[Mon Jan 23 01:20:02 2012] Detection parameters:
  Position = (267.6, 414.7) = 0 42 48.25 41 25 20.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2296.5 +/- 57.9
  Background counts = 56.4
  Rate = 0.08 +/- 0.002

[Mon Jan 23 01:20:03 2012] Off-axis axis estimate = 8.72'
[Mon Jan 23 07:50:34 2012] Using EEF radius (= 10.79 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 07:50:34 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jan 23 07:50:34 2012] Initial guess for spatial extent in simple fitting = 10.79"
[Mon Jan 23 07:50:34 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.013
[Mon Jan 23 07:50:34 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 10.79"
[Mon Jan 23 12:14:47 2012] fullrun_mos1_xmm0109270101_pi300-10000_cl_pass0_src13.ximg exists
[Mon Jan 23 12:14:47 2012] fullrun_mos1_xmm0109270101_pi300-10000_cl_pass0_src13_1.ximg exists
[Mon Jan 23 12:14:47 2012] Fit fullrun_mos1_xmm0109270101_pi300-10000_cl_pass0_src13 appears to have run properly
[Mon Jan 23 12:14:49 2012] fullrun_mos1_xmm0109270101_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Mon Jan 23 12:14:49 2012] fullrun_mos1_xmm0109270101_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Mon Jan 23 12:14:49 2012] Fit fullrun_mos1_xmm0109270101_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Mon Jan 23 17:33:01 2012] Warning: source 13 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 41 at 14.590578 pixels away
[Mon Jan 23 17:33:02 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 17:33:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 17:33:02 2012] Assessing source extent using major
[Mon Jan 23 17:33:02 2012] Source does appear to be extended
[Mon Jan 23 17:33:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 24 01:57:42 2012] Using EEF radius (= 10.79 ")to estimate initial spatial extent for simple fitting
[Tue Jan 24 01:57:42 2012] Initial guess for spatial extent in simple fitting = 10.79"
[Tue Jan 24 01:57:42 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.013
[Tue Jan 24 01:57:42 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 10.79"
[Tue Jan 24 05:38:38 2012] fullrun_mos1_xmm0109270101_pi300-10000_cl_pass1_src13.ximg exists
[Tue Jan 24 05:38:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109270101_pi300-10000_cl_pass1_src13.csv
[Tue Jan 24 05:38:38 2012] fullrun_mos1_xmm0109270101_pi300-10000_cl_pass1_src13_1.ximg exists
[Tue Jan 24 05:38:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109270101_pi300-10000_cl_pass1_src13.csv
[Tue Jan 24 05:38:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109270101_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109270101_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 24 05:38:39 2012] fullrun_mos1_xmm0109270101_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Tue Jan 24 05:38:39 2012] fullrun_mos1_xmm0109270101_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Tue Jan 24 05:38:39 2012] Fit fullrun_mos1_xmm0109270101_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly
[Tue Jan 24 09:42:11 2012] Warning: source 13 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 41 at 12.751822 pixels away
[Tue Jan 24 09:42:12 2012] Warning: source 58 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 41 at 34.289192 pixels away
[Tue Jan 24 09:42:12 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 09:42:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 09:42:12 2012] Assessing source extent using major
[Tue Jan 24 09:42:12 2012] Source does appear to be extended
[Tue Jan 24 09:42:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 25 03:12:29 2012] Counts = 2296.472168, rescaling region sizes by 2.000000
[Wed Jan 25 03:12:29 2012] XMMSAS src. selection expression = ellipse(23229.028625, 36033.292389, 1305.000000, 1305.000000, 0.000000, X, Y)
[Wed Jan 25 03:12:29 2012] Writing source region out to fullrun_mos1_xmm0109270101_pi300-10000_pass1_cl_src41_src.reg
[Wed Jan 25 03:12:29 2012] Extracting stamp from image fullrun_mos1_xmm0109270101_pi300-10000_cl_sm2.00.img.gz, (193, 340) - (343, 490)
[Wed Jan 25 03:12:29 2012] XMMSAS bgd. selection expression = annulus(23229.028625, 36033.292389, 4350.000000, 8700.000000, X, Y) && !ellipse(22320.995800, 28288.973800, 400.159212, 400.159212, 0.000000, X, Y) && !ellipse(31185.438756, 27920.305400, 432.920812, 432.920812, 0.000000, X, Y) && !ellipse(19759.252200, 27289.851800, 393.276811, 393.276811, 0.000000, X, Y) && !ellipse(20710.960000, 28791.214600, 398.163211, 398.163211, 0.000000, X, Y) && !ellipse(27112.976200, 29175.128800, 383.154411, 383.154411, 0.000000, X, Y) && !ellipse(19895.202400, 31232.011000, 368.165611, 368.165611, 0.000000, X, Y) && !ellipse(28276.567000, 28691.091800, 381.789611, 381.789611, 0.000000, X, Y) && !ellipse(14342.500870, 27804.196350, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32134.687195, 30578.324951, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26219.996760, 29706.571200, 418.304012, 418.304012, 0.000000, X, Y) && !ellipse(21812.910000, 27830.144000, 1295.288037, 1295.288037, 0.000000, X, Y) && !ellipse(23051.886000, 27523.662400, 354.139210, 354.139210, 0.000000, X, Y) && !ellipse(28242.593380, 36634.689000, 396.929611, 396.929611, 0.000000, X, Y) && !ellipse(25085.561200, 28108.038400, 348.684010, 348.684010, 0.000000, X, Y) && !ellipse(31432.657623, 27192.870544, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21789.826600, 36676.618200, 990.464029, 990.464029, 0.000000, X, Y) && !ellipse(30672.521760, 30252.844200, 402.973612, 402.973612, 0.000000, X, Y) && !ellipse(32011.047791, 26911.971100, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15883.773254, 27063.161743, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17059.681247, 28005.024411, 529.673615, 527.198959, -0.000000, X, Y) && !ellipse(24759.323980, 30909.603400, 327.780809, 327.780809, 0.000000, X, Y) && !ellipse(22797.996000, 25245.994000, 2381.496069, 2381.496069, 0.000000, X, Y) && !ellipse(22101.521317, 27123.627380, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19958.134750, 30462.257690, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21582.076000, 27083.106000, 2554.560074, 2554.560074, 0.000000, X, Y) && !ellipse(27436.230530, 40449.073395, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22526.744171, 27023.004425, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22021.478000, 26462.376000, 1266.248036, 1266.248036, 0.000000, X, Y) && !ellipse(29554.327942, 37621.950409, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15232.210000, 29035.804000, 1797.688052, 1797.688052, 0.000000, X, Y)
[Wed Jan 25 03:12:29 2012] Writing fullrun_mos1_xmm0109270101_pi300-10000_pass1_cl_src41.gif
[Wed Jan 25 03:27:40 2012] Mean detx,y = (-10563.59, 3733.18) 
[Wed Jan 25 03:27:42 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jan 25 03:29:40 2012] Binned source spectrum to 10 counts/bin
[Wed Jan 25 03:29:40 2012] Setting source spectrum file to fullrun_mos1_xmm0109270101_pi300-10000_pass1_cl_src41_src_b10.pi.gz
[Wed Jan 25 03:29:40 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0109270101_pi300-10000_pass1_cl_src41_bgd.pi.gz
[Wed Jan 25 05:12:20 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jan 25 05:12:20 2012] rmf not generated due to insufficient counts
[Thu Jan 26 08:24:46 2012] Updating aperture counts using extracted products
[Thu Jan 26 08:24:46 2012] Error reading totcts from fullrun_mos1_xmm0109270101_pi300-10000_pass1_cl_src41_src_b10.pi.gz
[Thu Jan 26 08:24:50 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jan 26 08:24:50 2012] Using photon index=1.80, rate=0.0796, arf fullrun_mos1_xmm0109270101_pi300-10000_pass1_cl_src41.arf
[Thu Jan 26 08:24:50 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jan 26 08:24:50 2012] Updating source flux to 1.2e-12
[Thu Jan 26 08:25:00 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting