[Mon Jan 23 01:20:02 2012] Detection parameters:
  Position = (238.1, 287.0) = 0 42 59.60 41 16 5.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3138.9 +/- 69.9
  Background counts = 125.4
  Rate = 0.06 +/- 0.001

[Mon Jan 23 01:20:03 2012] Off-axis axis estimate = 4.45'
[Mon Jan 23 07:50:34 2012] Using EEF radius (= 8.66 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 07:50:34 2012] Initial guess for spatial extent in simple fitting = 8.66"
[Mon Jan 23 07:50:34 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.008
[Mon Jan 23 07:50:34 2012] Giving source the simple spatial ID 17 for pass 0, mean size = 8.66"
[Mon Jan 23 12:14:47 2012] fullrun_mos1_xmm0109270101_pi300-10000_cl_pass0_src17.ximg exists
[Mon Jan 23 12:14:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109270101_pi300-10000_cl_pass0_src17.csv
[Mon Jan 23 12:14:47 2012] fullrun_mos1_xmm0109270101_pi300-10000_cl_pass0_src17_1.ximg exists
[Mon Jan 23 12:14:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109270101_pi300-10000_cl_pass0_src17.csv
[Mon Jan 23 12:14:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109270101_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109270101_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 12:14:49 2012] fullrun_mos1_xmm0109270101_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Mon Jan 23 12:14:49 2012] fullrun_mos1_xmm0109270101_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Mon Jan 23 12:14:49 2012] Fit fullrun_mos1_xmm0109270101_pi300-10000_cl_pass0_tfrozen_src17 appears to have run properly
[Mon Jan 23 17:33:01 2012] Spatial fit model total counts = 4571.680000, observed total counts = 4573.000000
[Mon Jan 23 17:33:01 2012] Offset between fit and detection position for source 25 = 0.090877 pixels
[Mon Jan 23 17:33:01 2012] 4559.190000 total counts/ 2680.560000 bgd. counts: snr = 36.285114
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 0.090877 pixels
  Position = (238.0, 287.0) = 0 42 59.63 41 16 4.6
  Extent = 4.7 (4.5-4.8)", rotation angle = 0
  Source counts = 1878.6 +/- 67.5
  Background counts = 2680.6
  Rate = 0.04 +/- 0.001
[Mon Jan 23 17:33:02 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 17:33:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 17:33:02 2012] Assessing source extent using major axis lower bound
[Mon Jan 23 17:33:02 2012] Source does appear to be extended
[Mon Jan 23 17:33:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 24 01:57:42 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jan 24 01:57:42 2012] Initial guess for spatial extent in simple fitting = 4.66"
[Tue Jan 24 01:57:42 2012] source mask rpix=1.1, npix_max = 9, mask sum = 16, frac = 1.621
[Tue Jan 24 01:57:42 2012] Giving source the simple spatial ID 17 for pass 1, mean size = 4.66"
[Tue Jan 24 05:38:38 2012] fullrun_mos1_xmm0109270101_pi300-10000_cl_pass1_src17.ximg exists
[Tue Jan 24 05:38:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109270101_pi300-10000_cl_pass1_src17.csv
[Tue Jan 24 05:38:38 2012] fullrun_mos1_xmm0109270101_pi300-10000_cl_pass1_src17_1.ximg exists
[Tue Jan 24 05:38:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109270101_pi300-10000_cl_pass1_src17.csv
[Tue Jan 24 05:38:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109270101_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109270101_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 24 05:38:39 2012] fullrun_mos1_xmm0109270101_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Tue Jan 24 05:38:39 2012] fullrun_mos1_xmm0109270101_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Tue Jan 24 05:38:39 2012] Fit fullrun_mos1_xmm0109270101_pi300-10000_cl_pass1_tfrozen_src17 appears to have run properly
[Tue Jan 24 09:42:11 2012] Spatial fit model total counts = 4367.090000, observed total counts = 4370.000000
[Tue Jan 24 09:42:11 2012] Offset between fit and detection position for source 25 = 0.006564 pixels
[Tue Jan 24 09:42:11 2012] 4376.300000 total counts/ 2470.830000 bgd. counts: snr = 38.333695
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 0.006564 pixels
  Position = (238.0, 287.0) = 0 42 59.63 41 16 4.6
  Extent = 4.7 (4.6-4.9)", rotation angle = 0
  Source counts = 1905.5 +/- 66.2
  Background counts = 2470.8
  Rate = 0.04 +/- 0.001
[Tue Jan 24 09:42:12 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 09:42:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 09:42:12 2012] Assessing source extent using major axis lower bound
[Tue Jan 24 09:42:12 2012] Source does appear to be extended
[Tue Jan 24 09:42:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 25 03:12:29 2012] Counts = 1905.470000, rescaling region sizes by 2.000000
[Wed Jan 25 03:12:29 2012] XMMSAS src. selection expression = ellipse(20656.645930, 24918.718600, 568.142416, 568.142416, 0.000000, X, Y)
[Wed Jan 25 03:12:29 2012] Writing source region out to fullrun_mos1_xmm0109270101_pi300-10000_pass1_cl_src25_src.reg
[Wed Jan 25 03:12:29 2012] Extracting stamp from image fullrun_mos1_xmm0109270101_pi300-10000_cl_sm2.00.img.gz, (205, 254) - (271, 320)
[Wed Jan 25 03:12:29 2012] XMMSAS bgd. selection expression = annulus(20656.645930, 24918.718600, 1893.808054, 3787.616109, X, Y) && !ellipse(25452.465140, 24868.198600, 1295.577637, 1268.961637, 90.000000, X, Y) && !ellipse(23534.728000, 25320.196000, 475.852814, 475.852814, 0.000000, X, Y) && !ellipse(23058.222000, 23929.614000, 1324.232038, 1324.232038, 0.000000, X, Y) && !ellipse(18230.413820, 23453.463600, 365.748811, 365.748811, 0.000000, X, Y) && !ellipse(22320.995800, 28288.973800, 400.159212, 400.159212, 0.000000, X, Y) && !ellipse(21772.268180, 24870.694600, 367.389611, 367.389611, 0.000000, X, Y) && !ellipse(24093.924000, 25010.504000, 1152.408033, 468.993613, 41.401000, X, Y) && !ellipse(22316.508900, 24393.209600, 336.264810, 303.522409, 201.400000, X, Y) && !ellipse(19759.252200, 27289.851800, 393.276811, 393.276811, 0.000000, X, Y) && !ellipse(24596.654000, 24603.898000, 1161.272033, 1161.272033, 0.000000, X, Y) && !ellipse(20710.960000, 28791.214600, 398.163211, 398.163211, 0.000000, X, Y) && !ellipse(19952.969840, 24089.530000, 417.838412, 417.838412, 0.000000, X, Y) && !ellipse(23960.483940, 26445.112600, 323.214409, 323.214409, 0.000000, X, Y) && !ellipse(24612.604800, 23306.759600, 341.010410, 341.010410, 0.000000, X, Y) && !ellipse(21017.502060, 24211.485046, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21812.910000, 27830.144000, 1295.288037, 1295.288037, 0.000000, X, Y) && !ellipse(23051.886000, 27523.662400, 354.139210, 354.139210, 0.000000, X, Y) && !ellipse(18669.995514, 20997.633148, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24386.856780, 21595.266400, 386.473611, 386.473611, 0.000000, X, Y) && !ellipse(19675.535800, 24826.832800, 312.641609, 312.641609, 0.000000, X, Y) && !ellipse(24000.368000, 22532.766600, 349.082410, 349.082410, 0.000000, X, Y) && !ellipse(17059.681247, 28005.024411, 529.673615, 527.198959, -0.000000, X, Y) && !ellipse(22797.996000, 25245.994000, 2381.496069, 2381.496069, 0.000000, X, Y) && !ellipse(22441.767303, 23158.447327, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22101.521317, 27123.627380, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21582.076000, 27083.106000, 2554.560074, 2554.560074, 0.000000, X, Y) && !ellipse(22526.744171, 27023.004425, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22021.478000, 26462.376000, 1266.248036, 1266.248036, 0.000000, X, Y) && !ellipse(15232.210000, 29035.804000, 1797.688052, 1797.688052, 0.000000, X, Y) && !ellipse(20338.028290, 22182.235535, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22853.870331, 23017.380310, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jan 25 03:12:29 2012] Writing fullrun_mos1_xmm0109270101_pi300-10000_pass1_cl_src25.gif
[Wed Jan 25 03:33:27 2012] Mean detx,y = (836.46, 3483.73) 
[Wed Jan 25 03:33:28 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jan 25 03:33:56 2012] Binned source spectrum to 10 counts/bin
[Wed Jan 25 03:33:56 2012] Setting source spectrum file to fullrun_mos1_xmm0109270101_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Wed Jan 25 03:33:56 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0109270101_pi300-10000_pass1_cl_src25_bgd.pi.gz
[Thu Jan 26 08:24:46 2012] Updating aperture counts using extracted products
[Thu Jan 26 08:24:46 2012] Error reading totcts from fullrun_mos1_xmm0109270101_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Thu Jan 26 08:24:50 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jan 26 08:24:50 2012] Using photon index=1.80, rate=0.0363, arf fullrun_mos1_xmm0109270101_pi300-10000_pass1_cl_src25.arf
[Thu Jan 26 08:24:50 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jan 26 08:24:50 2012] Updating source flux to 3.8e-13