[Mon Jan 23 01:20:37 2012] Detection parameters:
  Position = (319.9, 235.8) = 0 42 28.04 41 12 21.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 4150.5 +/- 79.0
  Background counts = 90.7
  Rate = 0.1 +/- 0.002

[Mon Jan 23 01:20:39 2012] Off-axis axis estimate = 4.80'
[Mon Jan 23 12:14:50 2012] Using EEF radius (= 8.83 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 12:14:50 2012] Initial guess for spatial extent in simple fitting = 8.83"
[Mon Jan 23 12:14:50 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.977
[Mon Jan 23 12:14:50 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 8.83"
[Mon Jan 23 17:32:16 2012] fullrun_mos2_xmm0109270101_pi300-10000_cl_pass0_src9.ximg exists
[Mon Jan 23 17:32:16 2012] fullrun_mos2_xmm0109270101_pi300-10000_cl_pass0_src9_1.ximg exists
[Mon Jan 23 17:32:16 2012] Fit fullrun_mos2_xmm0109270101_pi300-10000_cl_pass0_src9 appears to have run properly
[Mon Jan 23 17:32:18 2012] fullrun_mos2_xmm0109270101_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Mon Jan 23 17:32:18 2012] fullrun_mos2_xmm0109270101_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Mon Jan 23 17:32:18 2012] Fit fullrun_mos2_xmm0109270101_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Mon Jan 23 17:33:21 2012] Spatial fit model total counts = 4251.970000, observed total counts = 4259.000000
[Mon Jan 23 17:33:21 2012] Offset between fit and detection position for source 12 = 0.084771 pixels
[Mon Jan 23 17:33:21 2012] 4280.240000 total counts/ 1545.660000 bgd. counts: snr = 69.555848
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.084771 pixels
  Position = (319.9, 235.7) = 0 42 28.04 41 12 21.7
  Extent = 5.2" x 4.8", rotation angle = 162
  Source counts = 2734.6 +/- 65.4
  Background counts = 1545.7
  Rate = 0.05 +/- 0.001
[Mon Jan 23 17:33:21 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 17:33:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 17:33:21 2012] Assessing source extent using major
[Mon Jan 23 17:33:21 2012] Source does appear to be extended
[Mon Jan 23 17:33:21 2012] Computing asymmetry using major and minor axis, asym = 1.07
[Tue Jan 24 05:38:40 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jan 24 05:38:40 2012] Initial guess for spatial extent in simple fitting = 5.01"
[Tue Jan 24 05:38:40 2012] source mask rpix=1.2, npix_max = 10, mask sum = 12, frac = 1.099
[Tue Jan 24 05:38:40 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 5.01"
[Tue Jan 24 09:41:29 2012] fullrun_mos2_xmm0109270101_pi300-10000_cl_pass1_src9.ximg exists
[Tue Jan 24 09:41:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109270101_pi300-10000_cl_pass1_src9.csv
[Tue Jan 24 09:41:29 2012] fullrun_mos2_xmm0109270101_pi300-10000_cl_pass1_src9_1.ximg exists
[Tue Jan 24 09:41:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109270101_pi300-10000_cl_pass1_src9.csv
[Tue Jan 24 09:41:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109270101_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109270101_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 24 09:41:30 2012] fullrun_mos2_xmm0109270101_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Tue Jan 24 09:41:30 2012] fullrun_mos2_xmm0109270101_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Tue Jan 24 09:41:30 2012] Fit fullrun_mos2_xmm0109270101_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Tue Jan 24 09:42:28 2012] Spatial fit model total counts = 4303.000000, observed total counts = 4303.000000
[Tue Jan 24 09:42:28 2012] Offset between fit and detection position for source 12 = 0.011328 pixels
[Tue Jan 24 09:42:28 2012] 4307.030000 total counts/ 1573.440000 bgd. counts: snr = 68.914131
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.011328 pixels
  Position = (319.9, 235.7) = 0 42 28.04 41 12 21.8
  Extent = 5.0 (4.9-5.2)", rotation angle = 0
  Source counts = 2733.6 +/- 65.6
  Background counts = 1573.4
  Rate = 0.05 +/- 0.001
[Tue Jan 24 09:42:28 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 09:42:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 09:42:28 2012] Assessing source extent using major axis lower bound
[Tue Jan 24 09:42:28 2012] Source does appear to be extended
[Tue Jan 24 09:42:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan 26 04:06:48 2012] Counts = 2733.590000, rescaling region sizes by 2.000000
[Thu Jan 26 04:06:48 2012] XMMSAS src. selection expression = ellipse(27781.066720, 20459.320600, 603.744017, 603.744017, 0.000000, X, Y)
[Thu Jan 26 04:06:48 2012] Writing source region out to fullrun_mos2_xmm0109270101_pi300-10000_pass1_cl_src12_src.reg
[Thu Jan 26 04:06:48 2012] Extracting stamp from image fullrun_mos2_xmm0109270101_pi300-10000_cl_sm2.00.img.gz, (285, 201) - (355, 270)
[Thu Jan 26 04:06:48 2012] XMMSAS bgd. selection expression = annulus(27781.066720, 20459.320600, 2012.480058, 4024.960116, X, Y) && !ellipse(25488.967800, 24846.103000, 2391.876069, 2391.876069, 0.000000, X, Y) && !ellipse(28987.038800, 24302.972000, 385.732011, 385.732011, 0.000000, X, Y) && !ellipse(23271.114480, 24106.991000, 709.465620, 416.044812, 302.484200, X, Y) && !ellipse(24573.510000, 24546.796000, 3483.504100, 3483.504100, 0.000000, X, Y) && !ellipse(29958.690225, 22425.933377, 395.144331, 342.688853, 126.428450, X, Y) && !ellipse(26904.647200, 21467.676400, 506.774415, 382.741611, 334.287760, X, Y) && !ellipse(30760.909580, 20715.312600, 469.759214, 469.759214, 0.000000, X, Y) && !ellipse(24531.758000, 24679.156000, 1089.680031, 1089.680031, 0.000000, X, Y) && !ellipse(24053.481180, 19557.593600, 334.278410, 334.278410, 0.000000, X, Y) && !ellipse(27808.864820, 17601.411200, 469.437614, 347.117610, 346.854837, X, Y) && !ellipse(29107.099240, 21873.084800, 349.989610, 349.989610, 0.000000, X, Y) && !ellipse(29318.269287, 24813.693481, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24622.764400, 23296.156800, 292.101608, 292.101608, 0.000000, X, Y) && !ellipse(29985.614140, 20481.085000, 323.876009, 323.876009, 0.000000, X, Y) && !ellipse(26510.259857, 25181.353973, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24149.113098, 19912.562500, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29296.038727, 22755.732483, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23985.031000, 22546.821400, 299.469609, 299.469609, 0.000000, X, Y) && !ellipse(31534.148773, 18594.205048, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24386.322080, 21600.502200, 251.134407, 251.134407, 0.000000, X, Y) && !ellipse(24607.670000, 21628.774200, 1315.424038, 427.369612, -0.000000, X, Y) && !ellipse(28499.559143, 22029.028397, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31878.147644, 23811.887207, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25905.320800, 22195.844600, 338.904010, 338.904010, 0.000000, X, Y) && !ellipse(23500.558472, 19932.455307, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25833.997345, 23374.885315, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26721.294861, 24504.520630, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jan 26 04:06:48 2012] Writing fullrun_mos2_xmm0109270101_pi300-10000_pass1_cl_src12.gif
[Thu Jan 26 04:21:03 2012] Mean detx,y = (4333.18, 3197.43) 
[Thu Jan 26 04:21:04 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jan 26 04:21:28 2012] Binned source spectrum to 10 counts/bin
[Thu Jan 26 04:21:29 2012] Setting source spectrum file to fullrun_mos2_xmm0109270101_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Thu Jan 26 04:21:29 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0109270101_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Thu Jan 26 08:24:52 2012] Updating aperture counts using extracted products
[Thu Jan 26 08:24:52 2012] Error reading totcts from fullrun_mos2_xmm0109270101_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Thu Jan 26 08:24:55 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jan 26 08:24:55 2012] Using photon index=1.80, rate=0.0518, arf fullrun_mos2_xmm0109270101_pi300-10000_pass1_cl_src12.arf
[Thu Jan 26 08:24:55 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jan 26 08:24:55 2012] Updating source flux to 7.2e-13