[Mon Jan 23 01:20:02 2012] Detection parameters:
  Position = (369.9, 352.0) = 0 42 8.69 41 20 48.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 405.4 +/- 26.2
  Background counts = 57.8
  Rate = 0.01 +/- 0.0009

[Mon Jan 23 01:20:03 2012] Off-axis axis estimate = 6.48'
[Mon Jan 23 07:50:34 2012] Using EEF radius (= 9.67 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 07:50:34 2012] Initial guess for spatial extent in simple fitting = 9.67"
[Mon Jan 23 07:50:34 2012] source mask rpix=2.2, npix_max = 29, mask sum = 36, frac = 1.214
[Mon Jan 23 07:50:34 2012] Giving source the simple spatial ID 43 for pass 0, mean size = 9.67"
[Mon Jan 23 12:14:48 2012] fullrun_mos1_xmm0109270101_pi300-10000_cl_pass0_src43.ximg exists
[Mon Jan 23 12:14:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109270101_pi300-10000_cl_pass0_src43.csv
[Mon Jan 23 12:14:48 2012] fullrun_mos1_xmm0109270101_pi300-10000_cl_pass0_src43_1.ximg exists
[Mon Jan 23 12:14:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109270101_pi300-10000_cl_pass0_src43.csv
[Mon Jan 23 12:14:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109270101_pi300-10000_cl_pass0_src43_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109270101_pi300-10000_cl_pass0_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 12:14:49 2012] fullrun_mos1_xmm0109270101_pi300-10000_cl_pass0_tfrozen_src43.ximg exists
[Mon Jan 23 12:14:49 2012] fullrun_mos1_xmm0109270101_pi300-10000_cl_pass0_tfrozen_src43_1.ximg exists
[Mon Jan 23 12:14:49 2012] Fit fullrun_mos1_xmm0109270101_pi300-10000_cl_pass0_tfrozen_src43 appears to have run properly
[Mon Jan 23 17:33:02 2012] Warning: source 43 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 44 at 11.819896 pixels away
[Mon Jan 23 17:33:02 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 17:33:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 17:33:02 2012] Assessing source extent using major
[Mon Jan 23 17:33:02 2012] Source does appear to be extended
[Mon Jan 23 17:33:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 24 01:57:42 2012] Using EEF radius (= 9.67 ")to estimate initial spatial extent for simple fitting
[Tue Jan 24 01:57:42 2012] Initial guess for spatial extent in simple fitting = 9.67"
[Tue Jan 24 01:57:42 2012] source mask rpix=2.2, npix_max = 29, mask sum = 36, frac = 1.214
[Tue Jan 24 01:57:42 2012] Giving source the simple spatial ID 40 for pass 1, mean size = 9.67"
[Tue Jan 24 05:38:38 2012] fullrun_mos1_xmm0109270101_pi300-10000_cl_pass1_src40.ximg exists
[Tue Jan 24 05:38:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109270101_pi300-10000_cl_pass1_src40.csv
[Tue Jan 24 05:38:38 2012] fullrun_mos1_xmm0109270101_pi300-10000_cl_pass1_src40_1.ximg exists
[Tue Jan 24 05:38:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109270101_pi300-10000_cl_pass1_src40.csv
[Tue Jan 24 05:38:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109270101_pi300-10000_cl_pass1_src40_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109270101_pi300-10000_cl_pass1_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 24 05:38:39 2012] fullrun_mos1_xmm0109270101_pi300-10000_cl_pass1_tfrozen_src40.ximg exists
[Tue Jan 24 05:38:39 2012] fullrun_mos1_xmm0109270101_pi300-10000_cl_pass1_tfrozen_src40_1.ximg exists
[Tue Jan 24 05:38:39 2012] Fit fullrun_mos1_xmm0109270101_pi300-10000_cl_pass1_tfrozen_src40 appears to have run properly
[Tue Jan 24 09:42:11 2012] Warning: source 40 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 44 at 13.326037 pixels away
[Tue Jan 24 09:42:12 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 09:42:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 09:42:12 2012] Assessing source extent using major
[Tue Jan 24 09:42:12 2012] Source does appear to be extended
[Tue Jan 24 09:42:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 25 03:12:30 2012] XMMSAS src. selection expression = ellipse(32134.687195, 30578.324951, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jan 25 03:12:30 2012] Writing source region out to fullrun_mos1_xmm0109270101_pi300-10000_pass1_cl_src44_src.reg
[Wed Jan 25 03:12:30 2012] Extracting stamp from image fullrun_mos1_xmm0109270101_pi300-10000_cl_sm2.00.img.gz, (332, 315) - (407, 390)
[Wed Jan 25 03:12:30 2012] XMMSAS bgd. selection expression = annulus(32134.687195, 30578.324951, 1087.500000, 2175.000000, X, Y) && !ellipse(30672.521760, 30252.844200, 402.973612, 402.973612, 0.000000, X, Y)
[Wed Jan 25 03:12:30 2012] Writing fullrun_mos1_xmm0109270101_pi300-10000_pass1_cl_src44.gif
[Wed Jan 25 03:52:17 2012] Mean detx,y = (-7416.50, -6222.86) 
[Wed Jan 25 03:52:18 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jan 25 03:52:34 2012] Binned source spectrum to 10 counts/bin
[Wed Jan 25 03:52:34 2012] Setting source spectrum file to fullrun_mos1_xmm0109270101_pi300-10000_pass1_cl_src44_src_b10.pi.gz
[Wed Jan 25 03:52:34 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0109270101_pi300-10000_pass1_cl_src44_bgd.pi.gz
[Wed Jan 25 06:31:26 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jan 25 06:31:26 2012] rmf not generated due to insufficient counts
[Thu Jan 26 08:24:47 2012] Updating aperture counts using extracted products
[Thu Jan 26 08:24:47 2012] Error reading totcts from fullrun_mos1_xmm0109270101_pi300-10000_pass1_cl_src44_src_b10.pi.gz
[Thu Jan 26 08:24:51 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jan 26 08:24:51 2012] Using photon index=1.80, rate=0.0138, arf fullrun_mos1_xmm0109270101_pi300-10000_pass1_cl_src44.arf
[Thu Jan 26 08:24:51 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jan 26 08:24:51 2012] Updating source flux to 2.4e-13
[Thu Jan 26 08:25:00 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting