[Mon Jan 23 01:20:02 2012] Detection parameters:
  Position = (319.9, 202.9) = 0 42 28.05 41 9 58.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1268.3 +/- 44.0
  Background counts = 71.1
  Rate = 0.04 +/- 0.001

[Mon Jan 23 01:20:03 2012] Off-axis axis estimate = 7.10'
[Mon Jan 23 07:50:34 2012] Using EEF radius (= 9.98 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 07:50:34 2012] Initial guess for spatial extent in simple fitting = 9.98"
[Mon Jan 23 07:50:34 2012] source mask rpix=2.3, npix_max = 31, mask sum = 35, frac = 1.121
[Mon Jan 23 07:50:34 2012] Giving source the simple spatial ID 24 for pass 0, mean size = 9.98"
[Mon Jan 23 12:14:47 2012] fullrun_mos1_xmm0109270101_pi300-10000_cl_pass0_src24.ximg exists
[Mon Jan 23 12:14:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109270101_pi300-10000_cl_pass0_src24.csv
[Mon Jan 23 12:14:47 2012] fullrun_mos1_xmm0109270101_pi300-10000_cl_pass0_src24_1.ximg exists
[Mon Jan 23 12:14:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109270101_pi300-10000_cl_pass0_src24.csv
[Mon Jan 23 12:14:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109270101_pi300-10000_cl_pass0_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109270101_pi300-10000_cl_pass0_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 12:14:49 2012] fullrun_mos1_xmm0109270101_pi300-10000_cl_pass0_tfrozen_src24.ximg exists
[Mon Jan 23 12:14:49 2012] fullrun_mos1_xmm0109270101_pi300-10000_cl_pass0_tfrozen_src24_1.ximg exists
[Mon Jan 23 12:14:49 2012] Fit fullrun_mos1_xmm0109270101_pi300-10000_cl_pass0_tfrozen_src24 appears to have run properly
[Mon Jan 23 17:33:01 2012] Warning: source 24 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 39 at 12.956725 pixels away
[Mon Jan 23 17:33:02 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 17:33:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 17:33:02 2012] Assessing source extent using major
[Mon Jan 23 17:33:02 2012] Source does appear to be extended
[Mon Jan 23 17:33:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 24 01:57:42 2012] Using EEF radius (= 9.98 ")to estimate initial spatial extent for simple fitting
[Tue Jan 24 01:57:42 2012] Initial guess for spatial extent in simple fitting = 9.98"
[Tue Jan 24 01:57:42 2012] source mask rpix=2.3, npix_max = 31, mask sum = 35, frac = 1.121
[Tue Jan 24 01:57:42 2012] Giving source the simple spatial ID 22 for pass 1, mean size = 9.98"
[Tue Jan 24 05:38:38 2012] fullrun_mos1_xmm0109270101_pi300-10000_cl_pass1_src22.ximg exists
[Tue Jan 24 05:38:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109270101_pi300-10000_cl_pass1_src22.csv
[Tue Jan 24 05:38:38 2012] fullrun_mos1_xmm0109270101_pi300-10000_cl_pass1_src22_1.ximg exists
[Tue Jan 24 05:38:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109270101_pi300-10000_cl_pass1_src22.csv
[Tue Jan 24 05:38:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109270101_pi300-10000_cl_pass1_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109270101_pi300-10000_cl_pass1_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 24 05:38:39 2012] fullrun_mos1_xmm0109270101_pi300-10000_cl_pass1_tfrozen_src22.ximg exists
[Tue Jan 24 05:38:39 2012] fullrun_mos1_xmm0109270101_pi300-10000_cl_pass1_tfrozen_src22_1.ximg exists
[Tue Jan 24 05:38:39 2012] Fit fullrun_mos1_xmm0109270101_pi300-10000_cl_pass1_tfrozen_src22 appears to have run properly
[Tue Jan 24 09:42:11 2012] Spatial fit model total counts = 1516.000000, observed total counts = 1516.000000
[Tue Jan 24 09:42:11 2012] Offset between fit and detection position for source 39 = 0.054887 pixels
[Tue Jan 24 09:42:11 2012] 1530.199000 total counts/ 676.001000 bgd. counts: snr = 32.853745
Spatial fit parameters:
  Offset between fit and detection position for source 39 = 0.054887 pixels
  Position = (319.9, 202.8) = 0 42 28.04 41 9 58.6
  Extent = 5.0 (4.7-5.3)", rotation angle = 0
  Source counts = 854.2 +/- 39.1
  Background counts = 676.0
  Rate = 0.02 +/- 0.0007
[Tue Jan 24 09:42:12 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 09:42:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 09:42:12 2012] Assessing source extent using major axis lower bound
[Tue Jan 24 09:42:12 2012] Source does appear to be extended
[Tue Jan 24 09:42:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 25 03:12:29 2012] XMMSAS src. selection expression = ellipse(27783.138700, 17595.276780, 299.799609, 299.799609, 0.000000, X, Y)
[Wed Jan 25 03:12:29 2012] Writing source region out to fullrun_mos1_xmm0109270101_pi300-10000_pass1_cl_src39_src.reg
[Wed Jan 25 03:12:29 2012] Extracting stamp from image fullrun_mos1_xmm0109270101_pi300-10000_cl_sm2.00.img.gz, (303, 186) - (337, 220)
[Wed Jan 25 03:12:29 2012] XMMSAS bgd. selection expression = annulus(27783.138700, 17595.276780, 499.666014, 999.332029, X, Y)
[Wed Jan 25 03:12:29 2012] Writing fullrun_mos1_xmm0109270101_pi300-10000_pass1_cl_src39.gif
[Wed Jan 25 03:41:29 2012] Mean detx,y = (6221.56, -5184.58) 
[Wed Jan 25 03:41:30 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jan 25 03:41:44 2012] Binned source spectrum to 10 counts/bin
[Wed Jan 25 03:41:44 2012] Setting source spectrum file to fullrun_mos1_xmm0109270101_pi300-10000_pass1_cl_src39_src_b10.pi.gz
[Wed Jan 25 03:41:44 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0109270101_pi300-10000_pass1_cl_src39_bgd.pi.gz
[Thu Jan 26 08:24:46 2012] Updating aperture counts using extracted products
[Thu Jan 26 08:24:46 2012] Error reading totcts from fullrun_mos1_xmm0109270101_pi300-10000_pass1_cl_src39_src_b10.pi.gz
[Thu Jan 26 08:24:50 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jan 26 08:24:50 2012] Using photon index=1.80, rate=0.0163, arf fullrun_mos1_xmm0109270101_pi300-10000_pass1_cl_src39.arf
[Thu Jan 26 08:24:50 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jan 26 08:24:50 2012] Updating source flux to 2.9e-13