[Mon Jan 23 01:19:27 2012] Detection parameters:
  Position = (253.7, 274.3) = 0 42 53.58 41 15 19.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 357.0 +/- 37.8
  Background counts = 471.3
  Rate = 0.01 +/- 0.001

[Mon Jan 23 01:19:28 2012] Off-axis axis estimate = 3.69'
[Mon Jan 23 01:24:51 2012] Using EEF radius (= 8.27 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 01:24:51 2012] Initial guess for spatial extent in simple fitting = 8.27"
[Mon Jan 23 01:24:51 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.084
[Mon Jan 23 01:24:51 2012] Giving source the simple spatial ID 71 for pass 0, mean size = 8.27"
[Mon Jan 23 07:50:32 2012] fullrun_pn_xmm0109270101_pi300-10000_cl_pass0_src71.ximg exists
[Mon Jan 23 07:50:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109270101_pi300-10000_cl_pass0_src71.csv
[Mon Jan 23 07:50:32 2012] fullrun_pn_xmm0109270101_pi300-10000_cl_pass0_src71_1.ximg exists
[Mon Jan 23 07:50:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109270101_pi300-10000_cl_pass0_src71.csv
[Mon Jan 23 07:50:32 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109270101_pi300-10000_cl_pass0_src71_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109270101_pi300-10000_cl_pass0_src71.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 07:50:34 2012] fullrun_pn_xmm0109270101_pi300-10000_cl_pass0_tfrozen_src71.ximg exists
[Mon Jan 23 07:50:34 2012] fullrun_pn_xmm0109270101_pi300-10000_cl_pass0_tfrozen_src71_1.ximg exists
[Mon Jan 23 07:50:34 2012] Fit fullrun_pn_xmm0109270101_pi300-10000_cl_pass0_tfrozen_src71 appears to have run properly
[Mon Jan 23 17:32:42 2012] Warning, spatial fit 71 centroid is now closest to src. 74
[Mon Jan 23 17:32:43 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 17:32:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 17:32:43 2012] Assessing source extent using major
[Mon Jan 23 17:32:43 2012] Source does appear to be extended
[Mon Jan 23 17:32:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan 23 17:32:43 2012] Source is confused with source 89
[Mon Jan 23 17:33:50 2012] Using EEF radius (= 8.27 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 17:33:50 2012] Initial guess for spatial extent in simple fitting = 8.27"
[Mon Jan 23 17:33:50 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.084
[Mon Jan 23 17:33:50 2012] Giving source the simple spatial ID 67 for pass 1, mean size = 8.27"
[Tue Jan 24 01:57:40 2012] fullrun_pn_xmm0109270101_pi300-10000_cl_pass1_src67.ximg exists
[Tue Jan 24 01:57:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109270101_pi300-10000_cl_pass1_src67.csv
[Tue Jan 24 01:57:40 2012] fullrun_pn_xmm0109270101_pi300-10000_cl_pass1_src67_1.ximg exists
[Tue Jan 24 01:57:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109270101_pi300-10000_cl_pass1_src67.csv
[Tue Jan 24 01:57:40 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109270101_pi300-10000_cl_pass1_src67_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109270101_pi300-10000_cl_pass1_src67.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 24 01:57:42 2012] fullrun_pn_xmm0109270101_pi300-10000_cl_pass1_tfrozen_src67.ximg exists
[Tue Jan 24 01:57:42 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0109270101_pi300-10000_cl_pass1_tfrozen_src67.csv
[Tue Jan 24 01:57:42 2012] fullrun_pn_xmm0109270101_pi300-10000_cl_pass1_tfrozen_src67_1.ximg exists
[Tue Jan 24 01:57:42 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0109270101_pi300-10000_cl_pass1_tfrozen_src67.csv
[Tue Jan 24 01:57:42 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109270101_pi300-10000_cl_pass1_tfrozen_src67_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109270101_pi300-10000_cl_pass1_tfrozen_src67.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 24 09:41:54 2012] Source 78 is offset by -3.368227 and -6.716806 pixels which is larger than
2 X fitted extent = 1.453720 x 1.453720, not incorporating fit results
[Tue Jan 24 09:41:54 2012] Warning, spatial fit 67 centroid is now closest to src. 92
[Tue Jan 24 09:41:54 2012] Spatial fit model total counts = 2938.970000, observed total counts = 2956.000000
[Tue Jan 24 09:41:54 2012] Offset between fit and detection position for source 78 = 3.872890 pixels
[Tue Jan 24 09:41:54 2012] Warning, changing simple spatial fit ID from 67 to 74
[Tue Jan 24 09:41:54 2012] 2711.500000 total counts/ 1686.580000 bgd. counts: snr = 24.956662
Spatial fit parameters:
  Offset between fit and detection position for source 78 = 3.872890 pixels
  Position = (250.0, 273.0) = 0 42 54.98 41 15 3.7
  Extent = 17.0 (17.0-34.1)", rotation angle = 0
  Source counts = 1024.9 +/- 52.1
  Background counts = 1686.6
  Rate = 0.03 +/- 0.002
[Tue Jan 24 09:41:54 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 09:41:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 09:41:54 2012] Assessing source extent using major axis lower bound
[Tue Jan 24 09:41:54 2012] Source does appear to be extended
[Tue Jan 24 09:41:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 24 09:43:00 2012] Counts = 1024.920000, rescaling region sizes by 2.000000
[Tue Jan 24 09:43:00 2012] XMMSAS src. selection expression = ellipse(21705.538820, 23699.626000, 2045.184059, 2045.184059, 0.000000, X, Y)
[Tue Jan 24 09:43:00 2012] Writing source region out to fullrun_pn_xmm0109270101_pi300-10000_pass1_cl_src78_src.reg
[Tue Jan 24 09:43:00 2012] Extracting stamp from image fullrun_pn_xmm0109270101_pi300-10000_cl_sm2.00.img.gz, (133, 155) - (368, 391)
[Tue Jan 24 09:43:00 2012] XMMSAS bgd. selection expression = annulus(21705.538820, 23699.626000, 6817.280196, 13634.560392, X, Y) && !ellipse(28982.397200, 24296.894740, 1269.674437, 1269.674437, 0.000000, X, Y) && !ellipse(25459.370100, 24867.731200, 1359.120039, 1359.120039, 0.000000, X, Y) && !ellipse(23540.286420, 25309.387000, 1648.322447, 1648.322447, 0.000000, X, Y) && !ellipse(29141.696000, 37911.344000, 2717.312078, 934.536027, 27.193000, X, Y) && !ellipse(29574.816803, 37624.385071, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21730.960205, 36737.061005, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28304.345459, 36643.014557, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23251.741060, 36037.859000, 487.708014, 487.708014, 0.000000, X, Y) && !ellipse(27905.745532, 35011.969373, 1650.112047, 521.413279, 90.000000, X, Y) && !ellipse(23171.600342, 34544.341339, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27716.645400, 34138.567600, 1650.112047, 413.509612, 90.000000, X, Y) && !ellipse(25602.162842, 33778.378662, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27656.990000, 33764.710000, 1536.712044, 1536.712044, 0.000000, X, Y) && !ellipse(29715.819900, 31872.839400, 554.253616, 554.253616, 0.000000, X, Y) && !ellipse(26490.872000, 31745.406000, 401.634412, 401.634412, 0.000000, X, Y) && !ellipse(13053.820007, 31597.203064, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23530.381126, 31368.012800, 1411.015523, 1411.015523, 0.000000, X, Y) && !ellipse(27015.519897, 31265.613800, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19898.138000, 31236.275000, 444.960013, 444.960013, 0.000000, X, Y) && !ellipse(24805.374800, 30917.063200, 533.711215, 419.230412, 102.316800, X, Y) && !ellipse(32093.674356, 30568.015617, 623.468165, 433.917997, 60.006626, X, Y) && !ellipse(20187.416000, 29811.092000, 1528.816044, 1528.816044, 0.000000, X, Y) && !ellipse(30676.608826, 30237.368744, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18959.175995, 29990.108521, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16337.639893, 29954.058533, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26218.768680, 29716.893000, 371.631211, 371.631211, 0.000000, X, Y) && !ellipse(22554.098938, 29156.039032, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26301.773800, 28247.716000, 1143.216033, 1143.216033, 0.000000, X, Y) && !ellipse(24361.730499, 28893.148651, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27113.531960, 29172.179200, 424.492812, 424.492812, 0.000000, X, Y) && !ellipse(19127.422000, 28671.549000, 589.066417, 589.066417, 0.000000, X, Y) && !ellipse(15232.158000, 29171.086000, 1793.816052, 1793.816052, 0.000000, X, Y) && !ellipse(28280.882400, 28687.359400, 454.254413, 454.254413, 0.000000, X, Y) && !ellipse(25818.446000, 28401.988000, 1227.528035, 1227.528035, 0.000000, X, Y) && !ellipse(20733.028400, 28777.001800, 384.563211, 384.563211, 0.000000, X, Y) && !ellipse(22383.558000, 28240.442000, 419.502412, 324.771209, 144.871400, X, Y) && !ellipse(25095.714200, 28094.842400, 434.252812, 434.252812, 0.000000, X, Y) && !ellipse(24179.417603, 27704.765503, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16998.336000, 28021.320000, 472.526414, 472.526414, 0.000000, X, Y) && !ellipse(31198.336840, 27929.361600, 465.448013, 465.448013, 0.000000, X, Y) && !ellipse(21562.181320, 27962.337860, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14342.561800, 27808.596840, 505.836815, 505.836815, 0.000000, X, Y) && !ellipse(18729.291611, 27632.089386, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32412.542640, 27497.862600, 431.600812, 431.600812, 0.000000, X, Y) && !ellipse(17629.364746, 27452.699677, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30749.850464, 27201.637451, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25445.489563, 27251.326324, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23078.045074, 27519.983429, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31429.920288, 27203.028687, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15877.693000, 27025.566600, 422.736012, 422.736012, 0.000000, X, Y) && !ellipse(19756.727400, 27298.298200, 411.428812, 411.428812, 0.000000, X, Y) && !ellipse(32010.454000, 26669.808000, 1406.088040, 1406.088040, 0.000000, X, Y) && !ellipse(22073.351924, 26067.043387, 1271.224037, 855.002914, 90.000000, X, Y) && !ellipse(21125.786102, 26396.266174, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15011.052020, 26556.539600, 376.488811, 376.488811, 0.000000, X, Y) && !ellipse(23961.217740, 26444.494000, 423.874412, 423.874412, 0.000000, X, Y) && !ellipse(30622.256800, 26415.636800, 353.635210, 353.635210, 0.000000, X, Y) && !ellipse(31468.461800, 25753.231000, 400.248012, 400.248012, 0.000000, X, Y) && !ellipse(26511.990936, 25196.697388, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20659.163376, 24998.233948, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29325.605133, 24810.175568, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24126.476000, 25000.412000, 560.193616, 560.193616, 0.000000, X, Y) && !ellipse(21776.313416, 24847.579620, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(28408.749176, 24587.203552, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22323.628020, 24407.849600, 326.405609, 326.405609, 0.000000, X, Y) && !ellipse(33239.633392, 24218.308472, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23330.830000, 24210.506000, 491.886414, 391.720011, 336.610400, X, Y) && !ellipse(20954.680084, 24103.802368, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27128.448914, 25183.531097, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31840.047000, 23822.496800, 461.345613, 321.473609, 90.000000, X, Y) && !ellipse(27809.803772, 23725.216431, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24540.222809, 24583.207733, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26668.727936, 23479.326202, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19963.514760, 24075.468200, 450.054413, 450.054413, 0.000000, X, Y) && !ellipse(23978.203552, 23299.370972, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21556.306000, 22637.320000, 1335.752038, 1335.752038, 0.000000, X, Y) && !ellipse(36063.010132, 23177.635223, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22982.344570, 23824.920226, 1566.880045, 1566.880045, 0.000000, X, Y) && !ellipse(24611.849600, 23308.059800, 417.392812, 310.779209, 14.657500, X, Y) && !ellipse(29293.484214, 22785.091425, 359.538575, 296.876272, 341.191597, X, Y) && !ellipse(22266.004364, 23102.617371, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18236.517440, 23433.629400, 467.368013, 467.368013, 0.000000, X, Y) && !ellipse(12224.324960, 23287.370600, 517.490415, 517.490415, 0.000000, X, Y) && !ellipse(29980.391700, 22496.934600, 421.358412, 296.812809, 5.478170, X, Y) && !ellipse(25255.636383, 22982.915375, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27817.750000, 22553.740000, 1339.496039, 1339.496039, 0.000000, X, Y) && !ellipse(24003.910000, 22600.400000, 389.864011, 166.774405, 1.626000, X, Y) && !ellipse(22784.740400, 22243.708000, 1325.552038, 963.808028, 122.357000, X, Y) && !ellipse(20500.867874, 22211.621399, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25983.260437, 22229.041046, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32866.822144, 21900.175842, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24996.731201, 21769.565659, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28501.186676, 22033.957458, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29106.944440, 21887.385000, 420.348812, 420.348812, 0.000000, X, Y) && !ellipse(24396.078000, 21602.852000, 326.268009, 326.268009, 0.000000, X, Y) && !ellipse(12871.954483, 21697.817474, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22530.176000, 21255.860000, 383.764011, 383.764011, 0.000000, X, Y) && !ellipse(27008.314000, 21482.934000, 343.495210, 343.495210, 0.000000, X, Y) && !ellipse(18664.765106, 20990.294647, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10667.030975, 20667.755051, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30752.601074, 20680.337234, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30047.041940, 20469.680000, 358.435210, 358.435210, 0.000000, X, Y) && !ellipse(27781.882600, 20465.156900, 445.014413, 445.014413, 0.000000, X, Y) && !ellipse(23488.172760, 19941.397446, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24104.358000, 19563.476000, 526.900815, 359.644810, 11.870500, X, Y) && !ellipse(17124.042313, 19335.608704, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21081.935638, 18902.476517, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31496.519043, 18568.362320, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25049.659210, 18261.967957, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32483.321747, 18142.466415, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13281.187424, 18457.485641, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19881.477417, 17889.829758, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27798.615479, 17612.056610, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28994.756622, 14768.937073, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14011.850159, 14982.441254, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17348.510437, 14414.963257, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15349.853500, 12780.812637, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25610.098724, 12128.706909, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32428.094482, 11198.494827, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27678.329376, 11153.596954, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27117.034943, 11102.846069, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16917.847427, 10136.844193, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26712.225281, 9754.243187, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jan 24 09:43:00 2012] Writing fullrun_pn_xmm0109270101_pi300-10000_pass1_cl_src78.gif
[Tue Jan 24 11:46:13 2012] Mean detx,y = (2280.10, -1022.00) 
[Tue Jan 24 11:46:29 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jan 24 11:52:53 2012] Binned source spectrum to 10 counts/bin
[Tue Jan 24 11:52:54 2012] Setting source spectrum file to fullrun_pn_xmm0109270101_pi300-10000_pass1_cl_src78_src_b10.pi.gz
[Tue Jan 24 11:52:54 2012] Setting bgd. spectrum file to fullrun_pn_xmm0109270101_pi300-10000_pass1_cl_src78_bgd.pi.gz
[Thu Jan 26 08:24:39 2012] Updating aperture counts using extracted products
[Thu Jan 26 08:24:39 2012] Error reading totcts from fullrun_pn_xmm0109270101_pi300-10000_pass1_cl_src78_src_b10.pi.gz
[Thu Jan 26 08:24:44 2012] No arf file for this source, not re-computing flux
[Thu Jan 26 08:41:00 2012] Flag b found in src. 78 procflags, skipping spectral fitting
[Thu Jan 26 08:41:00 2012] Flag c found in src. 78 procflags, skipping spectral fitting
[Thu Jan 26 08:41:00 2012] Source 78 has no response, skipping