[Mon Jan 23 01:20:01 2012] Detection parameters:
  Position = (359.2, 321.3) = 0 42 12.85 41 18 34.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3704.4 +/- 73.5
  Background counts = 66.1
  Rate = 0.1 +/- 0.002

[Mon Jan 23 01:20:03 2012] Off-axis axis estimate = 4.71'
[Mon Jan 23 07:50:34 2012] Using EEF radius (= 8.78 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 07:50:34 2012] Initial guess for spatial extent in simple fitting = 8.78"
[Mon Jan 23 07:50:34 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.985
[Mon Jan 23 07:50:34 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 8.78"
[Mon Jan 23 12:14:47 2012] fullrun_mos1_xmm0109270101_pi300-10000_cl_pass0_src7.ximg exists
[Mon Jan 23 12:14:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109270101_pi300-10000_cl_pass0_src7.csv
[Mon Jan 23 12:14:47 2012] fullrun_mos1_xmm0109270101_pi300-10000_cl_pass0_src7_1.ximg exists
[Mon Jan 23 12:14:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109270101_pi300-10000_cl_pass0_src7.csv
[Mon Jan 23 12:14:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109270101_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109270101_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 12:14:49 2012] fullrun_mos1_xmm0109270101_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Mon Jan 23 12:14:49 2012] fullrun_mos1_xmm0109270101_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Mon Jan 23 12:14:49 2012] Fit fullrun_mos1_xmm0109270101_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Mon Jan 23 17:33:01 2012] Spatial fit model total counts = 3735.100000, observed total counts = 3734.000000
[Mon Jan 23 17:33:01 2012] Offset between fit and detection position for source 6 = 0.273615 pixels
[Mon Jan 23 17:33:01 2012] 3714.350000 total counts/ 1177.340000 bgd. counts: snr = 73.938601
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.273615 pixels
  Position = (359.0, 321.5) = 0 42 12.92 41 18 34.7
  Extent = 5.4 (5.3-5.6)", rotation angle = 0
  Source counts = 2537.0 +/- 60.9
  Background counts = 1177.3
  Rate = 0.05 +/- 0.001
[Mon Jan 23 17:33:02 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 17:33:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 17:33:02 2012] Assessing source extent using major axis lower bound
[Mon Jan 23 17:33:02 2012] Source does appear to be extended
[Mon Jan 23 17:33:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 24 01:57:42 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jan 24 01:57:42 2012] Initial guess for spatial extent in simple fitting = 5.41"
[Tue Jan 24 01:57:42 2012] source mask rpix=1.2, npix_max = 12, mask sum = 12, frac = 0.986
[Tue Jan 24 01:57:42 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 5.41"
[Tue Jan 24 05:38:37 2012] fullrun_mos1_xmm0109270101_pi300-10000_cl_pass1_src7.ximg exists
[Tue Jan 24 05:38:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109270101_pi300-10000_cl_pass1_src7.csv
[Tue Jan 24 05:38:37 2012] fullrun_mos1_xmm0109270101_pi300-10000_cl_pass1_src7_1.ximg exists
[Tue Jan 24 05:38:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109270101_pi300-10000_cl_pass1_src7.csv
[Tue Jan 24 05:38:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109270101_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109270101_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 24 05:38:39 2012] fullrun_mos1_xmm0109270101_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Tue Jan 24 05:38:39 2012] fullrun_mos1_xmm0109270101_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Tue Jan 24 05:38:39 2012] Fit fullrun_mos1_xmm0109270101_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Tue Jan 24 09:42:11 2012] Spatial fit model total counts = 3733.230000, observed total counts = 3734.000000
[Tue Jan 24 09:42:11 2012] Offset between fit and detection position for source 6 = 0.000638 pixels
[Tue Jan 24 09:42:11 2012] 3713.100000 total counts/ 1180.960000 bgd. counts: snr = 73.683478
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.000638 pixels
  Position = (359.0, 321.5) = 0 42 12.92 41 18 34.7
  Extent = 5.4 (5.3-5.5)", rotation angle = 0
  Source counts = 2532.1 +/- 60.9
  Background counts = 1181.0
  Rate = 0.05 +/- 0.001
[Tue Jan 24 09:42:12 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 09:42:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 09:42:12 2012] Assessing source extent using major axis lower bound
[Tue Jan 24 09:42:12 2012] Source does appear to be extended
[Tue Jan 24 09:42:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 25 03:12:28 2012] Counts = 2532.140000, rescaling region sizes by 2.000000
[Wed Jan 25 03:12:28 2012] XMMSAS src. selection expression = ellipse(31185.438756, 27920.305400, 649.381219, 649.381219, 0.000000, X, Y)
[Wed Jan 25 03:12:28 2012] Writing source region out to fullrun_mos1_xmm0109270101_pi300-10000_pass1_cl_src6_src.reg
[Wed Jan 25 03:12:28 2012] Extracting stamp from image fullrun_mos1_xmm0109270101_pi300-10000_cl_sm2.00.img.gz, (322, 284) - (396, 359)
[Wed Jan 25 03:12:28 2012] XMMSAS bgd. selection expression = annulus(31185.438756, 27920.305400, 2164.604062, 4329.208125, X, Y) && !ellipse(28976.528200, 24298.974260, 397.484811, 397.484811, 0.000000, X, Y) && !ellipse(27132.585800, 25226.709400, 415.004012, 415.004012, 0.000000, X, Y) && !ellipse(32412.606000, 27499.648000, 409.639212, 409.639212, 0.000000, X, Y) && !ellipse(29324.107697, 24808.906464, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27112.976200, 29175.128800, 383.154411, 383.154411, 0.000000, X, Y) && !ellipse(28276.567000, 28691.091800, 381.789611, 381.789611, 0.000000, X, Y) && !ellipse(26510.684662, 25181.149536, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32134.687195, 30578.324951, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29292.138489, 22763.984314, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30613.390200, 26410.306000, 363.573610, 363.573610, 0.000000, X, Y) && !ellipse(31432.657623, 27192.870544, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30672.521760, 30252.844200, 402.973612, 402.973612, 0.000000, X, Y) && !ellipse(32011.047791, 26911.971100, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31880.314430, 23796.698000, 443.914413, 443.914413, 0.000000, X, Y) && !ellipse(36076.444580, 23193.007843, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jan 25 03:12:28 2012] Writing fullrun_mos1_xmm0109270101_pi300-10000_pass1_cl_src6.gif
[Wed Jan 25 03:19:59 2012] Mean detx,y = (-4612.26, -5992.26) 
[Wed Jan 25 03:20:00 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jan 25 03:20:40 2012] Binned source spectrum to 10 counts/bin
[Wed Jan 25 03:20:40 2012] Setting source spectrum file to fullrun_mos1_xmm0109270101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Wed Jan 25 03:20:40 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0109270101_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Thu Jan 26 08:24:46 2012] Updating aperture counts using extracted products
[Thu Jan 26 08:24:46 2012] Error reading totcts from fullrun_mos1_xmm0109270101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Thu Jan 26 08:24:49 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jan 26 08:24:49 2012] Using photon index=1.80, rate=0.0482, arf fullrun_mos1_xmm0109270101_pi300-10000_pass1_cl_src6.arf
[Thu Jan 26 08:24:49 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jan 26 08:24:49 2012] Updating source flux to 6.9e-13