[Mon Jan 23 01:19:27 2012] Detection parameters:
  Position = (257.0, 282.3) = 0 42 52.29 41 15 39.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 13337.7 +/- 143.4
  Background counts = 497.9
  Rate = 0.3 +/- 0.004

[Mon Jan 23 01:19:28 2012] Off-axis axis estimate = 3.22'
[Mon Jan 23 01:24:51 2012] Using EEF radius (= 8.04 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 01:24:51 2012] Initial guess for spatial extent in simple fitting = 8.04"
[Mon Jan 23 01:24:51 2012] source mask rpix=1.8, npix_max = 22, mask sum = 15, frac = 0.680
[Mon Jan 23 01:24:51 2012] Giving source the simple spatial ID 68 for pass 0, mean size = 8.04"
[Mon Jan 23 07:50:32 2012] fullrun_pn_xmm0109270101_pi300-10000_cl_pass0_src68.ximg exists
[Mon Jan 23 07:50:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109270101_pi300-10000_cl_pass0_src68.csv
[Mon Jan 23 07:50:32 2012] fullrun_pn_xmm0109270101_pi300-10000_cl_pass0_src68_1.ximg exists
[Mon Jan 23 07:50:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109270101_pi300-10000_cl_pass0_src68.csv
[Mon Jan 23 07:50:32 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109270101_pi300-10000_cl_pass0_src68_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109270101_pi300-10000_cl_pass0_src68.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 07:50:33 2012] fullrun_pn_xmm0109270101_pi300-10000_cl_pass0_tfrozen_src68.ximg exists
[Mon Jan 23 07:50:34 2012] fullrun_pn_xmm0109270101_pi300-10000_cl_pass0_tfrozen_src68_1.ximg exists
[Mon Jan 23 07:50:34 2012] Fit fullrun_pn_xmm0109270101_pi300-10000_cl_pass0_tfrozen_src68 appears to have run properly
[Mon Jan 23 17:32:42 2012] Spatial fit model total counts = 16123.400000, observed total counts = 16117.000000
[Mon Jan 23 17:32:42 2012] Offset between fit and detection position for source 74 = 1.281045 pixels
[Mon Jan 23 17:32:42 2012] Warning, changing simple spatial fit ID from 68 to 67
[Mon Jan 23 17:32:42 2012] 16924.250000 total counts/ 13425.400000 bgd. counts: snr = 30.196855
Spatial fit parameters:
  Offset between fit and detection position for source 74 = 1.281045 pixels
  Position = (257.0, 281.1) = 0 42 52.28 41 15 38.9
  Extent = 3.4 (3.4-3.5)", rotation angle = 0
  Source counts = 3498.8 +/- 130.1
  Background counts = 13425.4
  Rate = 0.1 +/- 0.004
[Mon Jan 23 17:32:42 2012] Spatial fit model total counts = 19135.400000, observed total counts = 18988.000000
[Mon Jan 23 17:32:42 2012] Offset between fit and detection position for source 74 = 0.146699 pixels
[Mon Jan 23 17:32:42 2012] Warning, changing simple spatial fit ID from 67 to 68
[Mon Jan 23 17:32:42 2012] 19431.740000 total counts/ 14522.200000 bgd. counts: snr = 40.740335
Spatial fit parameters:
  Offset between fit and detection position for source 74 = 0.146699 pixels
  Position = (257.2, 281.1) = 0 42 52.23 41 15 39.2
  Extent = 4.2 (4.1-4.2)", rotation angle = 0
  Source counts = 4909.5 +/- 139.4
  Background counts = 14522.2
  Rate = 0.2 +/- 0.004
[Mon Jan 23 17:32:42 2012] Spatial fit model total counts = 9218.450000, observed total counts = 9217.000000
[Mon Jan 23 17:32:42 2012] Offset between fit and detection position for source 74 = 0.135814 pixels
[Mon Jan 23 17:32:42 2012] Warning, changing simple spatial fit ID from 68 to 71
[Mon Jan 23 17:32:42 2012] 9210.880000 total counts/ 3920.800000 bgd. counts: snr = 84.484083
Spatial fit parameters:
  Offset between fit and detection position for source 74 = 0.135814 pixels
  Position = (257.1, 281.3) = 0 42 52.24 41 15 39.8
  Extent = 4.8 (4.7-4.9)", rotation angle = 0
  Source counts = 5290.1 +/- 96.0
  Background counts = 3920.8
  Rate = 0.2 +/- 0.003
[Mon Jan 23 17:32:43 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 17:32:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 17:32:43 2012] Assessing source extent using major axis lower bound
[Mon Jan 23 17:32:43 2012] Source does appear to be extended
[Mon Jan 23 17:32:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan 23 17:32:43 2012] Source is confused with source 89
[Mon Jan 23 17:33:50 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jan 23 17:33:50 2012] Initial guess for spatial extent in simple fitting = 4.78"
[Mon Jan 23 17:33:50 2012] source mask rpix=1.1, npix_max = 10, mask sum = 6, frac = 0.587
[Mon Jan 23 17:33:50 2012] Giving source the simple spatial ID 64 for pass 1, mean size = 4.78"
[Tue Jan 24 01:57:40 2012] fullrun_pn_xmm0109270101_pi300-10000_cl_pass1_src64.ximg exists
[Tue Jan 24 01:57:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109270101_pi300-10000_cl_pass1_src64.csv
[Tue Jan 24 01:57:40 2012] fullrun_pn_xmm0109270101_pi300-10000_cl_pass1_src64_1.ximg exists
[Tue Jan 24 01:57:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109270101_pi300-10000_cl_pass1_src64.csv
[Tue Jan 24 01:57:40 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109270101_pi300-10000_cl_pass1_src64_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109270101_pi300-10000_cl_pass1_src64.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 24 01:57:41 2012] fullrun_pn_xmm0109270101_pi300-10000_cl_pass1_tfrozen_src64.ximg exists
[Tue Jan 24 01:57:42 2012] fullrun_pn_xmm0109270101_pi300-10000_cl_pass1_tfrozen_src64_1.ximg exists
[Tue Jan 24 01:57:42 2012] Fit fullrun_pn_xmm0109270101_pi300-10000_cl_pass1_tfrozen_src64 appears to have run properly
[Tue Jan 24 09:41:54 2012] Spatial fit model total counts = 18784.000000, observed total counts = 18733.000000
[Tue Jan 24 09:41:54 2012] Offset between fit and detection position for source 74 = 0.147034 pixels
[Tue Jan 24 09:41:54 2012] 18864.880000 total counts/ 14043.000000 bgd. counts: snr = 40.689884
Spatial fit parameters:
  Offset between fit and detection position for source 74 = 0.147034 pixels
  Position = (257.2, 281.1) = 0 42 52.24 41 15 39.1
  Extent = 4.1 (4.0-4.2)", rotation angle = 0
  Source counts = 4821.9 +/- 137.3
  Background counts = 14043.0
  Rate = 0.1 +/- 0.004
[Tue Jan 24 09:41:54 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 09:41:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 09:41:54 2012] Assessing source extent using major axis lower bound
[Tue Jan 24 09:41:54 2012] Source does appear to be extended
[Tue Jan 24 09:41:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 24 09:42:59 2012] Counts = 4821.880000, rescaling region sizes by 2.000000
[Tue Jan 24 09:42:59 2012] XMMSAS src. selection expression = ellipse(22323.628020, 24407.849600, 489.608414, 489.608414, 0.000000, X, Y)
[Tue Jan 24 09:42:59 2012] Writing source region out to fullrun_pn_xmm0109270101_pi300-10000_pass1_cl_src74_src.reg
[Tue Jan 24 09:42:59 2012] Extracting stamp from image fullrun_pn_xmm0109270101_pi300-10000_cl_sm2.00.img.gz, (229, 253) - (285, 309)
[Tue Jan 24 09:42:59 2012] XMMSAS bgd. selection expression = annulus(22323.628020, 24407.849600, 1632.028047, 3264.056094, X, Y) && !ellipse(25459.370100, 24867.731200, 1359.120039, 1359.120039, 0.000000, X, Y) && !ellipse(23540.286420, 25309.387000, 1648.322447, 1648.322447, 0.000000, X, Y) && !ellipse(26301.773800, 28247.716000, 1143.216033, 1143.216033, 0.000000, X, Y) && !ellipse(25818.446000, 28401.988000, 1227.528035, 1227.528035, 0.000000, X, Y) && !ellipse(25095.714200, 28094.842400, 434.252812, 434.252812, 0.000000, X, Y) && !ellipse(24179.417603, 27704.765503, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21562.181320, 27962.337860, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18729.291611, 27632.089386, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25445.489563, 27251.326324, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23078.045074, 27519.983429, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19756.727400, 27298.298200, 411.428812, 411.428812, 0.000000, X, Y) && !ellipse(22073.351924, 26067.043387, 1271.224037, 855.002914, 90.000000, X, Y) && !ellipse(21125.786102, 26396.266174, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23961.217740, 26444.494000, 423.874412, 423.874412, 0.000000, X, Y) && !ellipse(20659.163376, 24998.233948, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24126.476000, 25000.412000, 560.193616, 560.193616, 0.000000, X, Y) && !ellipse(21776.313416, 24847.579620, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(23330.830000, 24210.506000, 491.886414, 391.720011, 336.610400, X, Y) && !ellipse(20954.680084, 24103.802368, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21705.538820, 23699.626000, 1363.456039, 1363.456039, 0.000000, X, Y) && !ellipse(24540.222809, 24583.207733, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19963.514760, 24075.468200, 450.054413, 450.054413, 0.000000, X, Y) && !ellipse(23978.203552, 23299.370972, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21556.306000, 22637.320000, 1335.752038, 1335.752038, 0.000000, X, Y) && !ellipse(22982.344570, 23824.920226, 1566.880045, 1566.880045, 0.000000, X, Y) && !ellipse(24611.849600, 23308.059800, 417.392812, 310.779209, 14.657500, X, Y) && !ellipse(22266.004364, 23102.617371, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25255.636383, 22982.915375, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24003.910000, 22600.400000, 389.864011, 166.774405, 1.626000, X, Y) && !ellipse(22784.740400, 22243.708000, 1325.552038, 963.808028, 122.357000, X, Y) && !ellipse(20500.867874, 22211.621399, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25983.260437, 22229.041046, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24996.731201, 21769.565659, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24396.078000, 21602.852000, 326.268009, 326.268009, 0.000000, X, Y) && !ellipse(22530.176000, 21255.860000, 383.764011, 383.764011, 0.000000, X, Y) && !ellipse(18664.765106, 20990.294647, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jan 24 09:42:59 2012] Writing fullrun_pn_xmm0109270101_pi300-10000_pass1_cl_src74.gif
[Tue Jan 24 11:40:42 2012] Mean detx,y = (2079.58, -801.95) 
[Tue Jan 24 11:40:51 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jan 24 11:41:22 2012] Binned source spectrum to 10 counts/bin
[Tue Jan 24 11:41:22 2012] Setting source spectrum file to fullrun_pn_xmm0109270101_pi300-10000_pass1_cl_src74_src_b10.pi.gz
[Tue Jan 24 11:41:22 2012] Setting bgd. spectrum file to fullrun_pn_xmm0109270101_pi300-10000_pass1_cl_src74_bgd.pi.gz
[Thu Jan 26 08:24:39 2012] Updating aperture counts using extracted products
[Thu Jan 26 08:24:39 2012] Error reading totcts from fullrun_pn_xmm0109270101_pi300-10000_pass1_cl_src74_src_b10.pi.gz
[Thu Jan 26 08:24:44 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jan 26 08:24:44 2012] Using photon index=1.80, rate=0.149, arf fullrun_pn_xmm0109270101_pi300-10000_pass1_cl_src74.arf
[Thu Jan 26 08:24:44 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jan 26 08:24:44 2012] Updating source flux to 4.8e-13
[Thu Jan 26 08:41:00 2012] Flag c found in src. 74 procflags, skipping spectral fitting