[Mon Jan 23 01:20:37 2012] Detection parameters:
  Position = (333.8, 279.9) = 0 42 22.66 41 15 33.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 11013.5 +/- 127.8
  Background counts = 99.4
  Rate = 0.2 +/- 0.003

[Mon Jan 23 01:20:39 2012] Off-axis axis estimate = 2.89'
[Mon Jan 23 12:14:50 2012] Using EEF radius (= 7.88 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 12:14:50 2012] Initial guess for spatial extent in simple fitting = 7.88"
[Mon Jan 23 12:14:50 2012] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.749
[Mon Jan 23 12:14:50 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 7.88"
[Mon Jan 23 17:32:16 2012] fullrun_mos2_xmm0109270101_pi300-10000_cl_pass0_src3.ximg exists
[Mon Jan 23 17:32:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109270101_pi300-10000_cl_pass0_src3.csv
[Mon Jan 23 17:32:16 2012] fullrun_mos2_xmm0109270101_pi300-10000_cl_pass0_src3_1.ximg exists
[Mon Jan 23 17:32:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109270101_pi300-10000_cl_pass0_src3.csv
[Mon Jan 23 17:32:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109270101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109270101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 17:32:18 2012] fullrun_mos2_xmm0109270101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Mon Jan 23 17:32:18 2012] fullrun_mos2_xmm0109270101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Mon Jan 23 17:32:18 2012] Fit fullrun_mos2_xmm0109270101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Mon Jan 23 17:33:21 2012] Spatial fit model total counts = 11267.400000, observed total counts = 11264.000000
[Mon Jan 23 17:33:21 2012] Offset between fit and detection position for source 2 = 0.082586 pixels
[Mon Jan 23 17:33:21 2012] 11463.270000 total counts/ 4532.580000 bgd. counts: snr = 102.944639
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.082586 pixels
  Position = (333.7, 279.9) = 0 42 22.69 41 15 33.9
  Extent = 4.8 (4.7-4.9)", rotation angle = 0
  Source counts = 6930.7 +/- 107.1
  Background counts = 4532.6
  Rate = 0.1 +/- 0.002
[Mon Jan 23 17:33:21 2012] Spatial fit model total counts = 8242.040000, observed total counts = 9882.000000
[Mon Jan 23 17:33:21 2012] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jan 23 17:33:21 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 17:33:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 17:33:21 2012] Assessing source extent using major axis lower bound
[Mon Jan 23 17:33:21 2012] Source does appear to be extended
[Mon Jan 23 17:33:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan 23 17:33:21 2012] Source is confused with source 25
[Tue Jan 24 05:38:40 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jan 24 05:38:40 2012] Initial guess for spatial extent in simple fitting = 4.82"
[Tue Jan 24 05:38:40 2012] source mask rpix=1.1, npix_max = 10, mask sum = 12, frac = 1.160
[Tue Jan 24 05:38:40 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 4.82"
[Tue Jan 24 09:41:29 2012] fullrun_mos2_xmm0109270101_pi300-10000_cl_pass1_src3.ximg exists
[Tue Jan 24 09:41:29 2012] fullrun_mos2_xmm0109270101_pi300-10000_cl_pass1_src3_1.ximg exists
[Tue Jan 24 09:41:29 2012] Fit fullrun_mos2_xmm0109270101_pi300-10000_cl_pass1_src3 appears to have run properly
[Tue Jan 24 09:41:30 2012] fullrun_mos2_xmm0109270101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Tue Jan 24 09:41:30 2012] fullrun_mos2_xmm0109270101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Tue Jan 24 09:41:30 2012] Fit fullrun_mos2_xmm0109270101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Tue Jan 24 09:42:28 2012] Spatial fit model total counts = 11272.700000, observed total counts = 11264.000000
[Tue Jan 24 09:42:28 2012] Offset between fit and detection position for source 2 = 0.001177 pixels
[Tue Jan 24 09:42:28 2012] 11469.590000 total counts/ 4535.630000 bgd. counts: snr = 102.958575
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.001177 pixels
  Position = (333.7, 279.9) = 0 42 22.69 41 15 33.9
  Extent = 4.8 (4.7-4.9)", rotation angle = 0
  Source counts = 6934.0 +/- 107.1
  Background counts = 4535.6
  Rate = 0.1 +/- 0.002
[Tue Jan 24 09:42:28 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 09:42:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 09:42:28 2012] Assessing source extent using major axis lower bound
[Tue Jan 24 09:42:28 2012] Source does appear to be extended
[Tue Jan 24 09:42:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan 26 04:06:47 2012] Counts = 6933.960000, rescaling region sizes by 2.000000
[Thu Jan 26 04:06:47 2012] XMMSAS src. selection expression = ellipse(28987.038800, 24302.972000, 578.598017, 578.598017, 0.000000, X, Y)
[Thu Jan 26 04:06:47 2012] Writing source region out to fullrun_mos2_xmm0109270101_pi300-10000_pass1_cl_src2_src.reg
[Thu Jan 26 04:06:47 2012] Extracting stamp from image fullrun_mos2_xmm0109270101_pi300-10000_cl_sm2.00.img.gz, (300, 247) - (367, 313)
[Thu Jan 26 04:06:47 2012] XMMSAS bgd. selection expression = annulus(28987.038800, 24302.972000, 1928.660055, 3857.320111, X, Y) && !ellipse(25488.967800, 24846.103000, 2391.876069, 2391.876069, 0.000000, X, Y) && !ellipse(31212.170715, 27943.319885, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27781.066720, 20459.320600, 402.496012, 402.496012, 0.000000, X, Y) && !ellipse(27137.252800, 25230.757400, 397.260811, 397.260811, 0.000000, X, Y) && !ellipse(24573.510000, 24546.796000, 3483.504100, 3483.504100, 0.000000, X, Y) && !ellipse(29958.690225, 22425.933377, 395.144331, 342.688853, 126.428450, X, Y) && !ellipse(26904.647200, 21467.676400, 506.774415, 382.741611, 334.287760, X, Y) && !ellipse(30760.909580, 20715.312600, 469.759214, 469.759214, 0.000000, X, Y) && !ellipse(24531.758000, 24679.156000, 1089.680031, 1089.680031, 0.000000, X, Y) && !ellipse(32415.512000, 27516.484000, 425.207212, 425.207212, 0.000000, X, Y) && !ellipse(29107.099240, 21873.084800, 349.989610, 349.989610, 0.000000, X, Y) && !ellipse(29318.269287, 24813.693481, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32877.107727, 21805.598389, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28300.540802, 28681.683533, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29985.614140, 20481.085000, 323.876009, 323.876009, 0.000000, X, Y) && !ellipse(26510.259857, 25181.353973, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29296.038727, 22755.732483, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30613.420600, 26415.928400, 361.748810, 361.748810, 0.000000, X, Y) && !ellipse(25076.288240, 28091.515600, 419.116812, 419.116812, 0.000000, X, Y) && !ellipse(24607.670000, 21628.774200, 1315.424038, 427.369612, -0.000000, X, Y) && !ellipse(28499.559143, 22029.028397, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31878.147644, 23811.887207, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25239.166000, 25614.782000, 1047.432030, 1047.432030, 0.000000, X, Y) && !ellipse(25905.320800, 22195.844600, 338.904010, 338.904010, 0.000000, X, Y) && !ellipse(25833.997345, 23374.885315, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24734.247040, 26733.192047, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24210.398000, 28147.196000, 1114.152032, 1114.152032, 0.000000, X, Y) && !ellipse(26721.294861, 24504.520630, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jan 26 04:06:47 2012] Writing fullrun_mos2_xmm0109270101_pi300-10000_pass1_cl_src2.gif
[Thu Jan 26 04:15:23 2012] Mean detx,y = (4565.10, -833.50) 
[Thu Jan 26 04:15:24 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jan 26 04:15:49 2012] Binned source spectrum to 10 counts/bin
[Thu Jan 26 04:15:50 2012] Setting source spectrum file to fullrun_mos2_xmm0109270101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu Jan 26 04:15:50 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0109270101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Thu Jan 26 08:24:52 2012] Updating aperture counts using extracted products
[Thu Jan 26 08:24:52 2012] Error reading totcts from fullrun_mos2_xmm0109270101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu Jan 26 08:24:54 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jan 26 08:24:54 2012] Using photon index=1.80, rate=0.131, arf fullrun_mos2_xmm0109270101_pi300-10000_pass1_cl_src2.arf
[Thu Jan 26 08:24:54 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jan 26 08:24:54 2012] Updating source flux to 1.7e-12
[Thu Jan 26 08:34:08 2012] Flag p found in src. 2 procflags, skipping spectral fitting
[Thu Jan 26 08:34:08 2012] Flag c found in src. 2 procflags, skipping spectral fitting