[Mon Jan 23 01:19:26 2012] Detection parameters:
  Position = (250.3, 422.8) = 0 42 54.91 41 25 56.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1024.2 +/- 44.8
  Background counts = 224.4
  Rate = 0.02 +/- 0.0009

[Mon Jan 23 01:19:28 2012] Off-axis axis estimate = 9.67'
[Mon Jan 23 01:24:51 2012] Using EEF radius (= 11.26 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 01:24:51 2012] Initial guess for spatial extent in simple fitting = 11.26"
[Mon Jan 23 01:24:51 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.943
[Mon Jan 23 01:24:51 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 11.26"
[Mon Jan 23 07:50:31 2012] fullrun_pn_xmm0109270101_pi300-10000_cl_pass0_src6.ximg exists
[Mon Jan 23 07:50:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109270101_pi300-10000_cl_pass0_src6.csv
[Mon Jan 23 07:50:31 2012] fullrun_pn_xmm0109270101_pi300-10000_cl_pass0_src6_1.ximg exists
[Mon Jan 23 07:50:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109270101_pi300-10000_cl_pass0_src6.csv
[Mon Jan 23 07:50:31 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109270101_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109270101_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 07:50:32 2012] fullrun_pn_xmm0109270101_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Mon Jan 23 07:50:32 2012] fullrun_pn_xmm0109270101_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Mon Jan 23 07:50:32 2012] Fit fullrun_pn_xmm0109270101_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Mon Jan 23 17:32:42 2012] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 15.277410 pixels away
[Mon Jan 23 17:32:43 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 17:32:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 17:32:43 2012] Assessing source extent using major
[Mon Jan 23 17:32:43 2012] Source does appear to be extended
[Mon Jan 23 17:32:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan 23 17:33:50 2012] Using EEF radius (= 11.26 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 17:33:50 2012] Initial guess for spatial extent in simple fitting = 11.26"
[Mon Jan 23 17:33:50 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.943
[Mon Jan 23 17:33:50 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 11.26"
[Tue Jan 24 01:57:39 2012] fullrun_pn_xmm0109270101_pi300-10000_cl_pass1_src6.ximg exists
[Tue Jan 24 01:57:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109270101_pi300-10000_cl_pass1_src6.csv
[Tue Jan 24 01:57:39 2012] fullrun_pn_xmm0109270101_pi300-10000_cl_pass1_src6_1.ximg exists
[Tue Jan 24 01:57:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109270101_pi300-10000_cl_pass1_src6.csv
[Tue Jan 24 01:57:39 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109270101_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109270101_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 24 01:57:40 2012] fullrun_pn_xmm0109270101_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Tue Jan 24 01:57:40 2012] fullrun_pn_xmm0109270101_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Tue Jan 24 01:57:40 2012] Fit fullrun_pn_xmm0109270101_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly
[Tue Jan 24 09:41:54 2012] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 14.094286 pixels away
[Tue Jan 24 09:41:54 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 09:41:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 09:41:54 2012] Assessing source extent using major
[Tue Jan 24 09:41:54 2012] Source does appear to be extended
[Tue Jan 24 09:41:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 24 09:42:56 2012] Counts = 1024.203247, rescaling region sizes by 2.000000
[Tue Jan 24 09:42:56 2012] XMMSAS src. selection expression = ellipse(21730.960205, 36737.061005, 1305.000000, 1305.000000, 0.000000, X, Y)
[Tue Jan 24 09:42:56 2012] Writing source region out to fullrun_pn_xmm0109270101_pi300-10000_pass1_cl_src6_src.reg
[Tue Jan 24 09:42:56 2012] Extracting stamp from image fullrun_pn_xmm0109270101_pi300-10000_cl_sm2.00.img.gz, (175, 348) - (325, 498)
[Tue Jan 24 09:42:56 2012] XMMSAS bgd. selection expression = annulus(21730.960205, 36737.061005, 4350.000000, 8700.000000, X, Y) && !ellipse(29141.696000, 37911.344000, 2717.312078, 934.536027, 27.193000, X, Y) && !ellipse(29574.816803, 37624.385071, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28304.345459, 36643.014557, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23251.741060, 36037.859000, 487.708014, 487.708014, 0.000000, X, Y) && !ellipse(27905.745532, 35011.969373, 1650.112047, 521.413279, 90.000000, X, Y) && !ellipse(23171.600342, 34544.341339, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27716.645400, 34138.567600, 1650.112047, 413.509612, 90.000000, X, Y) && !ellipse(25602.162842, 33778.378662, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27656.990000, 33764.710000, 1536.712044, 1536.712044, 0.000000, X, Y) && !ellipse(29715.819900, 31872.839400, 554.253616, 554.253616, 0.000000, X, Y) && !ellipse(26490.872000, 31745.406000, 401.634412, 401.634412, 0.000000, X, Y) && !ellipse(13053.820007, 31597.203064, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23530.381126, 31368.012800, 1411.015523, 1411.015523, 0.000000, X, Y) && !ellipse(27015.519897, 31265.613800, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19898.138000, 31236.275000, 444.960013, 444.960013, 0.000000, X, Y) && !ellipse(24805.374800, 30917.063200, 533.711215, 419.230412, 102.316800, X, Y) && !ellipse(20187.416000, 29811.092000, 1528.816044, 1528.816044, 0.000000, X, Y) && !ellipse(30676.608826, 30237.368744, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18959.175995, 29990.108521, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16337.639893, 29954.058533, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26218.768680, 29716.893000, 371.631211, 371.631211, 0.000000, X, Y) && !ellipse(22554.098938, 29156.039032, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26301.773800, 28247.716000, 1143.216033, 1143.216033, 0.000000, X, Y) && !ellipse(24361.730499, 28893.148651, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27113.531960, 29172.179200, 424.492812, 424.492812, 0.000000, X, Y) && !ellipse(19127.422000, 28671.549000, 589.066417, 589.066417, 0.000000, X, Y) && !ellipse(15232.158000, 29171.086000, 1793.816052, 1793.816052, 0.000000, X, Y) && !ellipse(28280.882400, 28687.359400, 454.254413, 454.254413, 0.000000, X, Y) && !ellipse(25818.446000, 28401.988000, 1227.528035, 1227.528035, 0.000000, X, Y) && !ellipse(20733.028400, 28777.001800, 384.563211, 384.563211, 0.000000, X, Y) && !ellipse(22383.558000, 28240.442000, 419.502412, 324.771209, 144.871400, X, Y) && !ellipse(25095.714200, 28094.842400, 434.252812, 434.252812, 0.000000, X, Y) && !ellipse(24179.417603, 27704.765503, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16998.336000, 28021.320000, 472.526414, 472.526414, 0.000000, X, Y) && !ellipse(21562.181320, 27962.337860, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14342.561800, 27808.596840, 505.836815, 505.836815, 0.000000, X, Y) && !ellipse(18729.291611, 27632.089386, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17629.364746, 27452.699677, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30749.850464, 27201.637451, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25445.489563, 27251.326324, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23078.045074, 27519.983429, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jan 24 09:42:56 2012] Writing fullrun_pn_xmm0109270101_pi300-10000_pass1_cl_src6.gif
[Tue Jan 24 09:56:22 2012] Mean detx,y = (5457.19, 10955.55) 
[Tue Jan 24 09:56:26 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jan 24 09:58:37 2012] Binned source spectrum to 10 counts/bin
[Tue Jan 24 09:58:38 2012] Setting source spectrum file to fullrun_pn_xmm0109270101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Tue Jan 24 09:58:38 2012] Setting bgd. spectrum file to fullrun_pn_xmm0109270101_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Tue Jan 24 14:12:55 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Jan 24 14:12:55 2012] rmf not generated due to insufficient counts
[Thu Jan 26 08:24:37 2012] Updating aperture counts using extracted products
[Thu Jan 26 08:24:37 2012] Error reading totcts from fullrun_pn_xmm0109270101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Thu Jan 26 08:24:41 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jan 26 08:24:41 2012] Using photon index=1.80, rate=0.0195, arf fullrun_pn_xmm0109270101_pi300-10000_pass1_cl_src6.arf
[Thu Jan 26 08:24:41 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jan 26 08:24:41 2012] Updating source flux to 8.9e-14
[Thu Jan 26 08:41:00 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting