[Mon Jan 23 01:20:37 2012] Detection parameters:
  Position = (359.3, 321.7) = 0 42 12.80 41 18 34.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3973.0 +/- 76.6
  Background counts = 66.7
  Rate = 0.1 +/- 0.002

[Mon Jan 23 01:20:39 2012] Off-axis axis estimate = 4.73'
[Mon Jan 23 12:14:50 2012] Using EEF radius (= 8.79 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 12:14:50 2012] Initial guess for spatial extent in simple fitting = 8.79"
[Mon Jan 23 12:14:50 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.983
[Mon Jan 23 12:14:50 2012] Giving source the simple spatial ID 8 for pass 0, mean size = 8.79"
[Mon Jan 23 17:32:16 2012] fullrun_mos2_xmm0109270101_pi300-10000_cl_pass0_src8.ximg exists
[Mon Jan 23 17:32:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109270101_pi300-10000_cl_pass0_src8.csv
[Mon Jan 23 17:32:16 2012] fullrun_mos2_xmm0109270101_pi300-10000_cl_pass0_src8_1.ximg exists
[Mon Jan 23 17:32:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109270101_pi300-10000_cl_pass0_src8.csv
[Mon Jan 23 17:32:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109270101_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109270101_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 17:32:18 2012] fullrun_mos2_xmm0109270101_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Mon Jan 23 17:32:18 2012] fullrun_mos2_xmm0109270101_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Mon Jan 23 17:32:18 2012] Fit fullrun_mos2_xmm0109270101_pi300-10000_cl_pass0_tfrozen_src8 appears to have run properly
[Mon Jan 23 17:33:21 2012] Warning: source 8 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 11.838245 pixels away
[Mon Jan 23 17:33:21 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 17:33:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 17:33:21 2012] Assessing source extent using major
[Mon Jan 23 17:33:21 2012] Source does appear to be extended
[Mon Jan 23 17:33:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 24 05:38:40 2012] Using EEF radius (= 8.79 ")to estimate initial spatial extent for simple fitting
[Tue Jan 24 05:38:40 2012] Initial guess for spatial extent in simple fitting = 8.79"
[Tue Jan 24 05:38:40 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.983
[Tue Jan 24 05:38:40 2012] Giving source the simple spatial ID 8 for pass 1, mean size = 8.79"
[Tue Jan 24 09:41:29 2012] fullrun_mos2_xmm0109270101_pi300-10000_cl_pass1_src8.ximg exists
[Tue Jan 24 09:41:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109270101_pi300-10000_cl_pass1_src8.csv
[Tue Jan 24 09:41:29 2012] fullrun_mos2_xmm0109270101_pi300-10000_cl_pass1_src8_1.ximg exists
[Tue Jan 24 09:41:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109270101_pi300-10000_cl_pass1_src8.csv
[Tue Jan 24 09:41:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109270101_pi300-10000_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109270101_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 24 09:41:30 2012] fullrun_mos2_xmm0109270101_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Tue Jan 24 09:41:30 2012] fullrun_mos2_xmm0109270101_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Tue Jan 24 09:41:30 2012] Fit fullrun_mos2_xmm0109270101_pi300-10000_cl_pass1_tfrozen_src8 appears to have run properly
[Tue Jan 24 09:42:28 2012] Warning, spatial fit 8 centroid is now closest to src. 21
[Tue Jan 24 09:42:28 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 09:42:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 09:42:28 2012] Assessing source extent using major
[Tue Jan 24 09:42:28 2012] Source does appear to be extended
[Tue Jan 24 09:42:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan 26 04:06:48 2012] Counts = 3973.039062, rescaling region sizes by 2.000000
[Thu Jan 26 04:06:48 2012] XMMSAS src. selection expression = ellipse(31212.170715, 27943.319885, 1305.000000, 1305.000000, 0.000000, X, Y)
[Thu Jan 26 04:06:48 2012] Writing source region out to fullrun_mos2_xmm0109270101_pi300-10000_pass1_cl_src5_src.reg
[Thu Jan 26 04:06:48 2012] Extracting stamp from image fullrun_mos2_xmm0109270101_pi300-10000_cl_sm2.00.img.gz, (284, 247) - (434, 397)
[Thu Jan 26 04:06:48 2012] XMMSAS bgd. selection expression = annulus(31212.170715, 27943.319885, 4350.000000, 8700.000000, X, Y) && !ellipse(25488.967800, 24846.103000, 2391.876069, 2391.876069, 0.000000, X, Y) && !ellipse(23537.905620, 25323.553600, 513.550415, 513.550415, 0.000000, X, Y) && !ellipse(28987.038800, 24302.972000, 385.732011, 385.732011, 0.000000, X, Y) && !ellipse(23271.114480, 24106.991000, 709.465620, 416.044812, 302.484200, X, Y) && !ellipse(22323.018340, 28291.547000, 402.354412, 402.354412, 0.000000, X, Y) && !ellipse(27781.066720, 20459.320600, 402.496012, 402.496012, 0.000000, X, Y) && !ellipse(27137.252800, 25230.757400, 397.260811, 397.260811, 0.000000, X, Y) && !ellipse(24573.510000, 24546.796000, 3483.504100, 3483.504100, 0.000000, X, Y) && !ellipse(22325.823520, 24404.755800, 311.288809, 311.288809, 0.000000, X, Y) && !ellipse(23239.756000, 36039.623400, 494.571527, 494.571527, 0.000000, X, Y) && !ellipse(29958.690225, 22425.933377, 395.144331, 342.688853, 126.428450, X, Y) && !ellipse(26904.647200, 21467.676400, 506.774415, 382.741611, 334.287760, X, Y) && !ellipse(30760.909580, 20715.312600, 469.759214, 469.759214, 0.000000, X, Y) && !ellipse(24531.758000, 24679.156000, 1089.680031, 1089.680031, 0.000000, X, Y) && !ellipse(24299.400420, 25429.616240, 349.140810, 349.140810, 0.000000, X, Y) && !ellipse(32415.512000, 27516.484000, 425.207212, 425.207212, 0.000000, X, Y) && !ellipse(24053.481180, 19557.593600, 334.278410, 334.278410, 0.000000, X, Y) && !ellipse(29107.099240, 21873.084800, 349.989610, 349.989610, 0.000000, X, Y) && !ellipse(29318.269287, 24813.693481, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27113.740780, 29180.992200, 395.222411, 395.222411, 0.000000, X, Y) && !ellipse(23971.951540, 26454.552400, 306.027209, 306.027209, 0.000000, X, Y) && !ellipse(32877.107727, 21805.598389, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28300.540802, 28681.683533, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24622.764400, 23296.156800, 292.101608, 292.101608, 0.000000, X, Y) && !ellipse(28284.244232, 36659.401398, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29985.614140, 20481.085000, 323.876009, 323.876009, 0.000000, X, Y) && !ellipse(21710.171326, 36744.603943, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26510.259857, 25181.353973, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32069.965820, 30556.509400, 397.986411, 397.986411, 0.000000, X, Y) && !ellipse(24149.113098, 19912.562500, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26219.294940, 29712.430800, 313.316809, 313.316809, 0.000000, X, Y) && !ellipse(29296.038727, 22755.732483, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23063.097600, 27520.672000, 254.913607, 254.913607, 0.000000, X, Y) && !ellipse(30613.420600, 26415.928400, 361.748810, 361.748810, 0.000000, X, Y) && !ellipse(23985.031000, 22546.821400, 299.469609, 299.469609, 0.000000, X, Y) && !ellipse(31534.148773, 18594.205048, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24386.322080, 21600.502200, 251.134407, 251.134407, 0.000000, X, Y) && !ellipse(25076.288240, 28091.515600, 419.116812, 419.116812, 0.000000, X, Y) && !ellipse(30642.379800, 30264.203400, 339.359484, 339.359484, 0.000000, X, Y) && !ellipse(24607.670000, 21628.774200, 1315.424038, 427.369612, -0.000000, X, Y) && !ellipse(28499.559143, 22029.028397, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31878.147644, 23811.887207, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24814.322723, 30905.328979, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37830.123291, 31192.186310, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25239.166000, 25614.782000, 1047.432030, 1047.432030, 0.000000, X, Y) && !ellipse(25905.320800, 22195.844600, 338.904010, 338.904010, 0.000000, X, Y) && !ellipse(36072.196533, 23190.050140, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23500.558472, 19932.455307, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26520.442000, 31782.170000, 617.652018, 617.652018, 0.000000, X, Y) && !ellipse(22488.079620, 21264.087780, 320.220809, 320.220809, 0.000000, X, Y) && !ellipse(38255.738600, 28736.436820, 737.989621, 277.552008, 74.563000, X, Y) && !ellipse(23640.372314, 31181.839661, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25833.997345, 23374.885315, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22203.929779, 26047.320984, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24734.247040, 26733.192047, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23133.158173, 27011.909058, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24210.398000, 28147.196000, 1114.152032, 1114.152032, 0.000000, X, Y) && !ellipse(40499.179108, 26944.054474, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26721.294861, 24504.520630, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22102.145248, 23443.146118, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22086.977066, 27187.974670, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36384.178406, 21977.016373, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jan 26 04:06:48 2012] Writing fullrun_mos2_xmm0109270101_pi300-10000_pass1_cl_src5.gif
[Thu Jan 26 04:19:38 2012] Mean detx,y = (5951.93, -4822.24) 
[Thu Jan 26 04:19:39 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jan 26 04:20:56 2012] Binned source spectrum to 10 counts/bin
[Thu Jan 26 04:20:56 2012] Setting source spectrum file to fullrun_mos2_xmm0109270101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Thu Jan 26 04:20:56 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0109270101_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Thu Jan 26 05:46:22 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jan 26 05:46:22 2012] rmf not generated due to insufficient counts
[Thu Jan 26 08:24:52 2012] Updating aperture counts using extracted products
[Thu Jan 26 08:24:52 2012] Error reading totcts from fullrun_mos2_xmm0109270101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Thu Jan 26 08:24:55 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jan 26 08:24:55 2012] Using photon index=1.80, rate=0.1, arf fullrun_mos2_xmm0109270101_pi300-10000_pass1_cl_src5.arf
[Thu Jan 26 08:24:55 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jan 26 08:24:55 2012] Updating source flux to 1.3e-12
[Thu Jan 26 08:34:08 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting