[Mon Jan 23 01:20:01 2012] Detection parameters:
  Position = (312.5, 290.7) = 0 42 30.87 41 16 19.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 4462.1 +/- 82.8
  Background counts = 123.8
  Rate = 0.09 +/- 0.002

[Mon Jan 23 01:20:03 2012] Off-axis axis estimate = 1.17'
[Mon Jan 23 07:50:34 2012] Using EEF radius (= 7.01 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 07:50:34 2012] Initial guess for spatial extent in simple fitting = 7.01"
[Mon Jan 23 07:50:34 2012] source mask rpix=1.6, npix_max = 17, mask sum = 20, frac = 1.121
[Mon Jan 23 07:50:34 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 7.01"
[Mon Jan 23 12:14:47 2012] fullrun_mos1_xmm0109270101_pi300-10000_cl_pass0_src10.ximg exists
[Mon Jan 23 12:14:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109270101_pi300-10000_cl_pass0_src10.csv
[Mon Jan 23 12:14:47 2012] fullrun_mos1_xmm0109270101_pi300-10000_cl_pass0_src10_1.ximg exists
[Mon Jan 23 12:14:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109270101_pi300-10000_cl_pass0_src10.csv
[Mon Jan 23 12:14:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109270101_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109270101_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 12:14:49 2012] fullrun_mos1_xmm0109270101_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Mon Jan 23 12:14:49 2012] fullrun_mos1_xmm0109270101_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Mon Jan 23 12:14:49 2012] Fit fullrun_mos1_xmm0109270101_pi300-10000_cl_pass0_tfrozen_src10 appears to have run properly
[Mon Jan 23 17:33:01 2012] Spatial fit model total counts = 5914.940000, observed total counts = 5915.000000
[Mon Jan 23 17:33:01 2012] Offset between fit and detection position for source 9 = 0.215136 pixels
[Mon Jan 23 17:33:01 2012] 5476.500000 total counts/ 2593.790000 bgd. counts: snr = 56.602231
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.215136 pixels
  Position = (312.4, 290.5) = 0 42 30.91 41 16 20.2
  Extent = 5.2 (5.0-5.4)", rotation angle = 0
  Source counts = 2882.7 +/- 74.0
  Background counts = 2593.8
  Rate = 0.05 +/- 0.001
[Mon Jan 23 17:33:02 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 17:33:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 17:33:02 2012] Assessing source extent using major axis lower bound
[Mon Jan 23 17:33:02 2012] Source does appear to be extended
[Mon Jan 23 17:33:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan 23 17:33:02 2012] Source is confused with source 52
[Tue Jan 24 01:57:42 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jan 24 01:57:42 2012] Initial guess for spatial extent in simple fitting = 5.19"
[Tue Jan 24 01:57:42 2012] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.785
[Tue Jan 24 01:57:42 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 5.19"
[Tue Jan 24 05:38:38 2012] fullrun_mos1_xmm0109270101_pi300-10000_cl_pass1_src10.ximg exists
[Tue Jan 24 05:38:38 2012] fullrun_mos1_xmm0109270101_pi300-10000_cl_pass1_src10_1.ximg exists
[Tue Jan 24 05:38:38 2012] Fit fullrun_mos1_xmm0109270101_pi300-10000_cl_pass1_src10 appears to have run properly
[Tue Jan 24 05:38:39 2012] fullrun_mos1_xmm0109270101_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Tue Jan 24 05:38:39 2012] fullrun_mos1_xmm0109270101_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Tue Jan 24 05:38:39 2012] Fit fullrun_mos1_xmm0109270101_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly
[Tue Jan 24 09:42:11 2012] Spatial fit model total counts = 5914.890000, observed total counts = 5915.000000
[Tue Jan 24 09:42:11 2012] Offset between fit and detection position for source 9 = 0.000065 pixels
[Tue Jan 24 09:42:11 2012] 5476.570000 total counts/ 2594.920000 bgd. counts: snr = 56.569097
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.000065 pixels
  Position = (312.4, 290.5) = 0 42 30.91 41 16 20.2
  Extent = 5.2 (5.0-5.4)", rotation angle = 0
  Source counts = 2881.7 +/- 74.0
  Background counts = 2594.9
  Rate = 0.05 +/- 0.001
[Tue Jan 24 09:42:12 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 09:42:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 09:42:12 2012] Assessing source extent using major axis lower bound
[Tue Jan 24 09:42:12 2012] Source does appear to be extended
[Tue Jan 24 09:42:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 25 03:12:28 2012] Counts = 2881.650000, rescaling region sizes by 2.000000
[Wed Jan 25 03:12:28 2012] XMMSAS src. selection expression = ellipse(27132.585800, 25226.709400, 622.506018, 622.506018, 0.000000, X, Y)
[Wed Jan 25 03:12:28 2012] Writing source region out to fullrun_mos1_xmm0109270101_pi300-10000_pass1_cl_src9_src.reg
[Wed Jan 25 03:12:28 2012] Extracting stamp from image fullrun_mos1_xmm0109270101_pi300-10000_cl_sm2.00.img.gz, (277, 255) - (348, 326)
[Wed Jan 25 03:12:29 2012] XMMSAS bgd. selection expression = annulus(27132.585800, 25226.709400, 2075.020060, 4150.040119, X, Y) && !ellipse(25452.465140, 24868.198600, 1295.577637, 1268.961637, 90.000000, X, Y) && !ellipse(28976.528200, 24298.974260, 397.484811, 397.484811, 0.000000, X, Y) && !ellipse(23534.728000, 25320.196000, 475.852814, 475.852814, 0.000000, X, Y) && !ellipse(23058.222000, 23929.614000, 1324.232038, 1324.232038, 0.000000, X, Y) && !ellipse(31185.438756, 27920.305400, 432.920812, 432.920812, 0.000000, X, Y) && !ellipse(24093.924000, 25010.504000, 1152.408033, 468.993613, 41.401000, X, Y) && !ellipse(29955.063260, 22430.436400, 423.832812, 381.336011, 290.569500, X, Y) && !ellipse(26907.189392, 21461.757492, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24596.654000, 24603.898000, 1161.272033, 1161.272033, 0.000000, X, Y) && !ellipse(29107.744260, 21893.081600, 314.949609, 314.949609, 0.000000, X, Y) && !ellipse(29324.107697, 24808.906464, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27112.976200, 29175.128800, 383.154411, 383.154411, 0.000000, X, Y) && !ellipse(23960.483940, 26445.112600, 323.214409, 323.214409, 0.000000, X, Y) && !ellipse(24612.604800, 23306.759600, 341.010410, 341.010410, 0.000000, X, Y) && !ellipse(28276.567000, 28691.091800, 381.789611, 381.789611, 0.000000, X, Y) && !ellipse(26510.684662, 25181.149536, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26219.996760, 29706.571200, 418.304012, 418.304012, 0.000000, X, Y) && !ellipse(29292.138489, 22763.984314, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30613.390200, 26410.306000, 363.573610, 363.573610, 0.000000, X, Y) && !ellipse(21812.910000, 27830.144000, 1295.288037, 1295.288037, 0.000000, X, Y) && !ellipse(23051.886000, 27523.662400, 354.139210, 354.139210, 0.000000, X, Y) && !ellipse(25261.918000, 22948.122000, 328.924809, 328.924809, 0.000000, X, Y) && !ellipse(24386.856780, 21595.266400, 386.473611, 386.473611, 0.000000, X, Y) && !ellipse(25085.561200, 28108.038400, 348.684010, 348.684010, 0.000000, X, Y) && !ellipse(24000.368000, 22532.766600, 349.082410, 349.082410, 0.000000, X, Y) && !ellipse(31432.657623, 27192.870544, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28501.672546, 22082.190048, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32011.047791, 26911.971100, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24973.449400, 21731.310000, 329.228809, 195.058406, 126.143500, X, Y) && !ellipse(22797.996000, 25245.994000, 2381.496069, 2381.496069, 0.000000, X, Y) && !ellipse(22441.767303, 23158.447327, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31698.805725, 20980.990097, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25876.684906, 22215.597305, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21582.076000, 27083.106000, 2554.560074, 2554.560074, 0.000000, X, Y) && !ellipse(22526.744171, 27023.004425, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22021.478000, 26462.376000, 1266.248036, 1266.248036, 0.000000, X, Y) && !ellipse(22853.870331, 23017.380310, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jan 25 03:12:29 2012] Writing fullrun_mos1_xmm0109270101_pi300-10000_pass1_cl_src9.gif
[Wed Jan 25 03:22:19 2012] Mean detx,y = (-1007.50, -2676.21) 
[Wed Jan 25 03:22:20 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jan 25 03:22:44 2012] Binned source spectrum to 10 counts/bin
[Wed Jan 25 03:22:45 2012] Setting source spectrum file to fullrun_mos1_xmm0109270101_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Wed Jan 25 03:22:45 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0109270101_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Thu Jan 26 08:24:46 2012] Updating aperture counts using extracted products
[Thu Jan 26 08:24:46 2012] Error reading totcts from fullrun_mos1_xmm0109270101_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Thu Jan 26 08:24:50 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jan 26 08:24:50 2012] Using photon index=1.80, rate=0.0548, arf fullrun_mos1_xmm0109270101_pi300-10000_pass1_cl_src9.arf
[Thu Jan 26 08:24:50 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jan 26 08:24:50 2012] Updating source flux to 6e-13
[Thu Jan 26 08:25:00 2012] Flag c found in src. 9 procflags, skipping spectral fitting