[Mon Jan 23 01:20:02 2012] Detection parameters:
  Position = (249.8, 321.8) = 0 42 55.10 41 18 35.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 538.8 +/- 33.6
  Background counts = 115.0
  Rate = 0.01 +/- 0.0007

[Mon Jan 23 01:20:03 2012] Off-axis axis estimate = 3.91'
[Mon Jan 23 07:50:34 2012] Using EEF radius (= 8.39 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 07:50:34 2012] Initial guess for spatial extent in simple fitting = 8.39"
[Mon Jan 23 07:50:34 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.060
[Mon Jan 23 07:50:34 2012] Giving source the simple spatial ID 49 for pass 0, mean size = 8.39"
[Mon Jan 23 12:14:48 2012] fullrun_mos1_xmm0109270101_pi300-10000_cl_pass0_src49.ximg exists
[Mon Jan 23 12:14:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109270101_pi300-10000_cl_pass0_src49.csv
[Mon Jan 23 12:14:48 2012] fullrun_mos1_xmm0109270101_pi300-10000_cl_pass0_src49_1.ximg exists
[Mon Jan 23 12:14:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109270101_pi300-10000_cl_pass0_src49.csv
[Mon Jan 23 12:14:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109270101_pi300-10000_cl_pass0_src49_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109270101_pi300-10000_cl_pass0_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 12:14:49 2012] fullrun_mos1_xmm0109270101_pi300-10000_cl_pass0_tfrozen_src49.ximg exists
[Mon Jan 23 12:14:49 2012] fullrun_mos1_xmm0109270101_pi300-10000_cl_pass0_tfrozen_src49_1.ximg exists
[Mon Jan 23 12:14:49 2012] Fit fullrun_mos1_xmm0109270101_pi300-10000_cl_pass0_tfrozen_src49 appears to have run properly
[Mon Jan 23 17:33:02 2012] Source 49 is offset by 8.474278 and 4.523557 pixels which is larger than
2 X fitted extent = 7.710805 x 7.710805, not incorporating fit results
[Mon Jan 23 17:33:02 2012] Source 49 is offset by -0.360595 and 1.660430 pixels which is larger than
2 X fitted extent = 7.444184 x 1.301595, not incorporating fit results
[Mon Jan 23 17:33:02 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 17:33:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 17:33:02 2012] Assessing source extent using major
[Mon Jan 23 17:33:02 2012] Source does appear to be extended
[Mon Jan 23 17:33:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 24 01:57:42 2012] Using EEF radius (= 8.39 ")to estimate initial spatial extent for simple fitting
[Tue Jan 24 01:57:42 2012] Initial guess for spatial extent in simple fitting = 8.39"
[Tue Jan 24 01:57:42 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.060
[Tue Jan 24 01:57:42 2012] Giving source the simple spatial ID 46 for pass 1, mean size = 8.39"
[Tue Jan 24 05:38:38 2012] fullrun_mos1_xmm0109270101_pi300-10000_cl_pass1_src46.ximg exists
[Tue Jan 24 05:38:38 2012] fullrun_mos1_xmm0109270101_pi300-10000_cl_pass1_src46_1.ximg exists
[Tue Jan 24 05:38:38 2012] Fit fullrun_mos1_xmm0109270101_pi300-10000_cl_pass1_src46 appears to have run properly
[Tue Jan 24 05:38:40 2012] fullrun_mos1_xmm0109270101_pi300-10000_cl_pass1_tfrozen_src46.ximg exists
[Tue Jan 24 05:38:40 2012] fullrun_mos1_xmm0109270101_pi300-10000_cl_pass1_tfrozen_src46_1.ximg exists
[Tue Jan 24 05:38:40 2012] Fit fullrun_mos1_xmm0109270101_pi300-10000_cl_pass1_tfrozen_src46 appears to have run properly
[Tue Jan 24 09:42:11 2012] Source 49 is offset by 8.474278 and 4.808155 pixels which is larger than
2 X fitted extent = 7.710805 x 7.710805, not incorporating fit results
[Tue Jan 24 09:42:12 2012] Spatial fit model total counts = 2031.440000, observed total counts = 2027.000000
[Tue Jan 24 09:42:12 2012] Offset between fit and detection position for source 49 = 2.025626 pixels
[Tue Jan 24 09:42:12 2012] Warning, changing simple spatial fit ID from 46 to 75
[Tue Jan 24 09:42:12 2012] 1973.264000 total counts/ 1680.970000 bgd. counts: snr = 7.129186
Spatial fit parameters:
  Offset between fit and detection position for source 49 = 2.025626 pixels
  Position = (251.3, 320.4) = 0 42 54.52 41 18 30.2
  Extent = 16.2 (16.2-32.4)", rotation angle = 0
  Source counts = 292.3 +/- 44.4
  Background counts = 1681.0
  Rate = 0.006 +/- 0.0008
[Tue Jan 24 09:42:12 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 09:42:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 09:42:12 2012] Assessing source extent using major axis lower bound
[Tue Jan 24 09:42:12 2012] Source does appear to be extended
[Tue Jan 24 09:42:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 24 09:42:12 2012] Source is confused with source 13
[Wed Jan 25 03:12:30 2012] XMMSAS src. selection expression = ellipse(21812.910000, 27830.144000, 971.466028, 971.466028, 0.000000, X, Y)
[Wed Jan 25 03:12:30 2012] Writing source region out to fullrun_mos1_xmm0109270101_pi300-10000_pass1_cl_src49_src.reg
[Wed Jan 25 03:12:30 2012] Extracting stamp from image fullrun_mos1_xmm0109270101_pi300-10000_cl_sm2.00.img.gz, (195, 265) - (307, 376)
[Wed Jan 25 03:12:30 2012] XMMSAS bgd. selection expression = annulus(21812.910000, 27830.144000, 1619.110047, 3238.220093, X, Y) && !ellipse(25452.465140, 24868.198600, 1295.577637, 1268.961637, 90.000000, X, Y) && !ellipse(23534.728000, 25320.196000, 475.852814, 475.852814, 0.000000, X, Y) && !ellipse(23058.222000, 23929.614000, 1324.232038, 1324.232038, 0.000000, X, Y) && !ellipse(22320.995800, 28288.973800, 400.159212, 400.159212, 0.000000, X, Y) && !ellipse(21772.268180, 24870.694600, 367.389611, 367.389611, 0.000000, X, Y) && !ellipse(24093.924000, 25010.504000, 1152.408033, 468.993613, 41.401000, X, Y) && !ellipse(22316.508900, 24393.209600, 336.264810, 303.522409, 201.400000, X, Y) && !ellipse(19759.252200, 27289.851800, 393.276811, 393.276811, 0.000000, X, Y) && !ellipse(20656.645930, 24918.718600, 378.761611, 378.761611, 0.000000, X, Y) && !ellipse(24596.654000, 24603.898000, 1161.272033, 1161.272033, 0.000000, X, Y) && !ellipse(20710.960000, 28791.214600, 398.163211, 398.163211, 0.000000, X, Y) && !ellipse(19895.202400, 31232.011000, 368.165611, 368.165611, 0.000000, X, Y) && !ellipse(23960.483940, 26445.112600, 323.214409, 323.214409, 0.000000, X, Y) && !ellipse(21017.502060, 24211.485046, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23051.886000, 27523.662400, 354.139210, 354.139210, 0.000000, X, Y) && !ellipse(19675.535800, 24826.832800, 312.641609, 312.641609, 0.000000, X, Y) && !ellipse(25085.561200, 28108.038400, 348.684010, 348.684010, 0.000000, X, Y) && !ellipse(24759.323980, 30909.603400, 327.780809, 327.780809, 0.000000, X, Y) && !ellipse(22797.996000, 25245.994000, 2381.496069, 2381.496069, 0.000000, X, Y) && !ellipse(22101.521317, 27123.627380, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19958.134750, 30462.257690, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21582.076000, 27083.106000, 2554.560074, 2554.560074, 0.000000, X, Y) && !ellipse(22526.744171, 27023.004425, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22021.478000, 26462.376000, 1266.248036, 1266.248036, 0.000000, X, Y)
[Wed Jan 25 03:12:30 2012] Writing fullrun_mos1_xmm0109270101_pi300-10000_pass1_cl_src49.gif
[Wed Jan 25 03:54:21 2012] Mean detx,y = (-2609.17, 2835.96) 
[Wed Jan 25 03:54:22 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jan 25 03:54:29 2012] Binned source spectrum to 10 counts/bin
[Wed Jan 25 03:54:29 2012] Setting source spectrum file to fullrun_mos1_xmm0109270101_pi300-10000_pass1_cl_src49_src_b10.pi.gz
[Wed Jan 25 03:54:29 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0109270101_pi300-10000_pass1_cl_src49_bgd.pi.gz
[Thu Jan 26 08:24:47 2012] Updating aperture counts using extracted products
[Thu Jan 26 08:24:47 2012] Error reading totcts from fullrun_mos1_xmm0109270101_pi300-10000_pass1_cl_src49_src_b10.pi.gz
[Thu Jan 26 08:24:51 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jan 26 08:24:51 2012] Using photon index=1.80, rate=0.00556, arf fullrun_mos1_xmm0109270101_pi300-10000_pass1_cl_src49.arf
[Thu Jan 26 08:24:51 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jan 26 08:24:51 2012] Updating source flux to 5.4e-14
[Thu Jan 26 08:25:00 2012] Flag b found in src. 49 procflags, skipping spectral fitting
[Thu Jan 26 08:25:00 2012] Flag c found in src. 49 procflags, skipping spectral fitting