[Mon Jan 23 01:20:37 2012] Detection parameters:
  Position = (278.2, 287.8) = 0 42 44.12 41 16 8.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 4329.0 +/- 83.9
  Background counts = 150.8
  Rate = 0.09 +/- 0.002

[Mon Jan 23 01:20:39 2012] Off-axis axis estimate = 1.66'
[Mon Jan 23 12:14:50 2012] Using EEF radius (= 7.26 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 12:14:50 2012] Initial guess for spatial extent in simple fitting = 7.26"
[Mon Jan 23 12:14:50 2012] source mask rpix=1.7, npix_max = 18, mask sum = 11, frac = 0.585
[Mon Jan 23 12:14:50 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 7.26"
[Mon Jan 23 17:32:16 2012] fullrun_mos2_xmm0109270101_pi300-10000_cl_pass0_src11.ximg exists
[Mon Jan 23 17:32:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109270101_pi300-10000_cl_pass0_src11.csv
[Mon Jan 23 17:32:16 2012] fullrun_mos2_xmm0109270101_pi300-10000_cl_pass0_src11_1.ximg exists
[Mon Jan 23 17:32:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109270101_pi300-10000_cl_pass0_src11.csv
[Mon Jan 23 17:32:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109270101_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109270101_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 17:32:18 2012] fullrun_mos2_xmm0109270101_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Mon Jan 23 17:32:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109270101_pi300-10000_cl_pass0_tfrozen_src11.csv
[Mon Jan 23 17:32:18 2012] fullrun_mos2_xmm0109270101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Mon Jan 23 17:32:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109270101_pi300-10000_cl_pass0_tfrozen_src11.csv
[Mon Jan 23 17:32:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109270101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109270101_pi300-10000_cl_pass0_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 17:33:21 2012] Warning, spatial fit 11 centroid is now closest to src. 23
[Mon Jan 23 17:33:21 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 17:33:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 17:33:21 2012] Assessing source extent using major
[Mon Jan 23 17:33:21 2012] Source does appear to be extended
[Mon Jan 23 17:33:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan 23 17:33:21 2012] Source is confused with source 27
[Mon Jan 23 17:33:21 2012] Source is confused with source 23
[Tue Jan 24 05:38:40 2012] Using EEF radius (= 7.26 ")to estimate initial spatial extent for simple fitting
[Tue Jan 24 05:38:40 2012] Initial guess for spatial extent in simple fitting = 7.26"
[Tue Jan 24 05:38:40 2012] source mask rpix=1.7, npix_max = 18, mask sum = 11, frac = 0.585
[Tue Jan 24 05:38:40 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 7.26"
[Tue Jan 24 09:41:29 2012] fullrun_mos2_xmm0109270101_pi300-10000_cl_pass1_src11.ximg exists
[Tue Jan 24 09:41:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109270101_pi300-10000_cl_pass1_src11.csv
[Tue Jan 24 09:41:29 2012] fullrun_mos2_xmm0109270101_pi300-10000_cl_pass1_src11_1.ximg exists
[Tue Jan 24 09:41:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109270101_pi300-10000_cl_pass1_src11.csv
[Tue Jan 24 09:41:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109270101_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109270101_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 24 09:41:30 2012] fullrun_mos2_xmm0109270101_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Tue Jan 24 09:41:30 2012] fullrun_mos2_xmm0109270101_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Tue Jan 24 09:41:30 2012] Fit fullrun_mos2_xmm0109270101_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Tue Jan 24 09:42:28 2012] Spatial fit model total counts = 21375.300000, observed total counts = 20798.000000
[Tue Jan 24 09:42:28 2012] Offset between fit and detection position for source 7 = 7.007423 pixels
[Tue Jan 24 09:42:28 2012] 17465.820000 total counts/ 7211.620000 bgd. counts: snr = 120.749507
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 7.007423 pixels
  Position = (283.0, 282.7) = 0 42 42.26 41 15 46.2
  Extent = 14.5 (14.5-29.0)", rotation angle = 0
  Source counts = 10254.2 +/- 132.2
  Background counts = 7211.6
  Rate = 0.2 +/- 0.003
[Tue Jan 24 09:42:28 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 09:42:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 09:42:28 2012] Assessing source extent using major axis lower bound
[Tue Jan 24 09:42:28 2012] Source does appear to be extended
[Tue Jan 24 09:42:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan 26 04:06:48 2012] Counts = 10254.200000, rescaling region sizes by 3.000000
[Thu Jan 26 04:06:48 2012] XMMSAS src. selection expression = ellipse(24573.510000, 24546.796000, 2612.628075, 2612.628075, 0.000000, X, Y)
[Thu Jan 26 04:06:48 2012] Writing source region out to fullrun_mos2_xmm0109270101_pi300-10000_pass1_cl_src7_src.reg
[Thu Jan 26 04:06:48 2012] Extracting stamp from image fullrun_mos2_xmm0109270101_pi300-10000_cl_sm2.00.img.gz, (133, 133) - (433, 433)
[Thu Jan 26 04:06:48 2012] XMMSAS bgd. selection expression = annulus(24573.510000, 24546.796000, 13063.140376, 26126.280752, X, Y) && !ellipse(25488.967800, 24846.103000, 2391.876069, 2391.876069, 0.000000, X, Y) && !ellipse(23537.905620, 25323.553600, 513.550415, 513.550415, 0.000000, X, Y) && !ellipse(28987.038800, 24302.972000, 385.732011, 385.732011, 0.000000, X, Y) && !ellipse(23271.114480, 24106.991000, 709.465620, 416.044812, 302.484200, X, Y) && !ellipse(22323.018340, 28291.547000, 402.354412, 402.354412, 0.000000, X, Y) && !ellipse(18230.600113, 23440.937134, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21770.362400, 24867.466600, 352.270410, 352.270410, 0.000000, X, Y) && !ellipse(31212.170715, 27943.319885, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27781.066720, 20459.320600, 402.496012, 402.496012, 0.000000, X, Y) && !ellipse(27137.252800, 25230.757400, 397.260811, 397.260811, 0.000000, X, Y) && !ellipse(22325.823520, 24404.755800, 311.288809, 311.288809, 0.000000, X, Y) && !ellipse(23239.756000, 36039.623400, 494.571527, 494.571527, 0.000000, X, Y) && !ellipse(29958.690225, 22425.933377, 395.144331, 342.688853, 126.428450, X, Y) && !ellipse(20659.395691, 24888.589203, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19765.480828, 27300.092297, 409.533607, 382.831639, 7.529094, X, Y) && !ellipse(26904.647200, 21467.676400, 506.774415, 382.741611, 334.287760, X, Y) && !ellipse(20712.211000, 28783.678800, 380.374411, 380.374411, 0.000000, X, Y) && !ellipse(30760.909580, 20715.312600, 469.759214, 469.759214, 0.000000, X, Y) && !ellipse(17374.825000, 14430.055600, 724.164821, 288.652808, 212.381000, X, Y) && !ellipse(24531.758000, 24679.156000, 1089.680031, 1089.680031, 0.000000, X, Y) && !ellipse(24299.400420, 25429.616240, 349.140810, 349.140810, 0.000000, X, Y) && !ellipse(32415.512000, 27516.484000, 425.207212, 425.207212, 0.000000, X, Y) && !ellipse(21081.318344, 19042.237259, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12202.948166, 23286.398499, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19958.573060, 24075.136200, 443.950413, 324.032009, 43.033300, X, Y) && !ellipse(24053.481180, 19557.593600, 334.278410, 334.278410, 0.000000, X, Y) && !ellipse(27808.864820, 17601.411200, 469.437614, 347.117610, 346.854837, X, Y) && !ellipse(29107.099240, 21873.084800, 349.989610, 349.989610, 0.000000, X, Y) && !ellipse(29318.269287, 24813.693481, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27113.740780, 29180.992200, 395.222411, 395.222411, 0.000000, X, Y) && !ellipse(8516.461227, 25952.913452, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23971.951540, 26454.552400, 306.027209, 306.027209, 0.000000, X, Y) && !ellipse(14032.981680, 14977.065000, 497.673614, 497.673614, 0.000000, X, Y) && !ellipse(32877.107727, 21805.598389, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28300.540802, 28681.683533, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13295.544495, 18413.170547, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24622.764400, 23296.156800, 292.101608, 292.101608, 0.000000, X, Y) && !ellipse(28284.244232, 36659.401398, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12861.298523, 21695.389450, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29985.614140, 20481.085000, 323.876009, 323.876009, 0.000000, X, Y) && !ellipse(21710.171326, 36744.603943, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26510.259857, 25181.353973, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32069.965820, 30556.509400, 397.986411, 397.986411, 0.000000, X, Y) && !ellipse(21018.520540, 24180.624000, 268.024808, 268.024808, 0.000000, X, Y) && !ellipse(14335.333618, 27805.717682, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24149.113098, 19912.562500, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26219.294940, 29712.430800, 313.316809, 313.316809, 0.000000, X, Y) && !ellipse(17003.221700, 28020.901000, 393.392011, 393.392011, 0.000000, X, Y) && !ellipse(29296.038727, 22755.732483, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23063.097600, 27520.672000, 254.913607, 254.913607, 0.000000, X, Y) && !ellipse(30613.420600, 26415.928400, 361.748810, 361.748810, 0.000000, X, Y) && !ellipse(27667.945557, 11183.768707, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19657.562866, 24830.579468, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19914.906400, 17899.740200, 454.298413, 454.298413, 0.000000, X, Y) && !ellipse(20775.262497, 25690.556732, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23985.031000, 22546.821400, 299.469609, 299.469609, 0.000000, X, Y) && !ellipse(18659.132462, 20993.884247, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31534.148773, 18594.205048, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24386.322080, 21600.502200, 251.134407, 251.134407, 0.000000, X, Y) && !ellipse(25076.288240, 28091.515600, 419.116812, 419.116812, 0.000000, X, Y) && !ellipse(30642.379800, 30264.203400, 339.359484, 339.359484, 0.000000, X, Y) && !ellipse(24607.670000, 21628.774200, 1315.424038, 427.369612, -0.000000, X, Y) && !ellipse(28499.559143, 22029.028397, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32385.478607, 11100.970291, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15882.638229, 27021.307861, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31878.147644, 23811.887207, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24814.322723, 30905.328979, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37830.123291, 31192.186310, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25239.166000, 25614.782000, 1047.432030, 1047.432030, 0.000000, X, Y) && !ellipse(25905.320800, 22195.844600, 338.904010, 338.904010, 0.000000, X, Y) && !ellipse(36072.196533, 23190.050140, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17657.708511, 27461.511719, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18972.164398, 29974.281891, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23500.558472, 19932.455307, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29613.251007, 37610.878937, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19969.649612, 30426.674988, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30032.854492, 40912.166260, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26520.442000, 31782.170000, 617.652018, 617.652018, 0.000000, X, Y) && !ellipse(22488.079620, 21264.087780, 320.220809, 320.220809, 0.000000, X, Y) && !ellipse(38255.738600, 28736.436820, 737.989621, 277.552008, 74.563000, X, Y) && !ellipse(23640.372314, 31181.839661, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25833.997345, 23374.885315, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22203.929779, 26047.320984, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27545.673492, 40464.894714, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24734.247040, 26733.192047, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26694.736603, 9767.231590, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23133.158173, 27011.909058, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24210.398000, 28147.196000, 1114.152032, 1114.152032, 0.000000, X, Y) && !ellipse(40499.179108, 26944.054474, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18738.272247, 27597.905884, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(9174.105347, 31176.078247, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19138.786072, 28682.217194, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26721.294861, 24504.520630, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22102.145248, 23443.146118, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22086.977066, 27187.974670, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20704.585600, 41328.820200, 735.862489, 735.862489, 0.000000, X, Y) && !ellipse(28958.149078, 14757.969147, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36384.178406, 21977.016373, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25611.110291, 12133.537735, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jan 26 04:06:48 2012] Writing fullrun_mos2_xmm0109270101_pi300-10000_pass1_cl_src7.gif
[Thu Jan 26 04:22:02 2012] Mean detx,y = (108.25, -197.10) 
[Thu Jan 26 04:22:04 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jan 26 04:30:35 2012] Binned source spectrum to 10 counts/bin
[Thu Jan 26 04:30:35 2012] Setting source spectrum file to fullrun_mos2_xmm0109270101_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Thu Jan 26 04:30:35 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0109270101_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Thu Jan 26 08:24:52 2012] Updating aperture counts using extracted products
[Thu Jan 26 08:24:52 2012] Error reading totcts from fullrun_mos2_xmm0109270101_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Thu Jan 26 08:24:55 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jan 26 08:24:55 2012] Using photon index=1.80, rate=0.194, arf fullrun_mos2_xmm0109270101_pi300-10000_pass1_cl_src7.arf
[Thu Jan 26 08:24:55 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jan 26 08:24:55 2012] Updating source flux to 1.6e-12
[Thu Jan 26 08:34:08 2012] Flag c found in src. 7 procflags, skipping spectral fitting