[Mon Jan 23 01:20:03 2012] Detection parameters:
  Position = (328.2, 254.4) = 0 42 24.85 41 13 38.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 281.7 +/- 25.5
  Background counts = 84.5
  Rate = 0.007 +/- 0.0007

[Mon Jan 23 01:20:03 2012] Off-axis axis estimate = 3.85'
[Mon Jan 23 07:50:34 2012] Using EEF radius (= 8.36 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 07:50:34 2012] Initial guess for spatial extent in simple fitting = 8.36"
[Mon Jan 23 07:50:34 2012] source mask rpix=1.9, npix_max = 23, mask sum = 19, frac = 0.811
[Mon Jan 23 07:50:34 2012] Giving source the simple spatial ID 63 for pass 0, mean size = 8.36"
[Mon Jan 23 12:14:48 2012] fullrun_mos1_xmm0109270101_pi300-10000_cl_pass0_src63.ximg exists
[Mon Jan 23 12:14:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109270101_pi300-10000_cl_pass0_src63.csv
[Mon Jan 23 12:14:48 2012] fullrun_mos1_xmm0109270101_pi300-10000_cl_pass0_src63_1.ximg exists
[Mon Jan 23 12:14:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109270101_pi300-10000_cl_pass0_src63.csv
[Mon Jan 23 12:14:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109270101_pi300-10000_cl_pass0_src63_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109270101_pi300-10000_cl_pass0_src63.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 12:14:50 2012] fullrun_mos1_xmm0109270101_pi300-10000_cl_pass0_tfrozen_src63.ximg exists
[Mon Jan 23 12:14:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109270101_pi300-10000_cl_pass0_tfrozen_src63.csv
[Mon Jan 23 12:14:50 2012] fullrun_mos1_xmm0109270101_pi300-10000_cl_pass0_tfrozen_src63_1.ximg exists
[Mon Jan 23 12:14:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109270101_pi300-10000_cl_pass0_tfrozen_src63.csv
[Mon Jan 23 12:14:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109270101_pi300-10000_cl_pass0_tfrozen_src63_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109270101_pi300-10000_cl_pass0_tfrozen_src63.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 17:33:01 2012] Warning: source 16 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 96 at 10.581529 pixels away
[Mon Jan 23 17:33:02 2012] Spatial fit model total counts = 1088.430000, observed total counts = 2106.000000
[Mon Jan 23 17:33:02 2012] Poor agreement between spatial fit and data for source 96
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jan 23 17:33:02 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 17:33:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 17:33:02 2012] Assessing source extent using major
[Mon Jan 23 17:33:02 2012] Source does appear to be extended
[Mon Jan 23 17:33:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan 23 17:33:02 2012] Source is confused with source 32
[Tue Jan 24 01:57:42 2012] Using EEF radius (= 8.36 ")to estimate initial spatial extent for simple fitting
[Tue Jan 24 01:57:42 2012] Initial guess for spatial extent in simple fitting = 8.36"
[Tue Jan 24 01:57:42 2012] source mask rpix=1.9, npix_max = 23, mask sum = 19, frac = 0.811
[Tue Jan 24 01:57:42 2012] Giving source the simple spatial ID 60 for pass 1, mean size = 8.36"
[Tue Jan 24 05:38:38 2012] fullrun_mos1_xmm0109270101_pi300-10000_cl_pass1_src60.ximg exists
[Tue Jan 24 05:38:38 2012] fullrun_mos1_xmm0109270101_pi300-10000_cl_pass1_src60_1.ximg exists
[Tue Jan 24 05:38:38 2012] Fit fullrun_mos1_xmm0109270101_pi300-10000_cl_pass1_src60 appears to have run properly
[Tue Jan 24 05:38:40 2012] fullrun_mos1_xmm0109270101_pi300-10000_cl_pass1_tfrozen_src60.ximg exists
[Tue Jan 24 05:38:40 2012] fullrun_mos1_xmm0109270101_pi300-10000_cl_pass1_tfrozen_src60_1.ximg exists
[Tue Jan 24 05:38:40 2012] Fit fullrun_mos1_xmm0109270101_pi300-10000_cl_pass1_tfrozen_src60 appears to have run properly
[Tue Jan 24 09:42:11 2012] Warning: source 16 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 96 at 10.581529 pixels away
[Tue Jan 24 09:42:12 2012] Source 96 is offset by -7.082844 and 2.135058 pixels which is larger than
2 X fitted extent = 1.614230 x 1.614230, not incorporating fit results
[Tue Jan 24 09:42:12 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 09:42:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 09:42:12 2012] Assessing source extent using major
[Tue Jan 24 09:42:12 2012] Source does appear to be extended
[Tue Jan 24 09:42:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 25 03:12:30 2012] XMMSAS src. selection expression = ellipse(28501.672546, 22082.190048, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jan 25 03:12:30 2012] Writing source region out to fullrun_mos1_xmm0109270101_pi300-10000_pass1_cl_src96_src.reg
[Wed Jan 25 03:12:30 2012] Extracting stamp from image fullrun_mos1_xmm0109270101_pi300-10000_cl_sm2.00.img.gz, (291, 217) - (366, 292)
[Wed Jan 25 03:12:30 2012] XMMSAS bgd. selection expression = annulus(28501.672546, 22082.190048, 1087.500000, 2175.000000, X, Y) && !ellipse(25452.465140, 24868.198600, 1295.577637, 1268.961637, 90.000000, X, Y) && !ellipse(28976.528200, 24298.974260, 397.484811, 397.484811, 0.000000, X, Y) && !ellipse(27767.742179, 20460.769600, 454.018413, 402.854412, 146.766600, X, Y) && !ellipse(29955.063260, 22430.436400, 423.832812, 381.336011, 290.569500, X, Y) && !ellipse(26907.189392, 21461.757492, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29107.744260, 21893.081600, 314.949609, 314.949609, 0.000000, X, Y) && !ellipse(29324.107697, 24808.906464, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29292.138489, 22763.984314, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29799.454960, 20482.263400, 402.132012, 402.132012, 0.000000, X, Y) && !ellipse(25876.684906, 22215.597305, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jan 25 03:12:30 2012] Writing fullrun_mos1_xmm0109270101_pi300-10000_pass1_cl_src96.gif
[Wed Jan 25 03:58:36 2012] Mean detx,y = (1673.40, -4988.17) 
[Wed Jan 25 03:58:37 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jan 25 03:58:52 2012] Binned source spectrum to 10 counts/bin
[Wed Jan 25 03:58:52 2012] Setting source spectrum file to fullrun_mos1_xmm0109270101_pi300-10000_pass1_cl_src96_src_b10.pi.gz
[Wed Jan 25 03:58:52 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0109270101_pi300-10000_pass1_cl_src96_bgd.pi.gz
[Wed Jan 25 07:14:32 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jan 25 07:14:32 2012] rmf not generated due to insufficient counts
[Thu Jan 26 08:24:48 2012] Updating aperture counts using extracted products
[Thu Jan 26 08:24:48 2012] Error reading totcts from fullrun_mos1_xmm0109270101_pi300-10000_pass1_cl_src96_src_b10.pi.gz
[Thu Jan 26 08:24:51 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jan 26 08:24:51 2012] Using photon index=1.80, rate=0.00746, arf fullrun_mos1_xmm0109270101_pi300-10000_pass1_cl_src96.arf
[Thu Jan 26 08:24:51 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jan 26 08:24:51 2012] Updating source flux to 9e-14
[Thu Jan 26 08:25:00 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting