[Mon Jan 23 01:20:38 2012] Detection parameters:
  Position = (278.8, 317.9) = 0 42 43.90 41 18 19.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 120.1 +/- 20.4
  Background counts = 122.3
  Rate = 0.002 +/- 0.0004

[Mon Jan 23 01:20:39 2012] Off-axis axis estimate = 2.01'
[Mon Jan 23 12:14:50 2012] Using EEF radius (= 7.43 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 12:14:50 2012] Initial guess for spatial extent in simple fitting = 7.43"
[Mon Jan 23 12:14:50 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.820
[Mon Jan 23 12:14:50 2012] Giving source the simple spatial ID 97 for pass 0, mean size = 7.43"
[Mon Jan 23 17:32:18 2012] fullrun_mos2_xmm0109270101_pi300-10000_cl_pass0_src97.ximg exists
[Mon Jan 23 17:32:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109270101_pi300-10000_cl_pass0_src97.csv
[Mon Jan 23 17:32:18 2012] fullrun_mos2_xmm0109270101_pi300-10000_cl_pass0_src97_1.ximg exists
[Mon Jan 23 17:32:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109270101_pi300-10000_cl_pass0_src97.csv
[Mon Jan 23 17:32:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109270101_pi300-10000_cl_pass0_src97_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109270101_pi300-10000_cl_pass0_src97.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 17:32:19 2012] fullrun_mos2_xmm0109270101_pi300-10000_cl_pass0_tfrozen_src97.ximg exists
[Mon Jan 23 17:32:19 2012] fullrun_mos2_xmm0109270101_pi300-10000_cl_pass0_tfrozen_src97_1.ximg exists
[Mon Jan 23 17:32:19 2012] Fit fullrun_mos2_xmm0109270101_pi300-10000_cl_pass0_tfrozen_src97 appears to have run properly
[Mon Jan 23 17:33:21 2012] Spatial fit model total counts = 1687.260000, observed total counts = 1684.000000
[Mon Jan 23 17:33:21 2012] Offset between fit and detection position for source 85 = 6.208302 pixels
[Mon Jan 23 17:33:21 2012] 1552.969000 total counts/ 1377.720000 bgd. counts: snr = 4.721446
Spatial fit parameters:
  Offset between fit and detection position for source 85 = 6.208302 pixels
  Position = (278.8, 324.1) = 0 42 43.88 41 18 46.2
  Extent = 13.9 (12.1-14.9)", rotation angle = 0
  Source counts = 175.2 +/- 39.4
  Background counts = 1377.7
  Rate = 0.003 +/- 0.0007
[Mon Jan 23 17:33:21 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 17:33:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 17:33:21 2012] Assessing source extent using major axis lower bound
[Mon Jan 23 17:33:21 2012] Source does appear to be extended
[Mon Jan 23 17:33:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 24 05:38:40 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jan 24 05:38:40 2012] Initial guess for spatial extent in simple fitting = 13.93"
[Tue Jan 24 05:38:40 2012] source mask rpix=3.2, npix_max = 54, mask sum = 61, frac = 1.113
[Tue Jan 24 05:38:40 2012] Giving source the simple spatial ID 89 for pass 1, mean size = 13.93"
[Tue Jan 24 09:41:30 2012] fullrun_mos2_xmm0109270101_pi300-10000_cl_pass1_src89.ximg exists
[Tue Jan 24 09:41:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109270101_pi300-10000_cl_pass1_src89.csv
[Tue Jan 24 09:41:30 2012] fullrun_mos2_xmm0109270101_pi300-10000_cl_pass1_src89_1.ximg exists
[Tue Jan 24 09:41:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109270101_pi300-10000_cl_pass1_src89.csv
[Tue Jan 24 09:41:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109270101_pi300-10000_cl_pass1_src89_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109270101_pi300-10000_cl_pass1_src89.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 24 09:41:31 2012] fullrun_mos2_xmm0109270101_pi300-10000_cl_pass1_tfrozen_src89.ximg exists
[Tue Jan 24 09:41:31 2012] fullrun_mos2_xmm0109270101_pi300-10000_cl_pass1_tfrozen_src89_1.ximg exists
[Tue Jan 24 09:41:31 2012] Fit fullrun_mos2_xmm0109270101_pi300-10000_cl_pass1_tfrozen_src89 appears to have run properly
[Tue Jan 24 09:42:28 2012] Warning: source 89 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 85 at 12.698940 pixels away
[Tue Jan 24 09:42:28 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 09:42:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 09:42:28 2012] Assessing source extent using major axis lower bound
[Tue Jan 24 09:42:28 2012] Source does appear to be extended
[Tue Jan 24 09:42:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan 26 04:06:51 2012] XMMSAS src. selection expression = ellipse(24210.398000, 28147.196000, 835.614024, 835.614024, 0.000000, X, Y)
[Thu Jan 26 04:06:51 2012] Writing source region out to fullrun_mos2_xmm0109270101_pi300-10000_pass1_cl_src85_src.reg
[Thu Jan 26 04:06:51 2012] Extracting stamp from image fullrun_mos2_xmm0109270101_pi300-10000_cl_sm2.00.img.gz, (231, 276) - (327, 372)
[Thu Jan 26 04:06:51 2012] XMMSAS bgd. selection expression = annulus(24210.398000, 28147.196000, 1392.690040, 2785.380080, X, Y) && !ellipse(25488.967800, 24846.103000, 2391.876069, 2391.876069, 0.000000, X, Y) && !ellipse(23537.905620, 25323.553600, 513.550415, 513.550415, 0.000000, X, Y) && !ellipse(22323.018340, 28291.547000, 402.354412, 402.354412, 0.000000, X, Y) && !ellipse(27137.252800, 25230.757400, 397.260811, 397.260811, 0.000000, X, Y) && !ellipse(24573.510000, 24546.796000, 3483.504100, 3483.504100, 0.000000, X, Y) && !ellipse(20659.395691, 24888.589203, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24531.758000, 24679.156000, 1089.680031, 1089.680031, 0.000000, X, Y) && !ellipse(24299.400420, 25429.616240, 349.140810, 349.140810, 0.000000, X, Y) && !ellipse(27113.740780, 29180.992200, 395.222411, 395.222411, 0.000000, X, Y) && !ellipse(23971.951540, 26454.552400, 306.027209, 306.027209, 0.000000, X, Y) && !ellipse(26510.259857, 25181.353973, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26219.294940, 29712.430800, 313.316809, 313.316809, 0.000000, X, Y) && !ellipse(23063.097600, 27520.672000, 254.913607, 254.913607, 0.000000, X, Y) && !ellipse(20775.262497, 25690.556732, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25076.288240, 28091.515600, 419.116812, 419.116812, 0.000000, X, Y) && !ellipse(24814.322723, 30905.328979, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25239.166000, 25614.782000, 1047.432030, 1047.432030, 0.000000, X, Y) && !ellipse(23640.372314, 31181.839661, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22203.929779, 26047.320984, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24734.247040, 26733.192047, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23133.158173, 27011.909058, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26721.294861, 24504.520630, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22086.977066, 27187.974670, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jan 26 04:06:51 2012] Writing fullrun_mos2_xmm0109270101_pi300-10000_pass1_cl_src85.gif
[Thu Jan 26 05:14:19 2012] Mean detx,y = (-1043.05, -3308.20) 
[Thu Jan 26 05:14:20 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jan 26 05:14:32 2012] Binned source spectrum to 10 counts/bin
[Thu Jan 26 05:14:32 2012] Setting source spectrum file to fullrun_mos2_xmm0109270101_pi300-10000_pass1_cl_src85_src_b10.pi.gz
[Thu Jan 26 05:14:32 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0109270101_pi300-10000_pass1_cl_src85_bgd.pi.gz
[Thu Jan 26 08:24:54 2012] Updating aperture counts using extracted products
[Thu Jan 26 08:24:54 2012] Error reading totcts from fullrun_mos2_xmm0109270101_pi300-10000_pass1_cl_src85_src_b10.pi.gz
[Thu Jan 26 08:24:56 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jan 26 08:24:56 2012] Using photon index=1.80, rate=0.00332, arf fullrun_mos2_xmm0109270101_pi300-10000_pass1_cl_src85.arf
[Thu Jan 26 08:24:56 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jan 26 08:24:56 2012] Updating source flux to 3.2e-14