[Mon Jan 23 01:20:01 2012] Detection parameters:
  Position = (271.2, 291.9) = 0 42 46.83 41 16 26.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 12646.6 +/- 136.6
  Background counts = 155.0
  Rate = 0.2 +/- 0.003

[Mon Jan 23 01:20:03 2012] Off-axis axis estimate = 2.03'
[Mon Jan 23 07:50:34 2012] Using EEF radius (= 7.45 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 07:50:34 2012] Initial guess for spatial extent in simple fitting = 7.45"
[Mon Jan 23 07:50:34 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.818
[Mon Jan 23 07:50:34 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 7.45"
[Mon Jan 23 12:14:47 2012] fullrun_mos1_xmm0109270101_pi300-10000_cl_pass0_src3.ximg exists
[Mon Jan 23 12:14:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109270101_pi300-10000_cl_pass0_src3.csv
[Mon Jan 23 12:14:47 2012] fullrun_mos1_xmm0109270101_pi300-10000_cl_pass0_src3_1.ximg exists
[Mon Jan 23 12:14:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109270101_pi300-10000_cl_pass0_src3.csv
[Mon Jan 23 12:14:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109270101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109270101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 12:14:49 2012] fullrun_mos1_xmm0109270101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Mon Jan 23 12:14:49 2012] fullrun_mos1_xmm0109270101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Mon Jan 23 12:14:49 2012] Fit fullrun_mos1_xmm0109270101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Mon Jan 23 17:33:01 2012] Warning, spatial fit 3 centroid is now closest to src. 89
[Mon Jan 23 17:33:02 2012] Source 5 is offset by 3.992595 and -4.983122 pixels which is larger than
2 X fitted extent = 0.893844 x 0.893844, not incorporating fit results
[Mon Jan 23 17:33:02 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 17:33:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 17:33:02 2012] Assessing source extent using major
[Mon Jan 23 17:33:02 2012] Source does appear to be extended
[Mon Jan 23 17:33:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan 23 17:33:02 2012] Source is confused with source 7
[Tue Jan 24 01:57:42 2012] Using EEF radius (= 7.45 ")to estimate initial spatial extent for simple fitting
[Tue Jan 24 01:57:42 2012] Initial guess for spatial extent in simple fitting = 7.45"
[Tue Jan 24 01:57:42 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.818
[Tue Jan 24 01:57:42 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 7.45"
[Tue Jan 24 05:38:37 2012] fullrun_mos1_xmm0109270101_pi300-10000_cl_pass1_src3.ximg exists
[Tue Jan 24 05:38:37 2012] fullrun_mos1_xmm0109270101_pi300-10000_cl_pass1_src3_1.ximg exists
[Tue Jan 24 05:38:37 2012] Fit fullrun_mos1_xmm0109270101_pi300-10000_cl_pass1_src3 appears to have run properly
[Tue Jan 24 05:38:39 2012] fullrun_mos1_xmm0109270101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Tue Jan 24 05:38:39 2012] fullrun_mos1_xmm0109270101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Tue Jan 24 05:38:39 2012] Fit fullrun_mos1_xmm0109270101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Tue Jan 24 09:42:11 2012] Spatial fit model total counts = 18416.000000, observed total counts = 18416.000000
[Tue Jan 24 09:42:11 2012] Offset between fit and detection position for source 5 = 0.301617 pixels
[Tue Jan 24 09:42:11 2012] 18481.950000 total counts/ 11122.500000 bgd. counts: snr = 69.782119
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.301617 pixels
  Position = (271.1, 291.6) = 0 42 46.87 41 16 24.7
  Extent = 7.1" x 5.0", rotation angle = 72
  Source counts = 7359.4 +/- 135.9
  Background counts = 11122.5
  Rate = 0.1 +/- 0.003
[Tue Jan 24 09:42:11 2012] Spatial fit model total counts = 22906.200000, observed total counts = 22920.000000
[Tue Jan 24 09:42:11 2012] Offset between fit and detection position for source 5 = 0.015279 pixels
[Tue Jan 24 09:42:11 2012] Warning, changing simple spatial fit ID from 3 to 11
[Tue Jan 24 09:42:11 2012] 23033.550000 total counts/ 16136.500000 bgd. counts: snr = 54.294858
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.015279 pixels
  Position = (271.1, 291.6) = 0 42 46.87 41 16 24.8
  Extent = 5.9 (5.8-6.1)", rotation angle = 0
  Source counts = 6897.1 +/- 151.8
  Background counts = 16136.5
  Rate = 0.1 +/- 0.003
[Tue Jan 24 09:42:12 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 09:42:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 09:42:12 2012] Assessing source extent using major axis lower bound
[Tue Jan 24 09:42:12 2012] Source does appear to be extended
[Tue Jan 24 09:42:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 25 03:12:28 2012] Counts = 6897.050000, rescaling region sizes by 2.000000
[Wed Jan 25 03:12:28 2012] XMMSAS src. selection expression = ellipse(23534.728000, 25320.196000, 713.779221, 713.779221, 0.000000, X, Y)
[Wed Jan 25 03:12:28 2012] Writing source region out to fullrun_mos1_xmm0109270101_pi300-10000_pass1_cl_src5_src.reg
[Wed Jan 25 03:12:28 2012] Extracting stamp from image fullrun_mos1_xmm0109270101_pi300-10000_cl_sm2.00.img.gz, (230, 251) - (312, 333)
[Wed Jan 25 03:12:28 2012] XMMSAS bgd. selection expression = annulus(23534.728000, 25320.196000, 2379.264068, 4758.528137, X, Y) && !ellipse(25452.465140, 24868.198600, 1295.577637, 1268.961637, 90.000000, X, Y) && !ellipse(23058.222000, 23929.614000, 1324.232038, 1324.232038, 0.000000, X, Y) && !ellipse(22320.995800, 28288.973800, 400.159212, 400.159212, 0.000000, X, Y) && !ellipse(21772.268180, 24870.694600, 367.389611, 367.389611, 0.000000, X, Y) && !ellipse(27767.742179, 20460.769600, 454.018413, 402.854412, 146.766600, X, Y) && !ellipse(27132.585800, 25226.709400, 415.004012, 415.004012, 0.000000, X, Y) && !ellipse(24093.924000, 25010.504000, 1152.408033, 468.993613, 41.401000, X, Y) && !ellipse(22316.508900, 24393.209600, 336.264810, 303.522409, 201.400000, X, Y) && !ellipse(19759.252200, 27289.851800, 393.276811, 393.276811, 0.000000, X, Y) && !ellipse(26907.189392, 21461.757492, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20656.645930, 24918.718600, 378.761611, 378.761611, 0.000000, X, Y) && !ellipse(24596.654000, 24603.898000, 1161.272033, 1161.272033, 0.000000, X, Y) && !ellipse(20710.960000, 28791.214600, 398.163211, 398.163211, 0.000000, X, Y) && !ellipse(19952.969840, 24089.530000, 417.838412, 417.838412, 0.000000, X, Y) && !ellipse(27112.976200, 29175.128800, 383.154411, 383.154411, 0.000000, X, Y) && !ellipse(23960.483940, 26445.112600, 323.214409, 323.214409, 0.000000, X, Y) && !ellipse(24612.604800, 23306.759600, 341.010410, 341.010410, 0.000000, X, Y) && !ellipse(28276.567000, 28691.091800, 381.789611, 381.789611, 0.000000, X, Y) && !ellipse(26510.684662, 25181.149536, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26219.996760, 29706.571200, 418.304012, 418.304012, 0.000000, X, Y) && !ellipse(24126.805542, 19926.838593, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21017.502060, 24211.485046, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21812.910000, 27830.144000, 1295.288037, 1295.288037, 0.000000, X, Y) && !ellipse(23051.886000, 27523.662400, 354.139210, 354.139210, 0.000000, X, Y) && !ellipse(25261.918000, 22948.122000, 328.924809, 328.924809, 0.000000, X, Y) && !ellipse(18669.995514, 20997.633148, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24386.856780, 21595.266400, 386.473611, 386.473611, 0.000000, X, Y) && !ellipse(19675.535800, 24826.832800, 312.641609, 312.641609, 0.000000, X, Y) && !ellipse(25085.561200, 28108.038400, 348.684010, 348.684010, 0.000000, X, Y) && !ellipse(24000.368000, 22532.766600, 349.082410, 349.082410, 0.000000, X, Y) && !ellipse(28501.672546, 22082.190048, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24973.449400, 21731.310000, 329.228809, 195.058406, 126.143500, X, Y) && !ellipse(22797.996000, 25245.994000, 2381.496069, 2381.496069, 0.000000, X, Y) && !ellipse(23512.941528, 19942.617432, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22441.767303, 23158.447327, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22101.521317, 27123.627380, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19958.134750, 30462.257690, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25876.684906, 22215.597305, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21582.076000, 27083.106000, 2554.560074, 2554.560074, 0.000000, X, Y) && !ellipse(22526.744171, 27023.004425, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22021.478000, 26462.376000, 1266.248036, 1266.248036, 0.000000, X, Y) && !ellipse(20338.028290, 22182.235535, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22853.870331, 23017.380310, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jan 25 03:12:28 2012] Writing fullrun_mos1_xmm0109270101_pi300-10000_pass1_cl_src5.gif
[Wed Jan 25 03:17:46 2012] Mean detx,y = (-224.22, 709.11) 
[Wed Jan 25 03:17:47 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jan 25 03:18:00 2012] Binned source spectrum to 10 counts/bin
[Wed Jan 25 03:18:00 2012] Setting source spectrum file to fullrun_mos1_xmm0109270101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Wed Jan 25 03:18:00 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0109270101_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Thu Jan 26 08:24:46 2012] Updating aperture counts using extracted products
[Thu Jan 26 08:24:46 2012] Error reading totcts from fullrun_mos1_xmm0109270101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Thu Jan 26 08:24:49 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jan 26 08:24:49 2012] Using photon index=1.80, rate=0.131, arf fullrun_mos1_xmm0109270101_pi300-10000_pass1_cl_src5.arf
[Thu Jan 26 08:24:49 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jan 26 08:24:49 2012] Updating source flux to 1.3e-12
[Thu Jan 26 08:25:00 2012] Flag b found in src. 5 procflags, skipping spectral fitting
[Thu Jan 26 08:25:00 2012] Flag c found in src. 5 procflags, skipping spectral fitting