[Mon Jan 23 01:20:38 2012] Detection parameters:
  Position = (266.5, 311.0) = 0 42 48.65 41 17 50.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 137.6 +/- 24.2
  Background counts = 129.7
  Rate = 0.003 +/- 0.0005

[Mon Jan 23 01:20:39 2012] Off-axis axis estimate = 2.49'
[Mon Jan 23 12:14:50 2012] Using EEF radius (= 7.67 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 12:14:50 2012] Initial guess for spatial extent in simple fitting = 7.67"
[Mon Jan 23 12:14:50 2012] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.975
[Mon Jan 23 12:14:50 2012] Giving source the simple spatial ID 96 for pass 0, mean size = 7.67"
[Mon Jan 23 17:32:17 2012] fullrun_mos2_xmm0109270101_pi300-10000_cl_pass0_src96.ximg exists
[Mon Jan 23 17:32:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109270101_pi300-10000_cl_pass0_src96.csv
[Mon Jan 23 17:32:17 2012] fullrun_mos2_xmm0109270101_pi300-10000_cl_pass0_src96_1.ximg exists
[Mon Jan 23 17:32:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109270101_pi300-10000_cl_pass0_src96.csv
[Mon Jan 23 17:32:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109270101_pi300-10000_cl_pass0_src96_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109270101_pi300-10000_cl_pass0_src96.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 17:32:19 2012] fullrun_mos2_xmm0109270101_pi300-10000_cl_pass0_tfrozen_src96.ximg exists
[Mon Jan 23 17:32:19 2012] fullrun_mos2_xmm0109270101_pi300-10000_cl_pass0_tfrozen_src96_1.ximg exists
[Mon Jan 23 17:32:19 2012] Fit fullrun_mos2_xmm0109270101_pi300-10000_cl_pass0_tfrozen_src96 appears to have run properly
[Mon Jan 23 17:33:21 2012] Source 88 is offset by -7.062688 and 5.279686 pixels which is larger than
2 X fitted extent = 1.646322 x 5.712506, not incorporating fit results
[Mon Jan 23 17:33:21 2012] Source 88 is offset by -6.601308 and 6.096334 pixels which is larger than
2 X fitted extent = 4.524483 x 4.524483, not incorporating fit results
[Mon Jan 23 17:33:21 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 17:33:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 17:33:21 2012] Assessing source extent using major
[Mon Jan 23 17:33:21 2012] Source does appear to be extended
[Mon Jan 23 17:33:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan 23 17:33:21 2012] Source is confused with source 59
[Tue Jan 24 05:38:40 2012] Using EEF radius (= 7.67 ")to estimate initial spatial extent for simple fitting
[Tue Jan 24 05:38:40 2012] Initial guess for spatial extent in simple fitting = 7.67"
[Tue Jan 24 05:38:40 2012] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.975
[Tue Jan 24 05:38:40 2012] Giving source the simple spatial ID 88 for pass 1, mean size = 7.67"
[Tue Jan 24 09:41:30 2012] fullrun_mos2_xmm0109270101_pi300-10000_cl_pass1_src88.ximg exists
[Tue Jan 24 09:41:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109270101_pi300-10000_cl_pass1_src88.csv
[Tue Jan 24 09:41:30 2012] fullrun_mos2_xmm0109270101_pi300-10000_cl_pass1_src88_1.ximg exists
[Tue Jan 24 09:41:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109270101_pi300-10000_cl_pass1_src88.csv
[Tue Jan 24 09:41:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109270101_pi300-10000_cl_pass1_src88_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109270101_pi300-10000_cl_pass1_src88.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 24 09:41:31 2012] fullrun_mos2_xmm0109270101_pi300-10000_cl_pass1_tfrozen_src88.ximg exists
[Tue Jan 24 09:41:31 2012] fullrun_mos2_xmm0109270101_pi300-10000_cl_pass1_tfrozen_src88_1.ximg exists
[Tue Jan 24 09:41:31 2012] Fit fullrun_mos2_xmm0109270101_pi300-10000_cl_pass1_tfrozen_src88 appears to have run properly
[Tue Jan 24 09:42:28 2012] Warning, spatial fit 88 centroid is now closest to src. 59
[Tue Jan 24 09:42:28 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 09:42:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 09:42:28 2012] Assessing source extent using major
[Tue Jan 24 09:42:28 2012] Source does appear to be extended
[Tue Jan 24 09:42:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan 26 04:06:51 2012] XMMSAS src. selection expression = ellipse(23133.158173, 27011.909058, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jan 26 04:06:51 2012] Writing source region out to fullrun_mos2_xmm0109270101_pi300-10000_pass1_cl_src88_src.reg
[Thu Jan 26 04:06:51 2012] Extracting stamp from image fullrun_mos2_xmm0109270101_pi300-10000_cl_sm2.00.img.gz, (229, 274) - (304, 349)
[Thu Jan 26 04:06:51 2012] XMMSAS bgd. selection expression = annulus(23133.158173, 27011.909058, 1087.500000, 2175.000000, X, Y) && !ellipse(25488.967800, 24846.103000, 2391.876069, 2391.876069, 0.000000, X, Y) && !ellipse(23537.905620, 25323.553600, 513.550415, 513.550415, 0.000000, X, Y) && !ellipse(22323.018340, 28291.547000, 402.354412, 402.354412, 0.000000, X, Y) && !ellipse(21770.362400, 24867.466600, 352.270410, 352.270410, 0.000000, X, Y) && !ellipse(24573.510000, 24546.796000, 3483.504100, 3483.504100, 0.000000, X, Y) && !ellipse(20659.395691, 24888.589203, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20712.211000, 28783.678800, 380.374411, 380.374411, 0.000000, X, Y) && !ellipse(24531.758000, 24679.156000, 1089.680031, 1089.680031, 0.000000, X, Y) && !ellipse(24299.400420, 25429.616240, 349.140810, 349.140810, 0.000000, X, Y) && !ellipse(23971.951540, 26454.552400, 306.027209, 306.027209, 0.000000, X, Y) && !ellipse(23063.097600, 27520.672000, 254.913607, 254.913607, 0.000000, X, Y) && !ellipse(20775.262497, 25690.556732, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25076.288240, 28091.515600, 419.116812, 419.116812, 0.000000, X, Y) && !ellipse(25239.166000, 25614.782000, 1047.432030, 1047.432030, 0.000000, X, Y) && !ellipse(22203.929779, 26047.320984, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24734.247040, 26733.192047, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24210.398000, 28147.196000, 1114.152032, 1114.152032, 0.000000, X, Y) && !ellipse(22086.977066, 27187.974670, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jan 26 04:06:51 2012] Writing fullrun_mos2_xmm0109270101_pi300-10000_pass1_cl_src88.gif
[Thu Jan 26 05:14:00 2012] Mean detx,y = (-1799.19, -2039.88) 
[Thu Jan 26 05:14:01 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jan 26 05:14:12 2012] Binned source spectrum to 10 counts/bin
[Thu Jan 26 05:14:12 2012] Setting source spectrum file to fullrun_mos2_xmm0109270101_pi300-10000_pass1_cl_src88_src_b10.pi.gz
[Thu Jan 26 05:14:12 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0109270101_pi300-10000_pass1_cl_src88_bgd.pi.gz
[Thu Jan 26 08:11:42 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jan 26 08:11:42 2012] rmf not generated due to insufficient counts
[Thu Jan 26 08:24:54 2012] Updating aperture counts using extracted products
[Thu Jan 26 08:24:54 2012] Error reading totcts from fullrun_mos2_xmm0109270101_pi300-10000_pass1_cl_src88_src_b10.pi.gz
[Thu Jan 26 08:24:56 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jan 26 08:24:56 2012] Using photon index=1.80, rate=0.00262, arf fullrun_mos2_xmm0109270101_pi300-10000_pass1_cl_src88.arf
[Thu Jan 26 08:24:56 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jan 26 08:24:56 2012] Updating source flux to 2.5e-14
[Thu Jan 26 08:34:08 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting