[Mon Jan 23 01:19:27 2012] Detection parameters:
  Position = (173.2, 306.0) = 0 43 24.64 41 17 27.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 275.5 +/- 29.1
  Background counts = 262.5
  Rate = 0.009 +/- 0.0009

[Mon Jan 23 01:19:28 2012] Off-axis axis estimate = 9.10'
[Mon Jan 23 01:24:51 2012] Using EEF radius (= 10.98 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 01:24:51 2012] Initial guess for spatial extent in simple fitting = 10.98"
[Mon Jan 23 01:24:51 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.985
[Mon Jan 23 01:24:51 2012] Giving source the simple spatial ID 59 for pass 0, mean size = 10.98"
[Mon Jan 23 07:50:32 2012] fullrun_pn_xmm0109270101_pi300-10000_cl_pass0_src59.ximg exists
[Mon Jan 23 07:50:32 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0109270101_pi300-10000_cl_pass0_src59.csv
[Mon Jan 23 07:50:32 2012] fullrun_pn_xmm0109270101_pi300-10000_cl_pass0_src59_1.ximg exists
[Mon Jan 23 07:50:32 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0109270101_pi300-10000_cl_pass0_src59.csv
[Mon Jan 23 07:50:32 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109270101_pi300-10000_cl_pass0_src59_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109270101_pi300-10000_cl_pass0_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 07:50:33 2012] fullrun_pn_xmm0109270101_pi300-10000_cl_pass0_tfrozen_src59.ximg exists
[Mon Jan 23 07:50:33 2012] fullrun_pn_xmm0109270101_pi300-10000_cl_pass0_tfrozen_src59_1.ximg exists
[Mon Jan 23 07:50:33 2012] Fit fullrun_pn_xmm0109270101_pi300-10000_cl_pass0_tfrozen_src59 appears to have run properly
[Mon Jan 23 17:32:42 2012] Warning: source 59 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 64 at 13.436060 pixels away
[Mon Jan 23 17:32:43 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 17:32:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 17:32:43 2012] Assessing source extent using major
[Mon Jan 23 17:32:43 2012] Source does appear to be extended
[Mon Jan 23 17:32:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan 23 17:33:50 2012] Using EEF radius (= 10.98 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 17:33:50 2012] Initial guess for spatial extent in simple fitting = 10.98"
[Mon Jan 23 17:33:50 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.985
[Mon Jan 23 17:33:50 2012] Giving source the simple spatial ID 55 for pass 1, mean size = 10.98"
[Tue Jan 24 01:57:39 2012] fullrun_pn_xmm0109270101_pi300-10000_cl_pass1_src55.ximg exists
[Tue Jan 24 01:57:39 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0109270101_pi300-10000_cl_pass1_src55.csv
[Tue Jan 24 01:57:39 2012] fullrun_pn_xmm0109270101_pi300-10000_cl_pass1_src55_1.ximg exists
[Tue Jan 24 01:57:39 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0109270101_pi300-10000_cl_pass1_src55.csv
[Tue Jan 24 01:57:39 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109270101_pi300-10000_cl_pass1_src55_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109270101_pi300-10000_cl_pass1_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 24 01:57:41 2012] fullrun_pn_xmm0109270101_pi300-10000_cl_pass1_tfrozen_src55.ximg exists
[Tue Jan 24 01:57:41 2012] fullrun_pn_xmm0109270101_pi300-10000_cl_pass1_tfrozen_src55_1.ximg exists
[Tue Jan 24 01:57:41 2012] Fit fullrun_pn_xmm0109270101_pi300-10000_cl_pass1_tfrozen_src55 appears to have run properly
[Tue Jan 24 09:41:54 2012] Spatial fit model total counts = 821.000000, observed total counts = 821.000000
[Tue Jan 24 09:41:54 2012] Offset between fit and detection position for source 64 = 0.227707 pixels
[Tue Jan 24 09:41:54 2012] 849.562000 total counts/ 727.668000 bgd. counts: snr = 4.518723
Spatial fit parameters:
  Offset between fit and detection position for source 64 = 0.227707 pixels
  Position = (173.1, 305.8) = 0 43 24.69 41 17 26.0
  Extent = 4.7 (3.8-5.8)", rotation angle = 0
  Source counts = 121.9 +/- 29.1
  Background counts = 727.7
  Rate = 0.004 +/- 0.0009
[Tue Jan 24 09:41:54 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 09:41:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 09:41:54 2012] Assessing source extent using major axis lower bound
[Tue Jan 24 09:41:54 2012] Source does appear to be extended
[Tue Jan 24 09:41:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 24 09:42:58 2012] XMMSAS src. selection expression = ellipse(15011.052020, 26556.539600, 282.366608, 282.366608, 0.000000, X, Y)
[Tue Jan 24 09:42:58 2012] Writing source region out to fullrun_pn_xmm0109270101_pi300-10000_pass1_cl_src64_src.reg
[Tue Jan 24 09:42:58 2012] Extracting stamp from image fullrun_pn_xmm0109270101_pi300-10000_cl_sm2.00.img.gz, (157, 290) - (189, 322)
[Tue Jan 24 09:42:58 2012] XMMSAS bgd. selection expression = annulus(15011.052020, 26556.539600, 470.611014, 941.222027, X, Y) && !ellipse(15232.158000, 29171.086000, 1793.816052, 1793.816052, 0.000000, X, Y) && !ellipse(14342.561800, 27808.596840, 505.836815, 505.836815, 0.000000, X, Y) && !ellipse(15877.693000, 27025.566600, 422.736012, 422.736012, 0.000000, X, Y)
[Tue Jan 24 09:42:58 2012] Writing fullrun_pn_xmm0109270101_pi300-10000_pass1_cl_src64.gif
[Tue Jan 24 11:08:10 2012] Mean detx,y = (9686.47, -488.46) 
[Tue Jan 24 11:08:15 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jan 24 11:08:38 2012] Binned source spectrum to 10 counts/bin
[Tue Jan 24 11:08:39 2012] Setting source spectrum file to fullrun_pn_xmm0109270101_pi300-10000_pass1_cl_src64_src_b10.pi.gz
[Tue Jan 24 11:08:39 2012] Setting bgd. spectrum file to fullrun_pn_xmm0109270101_pi300-10000_pass1_cl_src64_bgd.pi.gz
[Thu Jan 26 08:24:38 2012] Updating aperture counts using extracted products
[Thu Jan 26 08:24:38 2012] Error reading totcts from fullrun_pn_xmm0109270101_pi300-10000_pass1_cl_src64_src_b10.pi.gz
[Thu Jan 26 08:24:44 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jan 26 08:24:44 2012] Using photon index=1.80, rate=0.00376, arf fullrun_pn_xmm0109270101_pi300-10000_pass1_cl_src64.arf
[Thu Jan 26 08:24:44 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jan 26 08:24:44 2012] Updating source flux to 1.9e-14