[Mon Jan 23 01:20:02 2012] Detection parameters:
  Position = (229.8, 279.0) = 0 43 2.78 41 15 22.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1644.9 +/- 59.1
  Background counts = 102.5
  Rate = 0.04 +/- 0.001

[Mon Jan 23 01:20:03 2012] Off-axis axis estimate = 5.17'
[Mon Jan 23 07:50:34 2012] Using EEF radius (= 9.01 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 07:50:34 2012] Initial guess for spatial extent in simple fitting = 9.01"
[Mon Jan 23 07:50:34 2012] source mask rpix=2.1, npix_max = 26, mask sum = 20, frac = 0.756
[Mon Jan 23 07:50:34 2012] Giving source the simple spatial ID 23 for pass 0, mean size = 9.01"
[Mon Jan 23 12:14:47 2012] fullrun_mos1_xmm0109270101_pi300-10000_cl_pass0_src23.ximg exists
[Mon Jan 23 12:14:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109270101_pi300-10000_cl_pass0_src23.csv
[Mon Jan 23 12:14:47 2012] fullrun_mos1_xmm0109270101_pi300-10000_cl_pass0_src23_1.ximg exists
[Mon Jan 23 12:14:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109270101_pi300-10000_cl_pass0_src23.csv
[Mon Jan 23 12:14:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109270101_pi300-10000_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109270101_pi300-10000_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 12:14:49 2012] fullrun_mos1_xmm0109270101_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Mon Jan 23 12:14:49 2012] fullrun_mos1_xmm0109270101_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Mon Jan 23 12:14:49 2012] Fit fullrun_mos1_xmm0109270101_pi300-10000_cl_pass0_tfrozen_src23 appears to have run properly
[Mon Jan 23 17:33:01 2012] Spatial fit model total counts = 3248.710000, observed total counts = 3248.000000
[Mon Jan 23 17:33:01 2012] Offset between fit and detection position for source 26 = 1.576309 pixels
[Mon Jan 23 17:33:01 2012] 3259.752000 total counts/ 2476.310000 bgd. counts: snr = 15.743611
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 1.576309 pixels
  Position = (229.9, 277.4) = 0 43 2.75 41 15 23.1
  Extent = 5.2 (4.9-5.6)", rotation angle = 0
  Source counts = 783.4 +/- 57.1
  Background counts = 2476.3
  Rate = 0.01 +/- 0.001
[Mon Jan 23 17:33:02 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 17:33:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 17:33:02 2012] Assessing source extent using major axis lower bound
[Mon Jan 23 17:33:02 2012] Source does appear to be extended
[Mon Jan 23 17:33:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 24 01:57:42 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jan 24 01:57:42 2012] Initial guess for spatial extent in simple fitting = 5.22"
[Tue Jan 24 01:57:42 2012] source mask rpix=1.2, npix_max = 11, mask sum = 4, frac = 0.346
[Tue Jan 24 01:57:42 2012] Skipping simple spatial due to low active detector fraction
[Tue Jan 24 09:42:12 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 09:42:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 09:42:12 2012] Assessing source extent using major axis lower bound
[Tue Jan 24 09:42:12 2012] Source does appear to be extended
[Tue Jan 24 09:42:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 25 03:12:29 2012] XMMSAS src. selection expression = ellipse(19952.969840, 24089.530000, 313.378809, 313.378809, 0.000000, X, Y)
[Wed Jan 25 03:12:29 2012] Writing source region out to fullrun_mos1_xmm0109270101_pi300-10000_pass1_cl_src26_src.reg
[Wed Jan 25 03:12:29 2012] Extracting stamp from image fullrun_mos1_xmm0109270101_pi300-10000_cl_sm2.00.img.gz, (212, 259) - (248, 295)
[Wed Jan 25 03:12:29 2012] XMMSAS bgd. selection expression = annulus(19952.969840, 24089.530000, 522.298015, 1044.596030, X, Y) && !ellipse(20656.645930, 24918.718600, 378.761611, 378.761611, 0.000000, X, Y) && !ellipse(21017.502060, 24211.485046, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19675.535800, 24826.832800, 312.641609, 312.641609, 0.000000, X, Y) && !ellipse(22797.996000, 25245.994000, 2381.496069, 2381.496069, 0.000000, X, Y) && !ellipse(21582.076000, 27083.106000, 2554.560074, 2554.560074, 0.000000, X, Y) && !ellipse(20338.028290, 22182.235535, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jan 25 03:12:29 2012] Writing fullrun_mos1_xmm0109270101_pi300-10000_pass1_cl_src26.gif
[Wed Jan 25 03:41:13 2012] Mean detx,y = (1805.13, 3982.55) 
[Wed Jan 25 03:41:14 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jan 25 03:41:23 2012] Binned source spectrum to 10 counts/bin
[Wed Jan 25 03:41:23 2012] Setting source spectrum file to fullrun_mos1_xmm0109270101_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Wed Jan 25 03:41:23 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0109270101_pi300-10000_pass1_cl_src26_bgd.pi.gz
[Thu Jan 26 08:24:46 2012] Updating aperture counts using extracted products
[Thu Jan 26 08:24:46 2012] Error reading totcts from fullrun_mos1_xmm0109270101_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Thu Jan 26 08:24:50 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jan 26 08:24:50 2012] Using photon index=1.80, rate=0.0149, arf fullrun_mos1_xmm0109270101_pi300-10000_pass1_cl_src26.arf
[Thu Jan 26 08:24:50 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jan 26 08:24:50 2012] Updating source flux to 1.9e-13