[Mon Jan 23 01:20:01 2012] Detection parameters:
  Position = (267.8, 277.2) = 0 42 48.14 41 15 23.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 7859.4 +/- 108.0
  Background counts = 158.1
  Rate = 0.1 +/- 0.002

[Mon Jan 23 01:20:03 2012] Off-axis axis estimate = 2.70'
[Mon Jan 23 07:50:34 2012] Using EEF radius (= 7.78 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 07:50:34 2012] Initial guess for spatial extent in simple fitting = 7.78"
[Mon Jan 23 07:50:34 2012] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.955
[Mon Jan 23 07:50:34 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 7.78"
[Mon Jan 23 12:14:47 2012] fullrun_mos1_xmm0109270101_pi300-10000_cl_pass0_src4.ximg exists
[Mon Jan 23 12:14:47 2012] fullrun_mos1_xmm0109270101_pi300-10000_cl_pass0_src4_1.ximg exists
[Mon Jan 23 12:14:47 2012] Fit fullrun_mos1_xmm0109270101_pi300-10000_cl_pass0_src4 appears to have run properly
[Mon Jan 23 12:14:49 2012] fullrun_mos1_xmm0109270101_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Mon Jan 23 12:14:49 2012] fullrun_mos1_xmm0109270101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Mon Jan 23 12:14:49 2012] Fit fullrun_mos1_xmm0109270101_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Mon Jan 23 17:33:01 2012] Warning, spatial fit 4 centroid is now closest to src. 7
[Mon Jan 23 17:33:02 2012] Source 3 is offset by -8.482974 and 0.288434 pixels which is larger than
2 X fitted extent = 1.183320 x 1.183320, not incorporating fit results
[Mon Jan 23 17:33:02 2012] Spatial fit model total counts = 2261.680000, observed total counts = 2261.000000
[Mon Jan 23 17:33:02 2012] Offset between fit and detection position for source 3 = 4.286331 pixels
[Mon Jan 23 17:33:02 2012] Warning, changing simple spatial fit ID from 4 to 97
[Mon Jan 23 17:33:02 2012] 2210.466000 total counts/ 1832.660000 bgd. counts: snr = 8.825268
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 4.286331 pixels
  Position = (265.6, 273.5) = 0 42 48.99 41 15 6.2
  Extent = 16.3 (16.2-16.3)", rotation angle = 0
  Source counts = 377.8 +/- 47.0
  Background counts = 1832.7
  Rate = 0.007 +/- 0.0009
[Mon Jan 23 17:33:02 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 17:33:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 17:33:02 2012] Assessing source extent using major axis lower bound
[Mon Jan 23 17:33:02 2012] Source does appear to be extended
[Mon Jan 23 17:33:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan 23 17:33:02 2012] Source is confused with source 91
[Mon Jan 23 17:33:02 2012] Source is confused with source 92
[Tue Jan 24 01:57:42 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jan 24 01:57:42 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jan 24 01:57:42 2012] Initial guess for spatial extent in simple fitting = 16.30"
[Tue Jan 24 01:57:42 2012] source mask rpix=3.7, npix_max = 72, mask sum = 75, frac = 1.039
[Tue Jan 24 01:57:42 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 16.30"
[Tue Jan 24 05:38:37 2012] fullrun_mos1_xmm0109270101_pi300-10000_cl_pass1_src4.ximg exists
[Tue Jan 24 05:38:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109270101_pi300-10000_cl_pass1_src4.csv
[Tue Jan 24 05:38:37 2012] fullrun_mos1_xmm0109270101_pi300-10000_cl_pass1_src4_1.ximg exists
[Tue Jan 24 05:38:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109270101_pi300-10000_cl_pass1_src4.csv
[Tue Jan 24 05:38:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109270101_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109270101_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 24 05:38:39 2012] fullrun_mos1_xmm0109270101_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Tue Jan 24 05:38:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109270101_pi300-10000_cl_pass1_tfrozen_src4.csv
[Tue Jan 24 05:38:39 2012] fullrun_mos1_xmm0109270101_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Tue Jan 24 05:38:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109270101_pi300-10000_cl_pass1_tfrozen_src4.csv
[Tue Jan 24 05:38:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109270101_pi300-10000_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109270101_pi300-10000_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 24 09:42:11 2012] Warning, spatial fit 4 centroid is now closest to src. 52
[Tue Jan 24 09:42:12 2012] Spatial fit model total counts = 2219.470000, observed total counts = 2218.000000
[Tue Jan 24 09:42:12 2012] Offset between fit and detection position for source 3 = 2.084027 pixels
[Tue Jan 24 09:42:12 2012] Warning, changing simple spatial fit ID from 4 to 74
[Tue Jan 24 09:42:12 2012] 2265.524000 total counts/ 1952.600000 bgd. counts: snr = 7.081614
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 2.084027 pixels
  Position = (265.6, 275.6) = 0 42 48.98 41 15 15.3
  Extent = 16.6 (16.5-33.1)", rotation angle = 0
  Source counts = 312.9 +/- 47.6
  Background counts = 1952.6
  Rate = 0.006 +/- 0.0009
[Tue Jan 24 09:42:12 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 09:42:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 09:42:12 2012] Assessing source extent using major axis lower bound
[Tue Jan 24 09:42:12 2012] Source does appear to be extended
[Tue Jan 24 09:42:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 25 03:12:28 2012] XMMSAS src. selection expression = ellipse(23058.222000, 23929.614000, 993.174029, 993.174029, 0.000000, X, Y)
[Wed Jan 25 03:12:28 2012] Writing source region out to fullrun_mos1_xmm0109270101_pi300-10000_pass1_cl_src3_src.reg
[Wed Jan 25 03:12:28 2012] Extracting stamp from image fullrun_mos1_xmm0109270101_pi300-10000_cl_sm2.00.img.gz, (209, 219) - (323, 333)
[Wed Jan 25 03:12:28 2012] XMMSAS bgd. selection expression = annulus(23058.222000, 23929.614000, 1655.290048, 3310.580095, X, Y) && !ellipse(25452.465140, 24868.198600, 1295.577637, 1268.961637, 90.000000, X, Y) && !ellipse(23534.728000, 25320.196000, 475.852814, 475.852814, 0.000000, X, Y) && !ellipse(21772.268180, 24870.694600, 367.389611, 367.389611, 0.000000, X, Y) && !ellipse(24093.924000, 25010.504000, 1152.408033, 468.993613, 41.401000, X, Y) && !ellipse(22316.508900, 24393.209600, 336.264810, 303.522409, 201.400000, X, Y) && !ellipse(19759.252200, 27289.851800, 393.276811, 393.276811, 0.000000, X, Y) && !ellipse(26907.189392, 21461.757492, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20656.645930, 24918.718600, 378.761611, 378.761611, 0.000000, X, Y) && !ellipse(24596.654000, 24603.898000, 1161.272033, 1161.272033, 0.000000, X, Y) && !ellipse(19952.969840, 24089.530000, 417.838412, 417.838412, 0.000000, X, Y) && !ellipse(23960.483940, 26445.112600, 323.214409, 323.214409, 0.000000, X, Y) && !ellipse(24612.604800, 23306.759600, 341.010410, 341.010410, 0.000000, X, Y) && !ellipse(26510.684662, 25181.149536, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24126.805542, 19926.838593, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21017.502060, 24211.485046, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21812.910000, 27830.144000, 1295.288037, 1295.288037, 0.000000, X, Y) && !ellipse(23051.886000, 27523.662400, 354.139210, 354.139210, 0.000000, X, Y) && !ellipse(25261.918000, 22948.122000, 328.924809, 328.924809, 0.000000, X, Y) && !ellipse(24386.856780, 21595.266400, 386.473611, 386.473611, 0.000000, X, Y) && !ellipse(19675.535800, 24826.832800, 312.641609, 312.641609, 0.000000, X, Y) && !ellipse(24000.368000, 22532.766600, 349.082410, 349.082410, 0.000000, X, Y) && !ellipse(24973.449400, 21731.310000, 329.228809, 195.058406, 126.143500, X, Y) && !ellipse(22797.996000, 25245.994000, 2381.496069, 2381.496069, 0.000000, X, Y) && !ellipse(23512.941528, 19942.617432, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22441.767303, 23158.447327, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22101.521317, 27123.627380, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25876.684906, 22215.597305, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21582.076000, 27083.106000, 2554.560074, 2554.560074, 0.000000, X, Y) && !ellipse(22526.744171, 27023.004425, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22021.478000, 26462.376000, 1266.248036, 1266.248036, 0.000000, X, Y) && !ellipse(20338.028290, 22182.235535, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22853.870331, 23017.380310, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jan 25 03:12:28 2012] Writing fullrun_mos1_xmm0109270101_pi300-10000_pass1_cl_src3.gif
[Wed Jan 25 03:18:07 2012] Mean detx,y = (1000.03, 971.33) 
[Wed Jan 25 03:18:08 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jan 25 03:18:24 2012] Binned source spectrum to 10 counts/bin
[Wed Jan 25 03:18:24 2012] Setting source spectrum file to fullrun_mos1_xmm0109270101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed Jan 25 03:18:24 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0109270101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Thu Jan 26 08:24:46 2012] Updating aperture counts using extracted products
[Thu Jan 26 08:24:46 2012] Error reading totcts from fullrun_mos1_xmm0109270101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Thu Jan 26 08:24:49 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jan 26 08:24:49 2012] Using photon index=1.80, rate=0.00596, arf fullrun_mos1_xmm0109270101_pi300-10000_pass1_cl_src3.arf
[Thu Jan 26 08:24:49 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jan 26 08:24:49 2012] Updating source flux to 5.6e-14
[Thu Jan 26 08:25:00 2012] Flag b found in src. 3 procflags, skipping spectral fitting
[Thu Jan 26 08:25:00 2012] Flag c found in src. 3 procflags, skipping spectral fitting