[Mon Jan 23 01:20:39 2012] Detection parameters:
  Position = (298.0, 255.8) = 0 42 36.47 41 13 49.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 195.8 +/- 22.6
  Background counts = 123.6
  Rate = 0.004 +/- 0.0005

[Mon Jan 23 01:20:39 2012] Off-axis axis estimate = 3.09'
[Mon Jan 23 12:14:50 2012] Using EEF radius (= 7.97 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 12:14:50 2012] Initial guess for spatial extent in simple fitting = 7.97"
[Mon Jan 23 12:14:50 2012] source mask rpix=1.8, npix_max = 21, mask sum = 17, frac = 0.781
[Mon Jan 23 12:14:50 2012] Giving source the simple spatial ID 77 for pass 0, mean size = 7.97"
[Mon Jan 23 17:32:17 2012] fullrun_mos2_xmm0109270101_pi300-10000_cl_pass0_src77.ximg exists
[Mon Jan 23 17:32:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109270101_pi300-10000_cl_pass0_src77.csv
[Mon Jan 23 17:32:17 2012] fullrun_mos2_xmm0109270101_pi300-10000_cl_pass0_src77_1.ximg exists
[Mon Jan 23 17:32:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109270101_pi300-10000_cl_pass0_src77.csv
[Mon Jan 23 17:32:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109270101_pi300-10000_cl_pass0_src77_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109270101_pi300-10000_cl_pass0_src77.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 17:32:19 2012] fullrun_mos2_xmm0109270101_pi300-10000_cl_pass0_tfrozen_src77.ximg exists
[Mon Jan 23 17:32:19 2012] fullrun_mos2_xmm0109270101_pi300-10000_cl_pass0_tfrozen_src77_1.ximg exists
[Mon Jan 23 17:32:19 2012] Fit fullrun_mos2_xmm0109270101_pi300-10000_cl_pass0_tfrozen_src77 appears to have run properly
[Mon Jan 23 17:33:21 2012] Warning, spatial fit 77 centroid is now closest to src. 100
[Mon Jan 23 17:33:21 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 17:33:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 17:33:21 2012] Assessing source extent using major
[Mon Jan 23 17:33:21 2012] Source does appear to be extended
[Mon Jan 23 17:33:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 24 05:38:40 2012] Using EEF radius (= 7.97 ")to estimate initial spatial extent for simple fitting
[Tue Jan 24 05:38:40 2012] Initial guess for spatial extent in simple fitting = 7.97"
[Tue Jan 24 05:38:40 2012] source mask rpix=1.8, npix_max = 21, mask sum = 17, frac = 0.781
[Tue Jan 24 05:38:40 2012] Giving source the simple spatial ID 71 for pass 1, mean size = 7.97"
[Tue Jan 24 09:41:30 2012] fullrun_mos2_xmm0109270101_pi300-10000_cl_pass1_src71.ximg exists
[Tue Jan 24 09:41:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109270101_pi300-10000_cl_pass1_src71.csv
[Tue Jan 24 09:41:30 2012] fullrun_mos2_xmm0109270101_pi300-10000_cl_pass1_src71_1.ximg exists
[Tue Jan 24 09:41:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109270101_pi300-10000_cl_pass1_src71.csv
[Tue Jan 24 09:41:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109270101_pi300-10000_cl_pass1_src71_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109270101_pi300-10000_cl_pass1_src71.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 24 09:41:31 2012] fullrun_mos2_xmm0109270101_pi300-10000_cl_pass1_tfrozen_src71.ximg exists
[Tue Jan 24 09:41:31 2012] fullrun_mos2_xmm0109270101_pi300-10000_cl_pass1_tfrozen_src71_1.ximg exists
[Tue Jan 24 09:41:31 2012] Fit fullrun_mos2_xmm0109270101_pi300-10000_cl_pass1_tfrozen_src71 appears to have run properly
[Tue Jan 24 09:42:28 2012] Source 103 is offset by 4.998419 and -4.223169 pixels which is larger than
2 X fitted extent = 1.252005 x 1.252005, not incorporating fit results
[Tue Jan 24 09:42:28 2012] Spatial fit model total counts = 1708.170000, observed total counts = 1710.000000
[Tue Jan 24 09:42:28 2012] Offset between fit and detection position for source 103 = 0.324782 pixels
[Tue Jan 24 09:42:28 2012] 1650.599600 total counts/ 1561.790000 bgd. counts: snr = 2.247236
Spatial fit parameters:
  Offset between fit and detection position for source 103 = 0.324782 pixels
  Position = (298.3, 255.7) = 0 42 36.36 41 13 48.6
  Extent = 4.2 (2.9-5.5)", rotation angle = 0
  Source counts = 88.8 +/- 40.6
  Background counts = 1561.8
  Rate = 0.002 +/- 0.0008
[Tue Jan 24 09:42:28 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 09:42:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 09:42:28 2012] Assessing source extent using major axis lower bound
[Tue Jan 24 09:42:28 2012] Source does appear to be extended
[Tue Jan 24 09:42:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan 26 04:06:50 2012] XMMSAS src. selection expression = ellipse(25905.320800, 22195.844600, 254.178007, 254.178007, 0.000000, X, Y)
[Thu Jan 26 04:06:50 2012] Writing source region out to fullrun_mos2_xmm0109270101_pi300-10000_pass1_cl_src103_src.reg
[Thu Jan 26 04:06:50 2012] Extracting stamp from image fullrun_mos2_xmm0109270101_pi300-10000_cl_sm2.00.img.gz, (284, 241) - (313, 270)
[Thu Jan 26 04:06:50 2012] XMMSAS bgd. selection expression = annulus(25905.320800, 22195.844600, 423.630012, 847.260024, X, Y) && !ellipse(25488.967800, 24846.103000, 2391.876069, 2391.876069, 0.000000, X, Y) && !ellipse(24573.510000, 24546.796000, 3483.504100, 3483.504100, 0.000000, X, Y) && !ellipse(26904.647200, 21467.676400, 506.774415, 382.741611, 334.287760, X, Y) && !ellipse(24607.670000, 21628.774200, 1315.424038, 427.369612, -0.000000, X, Y) && !ellipse(25833.997345, 23374.885315, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jan 26 04:06:50 2012] Writing fullrun_mos2_xmm0109270101_pi300-10000_pass1_cl_src103.gif
[Thu Jan 26 05:08:03 2012] Mean detx,y = (2091.07, 1981.90) 
[Thu Jan 26 05:08:04 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jan 26 05:08:10 2012] Binned source spectrum to 10 counts/bin
[Thu Jan 26 05:08:10 2012] Setting source spectrum file to fullrun_mos2_xmm0109270101_pi300-10000_pass1_cl_src103_src_b10.pi.gz
[Thu Jan 26 05:08:10 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0109270101_pi300-10000_pass1_cl_src103_bgd.pi.gz
[Thu Jan 26 08:03:19 2012] Not generating rmf since there are only 88 counts
[Thu Jan 26 08:03:19 2012] rmf not generated due to insufficient counts
[Thu Jan 26 08:24:54 2012] Updating aperture counts using extracted products
[Thu Jan 26 08:24:54 2012] Error reading totcts from fullrun_mos2_xmm0109270101_pi300-10000_pass1_cl_src103_src_b10.pi.gz
[Thu Jan 26 08:24:56 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jan 26 08:24:56 2012] Using photon index=1.80, rate=0.00168, arf fullrun_mos2_xmm0109270101_pi300-10000_pass1_cl_src103.arf
[Thu Jan 26 08:24:56 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jan 26 08:24:56 2012] Updating source flux to 2.3e-14
[Thu Jan 26 08:34:08 2012] Flag b found in src. 103 procflags, skipping spectral fitting
[Thu Jan 26 08:34:08 2012] Source 103 has fewer than 100.000000 counts, skipping spectral fitting