43 2.71 41 15 22.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 4897.9 +/- 90.2
  Background counts = 384.0
  Rate = 0.1 +/- 0.002

[Mon Jan 23 01:19:28 2012] Off-axis axis estimate = 5.20'
[Mon Jan 23 01:24:51 2012] Using EEF radius (= 9.03 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 01:24:51 2012] Initial guess for spatial extent in simple fitting = 9.03"
[Mon Jan 23 01:24:51 2012] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.131
[Mon Jan 23 01:24:51 2012] Giving source the simple spatial ID 76 for pass 0, mean size = 9.03"
[Mon Jan 23 07:50:32 2012] fullrun_pn_xmm0109270101_pi300-10000_cl_pass0_src76.ximg exists
[Mon Jan 23 07:50:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109270101_pi300-10000_cl_pass0_src76.csv
[Mon Jan 23 07:50:32 2012] fullrun_pn_xmm0109270101_pi300-10000_cl_pass0_src76_1.ximg exists
[Mon Jan 23 07:50:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109270101_pi300-10000_cl_pass0_src76.csv
[Mon Jan 23 07:50:32 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109270101_pi300-10000_cl_pass0_src76_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109270101_pi300-10000_cl_pass0_src76.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 07:50:34 2012] fullrun_pn_xmm0109270101_pi300-10000_cl_pass0_tfrozen_src76.ximg exists
[Mon Jan 23 07:50:34 2012] fullrun_pn_xmm0109270101_pi300-10000_cl_pass0_tfrozen_src76_1.ximg exists
[Mon Jan 23 07:50:34 2012] Fit fullrun_pn_xmm0109270101_pi300-10000_cl_pass0_tfrozen_src76 appears to have run properly
[Mon Jan 23 17:32:42 2012] Source 85 is offset by -0.060603 and -2.889689 pixels which is larger than
2 X fitted extent = 1.045421 x 0.994460, not incorporating fit results
[Mon Jan 23 17:32:42 2012] Spatial fit model total counts = 4905.730000, observed total counts = 4897.000000
[Mon Jan 23 17:32:42 2012] Offset between fit and detection position for source 85 = 0.137688 pixels
[Mon Jan 23 17:32:42 2012] 4917.220000 total counts/ 2619.060000 bgd. counts: snr = 44.906327
Spatial fit parameters:
  Offset between fit and detection position for source 85 = 0.137688 pixels
  Position = (230.0, 277.3) = 0 43 2.70 41 15 22.4
  Extent = 5.6 (5.5-5.8)", rotation angle = 0
  Source counts = 2298.2 +/- 70.1
  Background counts = 2619.1
  Rate = 0.07 +/- 0.002
[Mon Jan 23 17:32:43 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 17:32:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 17:32:43 2012] Assessing source extent using major axis lower bound
[Mon Jan 23 17:32:43 2012] Source does appear to be extended
[Mon Jan 23 17:32:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan 23 17:33:50 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jan 23 17:33:50 2012] Initial guess for spatial extent in simple fitting = 5.63"
[Mon Jan 23 17:33:50 2012] source mask rpix=1.3, npix_max = 12, mask sum = 16, frac = 1.242
[Mon Jan 23 17:33:50 2012] Giving source the simple spatial ID 72 for pass 1, mean size = 5.63"
[Tue Jan 24 01:57:40 2012] fullrun_pn_xmm0109270101_pi300-10000_cl_pass1_src72.ximg exists
[Tue Jan 24 01:57:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109270101_pi300-10000_cl_pass1_src72.csv
[Tue Jan 24 01:57:40 2012] fullrun_pn_xmm0109270101_pi300-10000_cl_pass1_src72_1.ximg exists
[Tue Jan 24 01:57:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109270101_pi300-10000_cl_pass1_src72.csv
[Tue Jan 24 01:57:40 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109270101_pi300-10000_cl_pass1_src72_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109270101_pi300-10000_cl_pass1_src72.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 24 01:57:42 2012] fullrun_pn_xmm0109270101_pi300-10000_cl_pass1_tfrozen_src72.ximg exists
[Tue Jan 24 01:57:42 2012] fullrun_pn_xmm0109270101_pi300-10000_cl_pass1_tfrozen_src72_1.ximg exists
[Tue Jan 24 01:57:42 2012] Fit fullrun_pn_xmm0109270101_pi300-10000_cl_pass1_tfrozen_src72 appears to have run properly
[Tue Jan 24 09:41:54 2012] Spatial fit model total counts = 4904.810000, observed total counts = 4897.000000
[Tue Jan 24 09:41:54 2012] Offset between fit and detection position for source 85 = 0.000629 pixels
[Tue Jan 24 09:41:54 2012] 4916.430000 total counts/ 2619.600000 bgd. counts: snr = 44.875713
Spatial fit parameters:
  Offset between fit and detection position for source 85 = 0.000629 pixels
  Position = (230.0, 277.3) = 0 43 2.70 41 15 22.4
  Extent = 5.6 (5.5-5.8)", rotation angle = 0
  Source counts = 2296.8 +/- 70.1
  Background counts = 2619.6
  Rate = 0.07 +/- 0.002
[Tue Jan 24 09:41:54 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 09:41:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 09:41:54 2012] Assessing source extent using major axis lower bound
[Tue Jan 24 09:41:54 2012] Source does appear to be extended
[Tue Jan 24 09:41:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 24 09:43:00 2012] Counts = 2296.830000, rescaling region sizes by 2.000000
[Tue Jan 24 09:43:00 2012] XMMSAS src. selection expression = ellipse(19963.514760, 24075.468200, 675.081619, 675.081619, 0.000000, X, Y)
[Tue Jan 24 09:43:00 2012] Writing source region out to fullrun_pn_xmm0109270101_pi300-10000_pass1_cl_src85_src.reg
[Tue Jan 24 09:43:00 2012] Extracting stamp from image fullrun_pn_xmm0109270101_pi300-10000_cl_sm2.00.img.gz, (191, 238) - (269, 316)
[Tue Jan 24 09:43:00 2012] XMMSAS bgd. selection expression = annulus(19963.514760, 24075.468200, 2250.272065, 4500.544130, X, Y) && !ellipse(25459.370100, 24867.731200, 1359.120039, 1359.120039, 0.000000, X, Y) && !ellipse(23540.286420, 25309.387000, 1648.322447, 1648.322447, 0.000000, X, Y) && !ellipse(20187.416000, 29811.092000, 1528.816044, 1528.816044, 0.000000, X, Y) && !ellipse(22554.098938, 29156.039032, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24361.730499, 28893.148651, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19127.422000, 28671.549000, 589.066417, 589.066417, 0.000000, X, Y) && !ellipse(15232.158000, 29171.086000, 1793.816052, 1793.816052, 0.000000, X, Y) && !ellipse(20733.028400, 28777.001800, 384.563211, 384.563211, 0.000000, X, Y) && !ellipse(22383.558000, 28240.442000, 419.502412, 324.771209, 144.871400, X, Y) && !ellipse(24179.417603, 27704.765503, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16998.336000, 28021.320000, 472.526414, 472.526414, 0.000000, X, Y) && !ellipse(21562.181320, 27962.337860, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18729.291611, 27632.089386, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17629.364746, 27452.699677, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23078.045074, 27519.983429, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15877.693000, 27025.566600, 422.736012, 422.736012, 0.000000, X, Y) && !ellipse(19756.727400, 27298.298200, 411.428812, 411.428812, 0.000000, X, Y) && !ellipse(22073.351924, 26067.043387, 1271.224037, 855.002914, 90.000000, X, Y) && !ellipse(21125.786102, 26396.266174, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23961.217740, 26444.494000, 423.874412, 423.874412, 0.000000, X, Y) && !ellipse(20659.163376, 24998.233948, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24126.476000, 25000.412000, 560.193616, 560.193616, 0.000000, X, Y) && !ellipse(21776.313416, 24847.579620, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(22323.628020, 24407.849600, 326.405609, 326.405609, 0.000000, X, Y) && !ellipse(23330.830000, 24210.506000, 491.886414, 391.720011, 336.610400, X, Y) && !ellipse(20954.680084, 24103.802368, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21705.538820, 23699.626000, 1363.456039, 1363.456039, 0.000000, X, Y) && !ellipse(24540.222809, 24583.207733, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23978.203552, 23299.370972, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21556.306000, 22637.320000, 1335.752038, 1335.752038, 0.000000, X, Y) && !ellipse(22982.344570, 23824.920226, 1566.880045, 1566.880045, 0.000000, X, Y) && !ellipse(24611.849600, 23308.059800, 417.392812, 310.779209, 14.657500, X, Y) && !ellipse(22266.004364, 23102.617371, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18236.517440, 23433.629400, 467.368013, 467.368013, 0.000000, X, Y) && !ellipse(25255.636383, 22982.915375, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24003.910000, 22600.400000, 389.864011, 166.774405, 1.626000, X, Y) && !ellipse(22784.740400, 22243.708000, 1325.552038, 963.808028, 122.357000, X, Y) && !ellipse(20500.867874, 22211.621399, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24996.731201, 21769.565659, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24396.078000, 21602.852000, 326.268009, 326.268009, 0.000000, X, Y) && !ellipse(22530.176000, 21255.860000, 383.764011, 383.764011, 0.000000, X, Y) && !ellipse(18664.765106, 20990.294647, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23488.172760, 19941.397446, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24104.358000, 19563.476000, 526.900815, 359.644810, 11.870500, X, Y) && !ellipse(17124.042313, 19335.608704, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21081.935638, 18902.476517, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jan 24 09:43:00 2012] Writing fullrun_pn_xmm0109270101_pi300-10000_pass1_cl_src85.gif
[Tue Jan 24 12:05:00 2012] Mean detx,y = (4271.54, -1743.38) 
[Tue Jan 24 12:05:07 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jan 24 12:05:53 2012] Binned source spectrum to 10 counts/bin
[Tue Jan 24 12:05:54 2012] Setting source spectrum file to fullrun_pn_xmm0109270101_pi300-10000_pass1_cl_src85_src_b10.pi.gz
[Tue Jan 24 12:05:54 2012] Setting bgd. spectrum file to fullrun_pn_xmm0109270101_pi300-10000_pass1_cl_src85_bgd.pi.gz
[Thu Jan 26 08:24:39 2012] Updating aperture counts using extracted products
[Thu Jan 26 08:24:39 2012] Error reading totcts from fullrun_pn_xmm0109270101_pi300-10000_pass1_cl_src85_src_b10.pi.gz
[Thu Jan 26 08:24:44 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jan 26 08:24:44 2012] Using photon index=1.80, rate=0.0709, arf fullrun_pn_xmm0109270101_pi300-10000_pass1_cl_src85.arf
[Thu Jan 26 08:24:44 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jan 26 08:24:44 2012] Updating source flux to 2.1e-13
[Thu Jan 26 08:41:00 2012] Flag b found in src. 85 procflags, skipping spectral fitting