[Mon Jan 23 01:20:37 2012] Detection parameters:
  Position = (250.9, 286.2) = 0 42 54.66 41 16 2.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 5355.5 +/- 89.4
  Background counts = 134.5
  Rate = 0.1 +/- 0.002

[Mon Jan 23 01:20:39 2012] Off-axis axis estimate = 3.56'
[Mon Jan 23 12:14:50 2012] Using EEF radius (= 8.21 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 12:14:50 2012] Initial guess for spatial extent in simple fitting = 8.21"
[Mon Jan 23 12:14:50 2012] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.097
[Mon Jan 23 12:14:50 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 8.21"
[Mon Jan 23 17:32:16 2012] fullrun_mos2_xmm0109270101_pi300-10000_cl_pass0_src7.ximg exists
[Mon Jan 23 17:32:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109270101_pi300-10000_cl_pass0_src7.csv
[Mon Jan 23 17:32:16 2012] fullrun_mos2_xmm0109270101_pi300-10000_cl_pass0_src7_1.ximg exists
[Mon Jan 23 17:32:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109270101_pi300-10000_cl_pass0_src7.csv
[Mon Jan 23 17:32:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109270101_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109270101_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 17:32:18 2012] fullrun_mos2_xmm0109270101_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Mon Jan 23 17:32:18 2012] fullrun_mos2_xmm0109270101_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Mon Jan 23 17:32:18 2012] Fit fullrun_mos2_xmm0109270101_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Mon Jan 23 17:33:21 2012] Spatial fit model total counts = 9134.630000, observed total counts = 9122.000000
[Mon Jan 23 17:33:21 2012] Offset between fit and detection position for source 8 = 0.206010 pixels
[Mon Jan 23 17:33:21 2012] 9003.640000 total counts/ 6057.510000 bgd. counts: snr = 37.853395
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.206010 pixels
  Position = (250.8, 286.4) = 0 42 54.70 41 16 2.2
  Extent = 4.4 (4.3-4.5)", rotation angle = 0
  Source counts = 2946.1 +/- 94.9
  Background counts = 6057.5
  Rate = 0.06 +/- 0.002
[Mon Jan 23 17:33:21 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 17:33:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 17:33:21 2012] Assessing source extent using major axis lower bound
[Mon Jan 23 17:33:21 2012] Source does appear to be extended
[Mon Jan 23 17:33:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 24 05:38:40 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jan 24 05:38:40 2012] Initial guess for spatial extent in simple fitting = 4.42"
[Tue Jan 24 05:38:40 2012] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.978
[Tue Jan 24 05:38:40 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 4.42"
[Tue Jan 24 09:41:29 2012] fullrun_mos2_xmm0109270101_pi300-10000_cl_pass1_src7.ximg exists
[Tue Jan 24 09:41:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109270101_pi300-10000_cl_pass1_src7.csv
[Tue Jan 24 09:41:29 2012] fullrun_mos2_xmm0109270101_pi300-10000_cl_pass1_src7_1.ximg exists
[Tue Jan 24 09:41:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109270101_pi300-10000_cl_pass1_src7.csv
[Tue Jan 24 09:41:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109270101_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109270101_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 24 09:41:30 2012] fullrun_mos2_xmm0109270101_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Tue Jan 24 09:41:30 2012] fullrun_mos2_xmm0109270101_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Tue Jan 24 09:41:30 2012] Fit fullrun_mos2_xmm0109270101_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Tue Jan 24 09:42:28 2012] Spatial fit model total counts = 8630.030000, observed total counts = 8584.000000
[Tue Jan 24 09:42:28 2012] Offset between fit and detection position for source 8 = 0.017886 pixels
[Tue Jan 24 09:42:28 2012] 8481.830000 total counts/ 5541.010000 bgd. counts: snr = 39.506993
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.017886 pixels
  Position = (250.8, 286.4) = 0 42 54.69 41 16 2.1
  Extent = 4.4 (4.3-4.5)", rotation angle = 0
  Source counts = 2940.8 +/- 92.1
  Background counts = 5541.0
  Rate = 0.06 +/- 0.002
[Tue Jan 24 09:42:28 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 09:42:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 09:42:28 2012] Assessing source extent using major axis lower bound
[Tue Jan 24 09:42:28 2012] Source does appear to be extended
[Tue Jan 24 09:42:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan 26 04:06:47 2012] Counts = 2940.820000, rescaling region sizes by 2.000000
[Thu Jan 26 04:06:47 2012] XMMSAS src. selection expression = ellipse(21770.362400, 24867.466600, 528.405615, 528.405615, 0.000000, X, Y)
[Thu Jan 26 04:06:47 2012] Writing source region out to fullrun_mos2_xmm0109270101_pi300-10000_pass1_cl_src8_src.reg
[Thu Jan 26 04:06:47 2012] Extracting stamp from image fullrun_mos2_xmm0109270101_pi300-10000_cl_sm2.00.img.gz, (220, 256) - (281, 317)
[Thu Jan 26 04:06:48 2012] XMMSAS bgd. selection expression = annulus(21770.362400, 24867.466600, 1761.352051, 3522.704101, X, Y) && !ellipse(25488.967800, 24846.103000, 2391.876069, 2391.876069, 0.000000, X, Y) && !ellipse(23537.905620, 25323.553600, 513.550415, 513.550415, 0.000000, X, Y) && !ellipse(23271.114480, 24106.991000, 709.465620, 416.044812, 302.484200, X, Y) && !ellipse(22323.018340, 28291.547000, 402.354412, 402.354412, 0.000000, X, Y) && !ellipse(18230.600113, 23440.937134, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24573.510000, 24546.796000, 3483.504100, 3483.504100, 0.000000, X, Y) && !ellipse(22325.823520, 24404.755800, 311.288809, 311.288809, 0.000000, X, Y) && !ellipse(20659.395691, 24888.589203, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19765.480828, 27300.092297, 409.533607, 382.831639, 7.529094, X, Y) && !ellipse(24531.758000, 24679.156000, 1089.680031, 1089.680031, 0.000000, X, Y) && !ellipse(24299.400420, 25429.616240, 349.140810, 349.140810, 0.000000, X, Y) && !ellipse(19958.573060, 24075.136200, 443.950413, 324.032009, 43.033300, X, Y) && !ellipse(23971.951540, 26454.552400, 306.027209, 306.027209, 0.000000, X, Y) && !ellipse(24622.764400, 23296.156800, 292.101608, 292.101608, 0.000000, X, Y) && !ellipse(21018.520540, 24180.624000, 268.024808, 268.024808, 0.000000, X, Y) && !ellipse(23063.097600, 27520.672000, 254.913607, 254.913607, 0.000000, X, Y) && !ellipse(19657.562866, 24830.579468, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20775.262497, 25690.556732, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23985.031000, 22546.821400, 299.469609, 299.469609, 0.000000, X, Y) && !ellipse(18659.132462, 20993.884247, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24386.322080, 21600.502200, 251.134407, 251.134407, 0.000000, X, Y) && !ellipse(25076.288240, 28091.515600, 419.116812, 419.116812, 0.000000, X, Y) && !ellipse(24607.670000, 21628.774200, 1315.424038, 427.369612, -0.000000, X, Y) && !ellipse(25239.166000, 25614.782000, 1047.432030, 1047.432030, 0.000000, X, Y) && !ellipse(17657.708511, 27461.511719, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22488.079620, 21264.087780, 320.220809, 320.220809, 0.000000, X, Y) && !ellipse(25833.997345, 23374.885315, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22203.929779, 26047.320984, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24734.247040, 26733.192047, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23133.158173, 27011.909058, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24210.398000, 28147.196000, 1114.152032, 1114.152032, 0.000000, X, Y) && !ellipse(18738.272247, 27597.905884, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19138.786072, 28682.217194, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22102.145248, 23443.146118, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22086.977066, 27187.974670, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jan 26 04:06:48 2012] Writing fullrun_mos2_xmm0109270101_pi300-10000_pass1_cl_src8.gif
[Thu Jan 26 04:19:14 2012] Mean detx,y = (-2542.40, 414.53) 
[Thu Jan 26 04:19:16 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jan 26 04:19:29 2012] Binned source spectrum to 10 counts/bin
[Thu Jan 26 04:19:29 2012] Setting source spectrum file to fullrun_mos2_xmm0109270101_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Thu Jan 26 04:19:29 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0109270101_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Thu Jan 26 08:24:52 2012] Updating aperture counts using extracted products
[Thu Jan 26 08:24:52 2012] Error reading totcts from fullrun_mos2_xmm0109270101_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Thu Jan 26 08:24:54 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jan 26 08:24:54 2012] Using photon index=1.80, rate=0.0557, arf fullrun_mos2_xmm0109270101_pi300-10000_pass1_cl_src8.arf
[Thu Jan 26 08:24:54 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jan 26 08:24:55 2012] Updating source flux to 5.8e-13