[Mon Jan 23 01:20:02 2012] Detection parameters:
  Position = (337.6, 285.7) = 0 42 21.19 41 15 59.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1449.8 +/- 51.0
  Background counts = 95.1
  Rate = 0.03 +/- 0.001

[Mon Jan 23 01:20:03 2012] Off-axis axis estimate = 2.99'
[Mon Jan 23 07:50:34 2012] Using EEF radius (= 7.92 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 07:50:34 2012] Initial guess for spatial extent in simple fitting = 7.92"
[Mon Jan 23 07:50:34 2012] source mask rpix=1.8, npix_max = 21, mask sum = 25, frac = 1.160
[Mon Jan 23 07:50:34 2012] Giving source the simple spatial ID 28 for pass 0, mean size = 7.92"
[Mon Jan 23 12:14:47 2012] fullrun_mos1_xmm0109270101_pi300-10000_cl_pass0_src28.ximg exists
[Mon Jan 23 12:14:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109270101_pi300-10000_cl_pass0_src28.csv
[Mon Jan 23 12:14:47 2012] fullrun_mos1_xmm0109270101_pi300-10000_cl_pass0_src28_1.ximg exists
[Mon Jan 23 12:14:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109270101_pi300-10000_cl_pass0_src28.csv
[Mon Jan 23 12:14:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109270101_pi300-10000_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109270101_pi300-10000_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 12:14:49 2012] fullrun_mos1_xmm0109270101_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Mon Jan 23 12:14:49 2012] fullrun_mos1_xmm0109270101_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Mon Jan 23 12:14:49 2012] Fit fullrun_mos1_xmm0109270101_pi300-10000_cl_pass0_tfrozen_src28 appears to have run properly
[Mon Jan 23 17:33:02 2012] Warning, spatial fit 28 centroid is now closest to src. 1
[Mon Jan 23 17:33:02 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 17:33:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 17:33:02 2012] Assessing source extent using major
[Mon Jan 23 17:33:02 2012] Source does appear to be extended
[Mon Jan 23 17:33:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan 23 17:33:02 2012] Source is confused with source 1
[Tue Jan 24 01:57:42 2012] Using EEF radius (= 7.92 ")to estimate initial spatial extent for simple fitting
[Tue Jan 24 01:57:42 2012] Initial guess for spatial extent in simple fitting = 7.92"
[Tue Jan 24 01:57:42 2012] source mask rpix=1.8, npix_max = 21, mask sum = 25, frac = 1.160
[Tue Jan 24 01:57:42 2012] Giving source the simple spatial ID 26 for pass 1, mean size = 7.92"
[Tue Jan 24 05:38:38 2012] fullrun_mos1_xmm0109270101_pi300-10000_cl_pass1_src26.ximg exists
[Tue Jan 24 05:38:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109270101_pi300-10000_cl_pass1_src26.csv
[Tue Jan 24 05:38:38 2012] fullrun_mos1_xmm0109270101_pi300-10000_cl_pass1_src26_1.ximg exists
[Tue Jan 24 05:38:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109270101_pi300-10000_cl_pass1_src26.csv
[Tue Jan 24 05:38:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109270101_pi300-10000_cl_pass1_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109270101_pi300-10000_cl_pass1_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 24 05:38:39 2012] fullrun_mos1_xmm0109270101_pi300-10000_cl_pass1_tfrozen_src26.ximg exists
[Tue Jan 24 05:38:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109270101_pi300-10000_cl_pass1_tfrozen_src26.csv
[Tue Jan 24 05:38:39 2012] fullrun_mos1_xmm0109270101_pi300-10000_cl_pass1_tfrozen_src26_1.ximg exists
[Tue Jan 24 05:38:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109270101_pi300-10000_cl_pass1_tfrozen_src26.csv
[Tue Jan 24 05:38:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109270101_pi300-10000_cl_pass1_tfrozen_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109270101_pi300-10000_cl_pass1_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 24 09:42:11 2012] Source 24 is offset by 3.928111 and 5.789316 pixels which is larger than
2 X fitted extent = 1.756124 x 1.756124, not incorporating fit results
[Tue Jan 24 09:42:12 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 09:42:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 09:42:12 2012] Assessing source extent using major
[Tue Jan 24 09:42:12 2012] Source does appear to be extended
[Tue Jan 24 09:42:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 25 03:12:29 2012] Counts = 1449.762573, rescaling region sizes by 2.000000
[Wed Jan 25 03:12:29 2012] XMMSAS src. selection expression = ellipse(29324.107697, 24808.906464, 1305.000000, 1305.000000, 0.000000, X, Y)
[Wed Jan 25 03:12:29 2012] Writing source region out to fullrun_mos1_xmm0109270101_pi300-10000_pass1_cl_src24_src.reg
[Wed Jan 25 03:12:29 2012] Extracting stamp from image fullrun_mos1_xmm0109270101_pi300-10000_cl_sm2.00.img.gz, (263, 211) - (413, 361)
[Wed Jan 25 03:12:30 2012] XMMSAS bgd. selection expression = annulus(29324.107697, 24808.906464, 4350.000000, 8700.000000, X, Y) && !ellipse(25452.465140, 24868.198600, 1295.577637, 1268.961637, 90.000000, X, Y) && !ellipse(28976.528200, 24298.974260, 397.484811, 397.484811, 0.000000, X, Y) && !ellipse(23534.728000, 25320.196000, 475.852814, 475.852814, 0.000000, X, Y) && !ellipse(23058.222000, 23929.614000, 1324.232038, 1324.232038, 0.000000, X, Y) && !ellipse(22320.995800, 28288.973800, 400.159212, 400.159212, 0.000000, X, Y) && !ellipse(31185.438756, 27920.305400, 432.920812, 432.920812, 0.000000, X, Y) && !ellipse(21772.268180, 24870.694600, 367.389611, 367.389611, 0.000000, X, Y) && !ellipse(27767.742179, 20460.769600, 454.018413, 402.854412, 146.766600, X, Y) && !ellipse(27132.585800, 25226.709400, 415.004012, 415.004012, 0.000000, X, Y) && !ellipse(24093.924000, 25010.504000, 1152.408033, 468.993613, 41.401000, X, Y) && !ellipse(22316.508900, 24393.209600, 336.264810, 303.522409, 201.400000, X, Y) && !ellipse(29955.063260, 22430.436400, 423.832812, 381.336011, 290.569500, X, Y) && !ellipse(26907.189392, 21461.757492, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20656.645930, 24918.718600, 378.761611, 378.761611, 0.000000, X, Y) && !ellipse(24596.654000, 24603.898000, 1161.272033, 1161.272033, 0.000000, X, Y) && !ellipse(20710.960000, 28791.214600, 398.163211, 398.163211, 0.000000, X, Y) && !ellipse(32412.606000, 27499.648000, 409.639212, 409.639212, 0.000000, X, Y) && !ellipse(27783.138700, 17595.276780, 399.732812, 399.732812, 0.000000, X, Y) && !ellipse(29107.744260, 21893.081600, 314.949609, 314.949609, 0.000000, X, Y) && !ellipse(24030.602000, 19562.362000, 337.969610, 337.969610, 0.000000, X, Y) && !ellipse(21099.273560, 18931.724000, 668.261619, 668.261619, 0.000000, X, Y) && !ellipse(27112.976200, 29175.128800, 383.154411, 383.154411, 0.000000, X, Y) && !ellipse(23960.483940, 26445.112600, 323.214409, 323.214409, 0.000000, X, Y) && !ellipse(24612.604800, 23306.759600, 341.010410, 341.010410, 0.000000, X, Y) && !ellipse(28276.567000, 28691.091800, 381.789611, 381.789611, 0.000000, X, Y) && !ellipse(32857.943726, 21801.147232, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26510.684662, 25181.149536, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32134.687195, 30578.324951, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26219.996760, 29706.571200, 418.304012, 418.304012, 0.000000, X, Y) && !ellipse(24126.805542, 19926.838593, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29292.138489, 22763.984314, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21017.502060, 24211.485046, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30613.390200, 26410.306000, 363.573610, 363.573610, 0.000000, X, Y) && !ellipse(21812.910000, 27830.144000, 1295.288037, 1295.288037, 0.000000, X, Y) && !ellipse(23051.886000, 27523.662400, 354.139210, 354.139210, 0.000000, X, Y) && !ellipse(25261.918000, 22948.122000, 328.924809, 328.924809, 0.000000, X, Y) && !ellipse(24386.856780, 21595.266400, 386.473611, 386.473611, 0.000000, X, Y) && !ellipse(25085.561200, 28108.038400, 348.684010, 348.684010, 0.000000, X, Y) && !ellipse(24000.368000, 22532.766600, 349.082410, 349.082410, 0.000000, X, Y) && !ellipse(31432.657623, 27192.870544, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20968.241974, 18570.198273, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28501.672546, 22082.190048, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30672.521760, 30252.844200, 402.973612, 402.973612, 0.000000, X, Y) && !ellipse(32011.047791, 26911.971100, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24973.449400, 21731.310000, 329.228809, 195.058406, 126.143500, X, Y) && !ellipse(24759.323980, 30909.603400, 327.780809, 327.780809, 0.000000, X, Y) && !ellipse(31880.314430, 23796.698000, 443.914413, 443.914413, 0.000000, X, Y) && !ellipse(22797.996000, 25245.994000, 2381.496069, 2381.496069, 0.000000, X, Y) && !ellipse(37900.290405, 31194.533356, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23512.941528, 19942.617432, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29799.454960, 20482.263400, 402.132012, 402.132012, 0.000000, X, Y) && !ellipse(36076.444580, 23193.007843, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22441.767303, 23158.447327, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22101.521317, 27123.627380, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31698.805725, 20980.990097, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19958.134750, 30462.257690, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38354.474803, 28790.653033, 446.137240, 272.140150, 76.927175, X, Y) && !ellipse(25876.684906, 22215.597305, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21582.076000, 27083.106000, 2554.560074, 2554.560074, 0.000000, X, Y) && !ellipse(22526.744171, 27023.004425, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22021.478000, 26462.376000, 1266.248036, 1266.248036, 0.000000, X, Y) && !ellipse(20338.028290, 22182.235535, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22853.870331, 23017.380310, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32448.726715, 18161.047638, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jan 25 03:12:30 2012] Writing fullrun_mos1_xmm0109270101_pi300-10000_pass1_cl_src24.gif
[Wed Jan 25 03:43:04 2012] Mean detx,y = (-756.14, -4770.69) 
[Wed Jan 25 03:43:06 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jan 25 03:45:08 2012] Binned source spectrum to 10 counts/bin
[Wed Jan 25 03:45:08 2012] Setting source spectrum file to fullrun_mos1_xmm0109270101_pi300-10000_pass1_cl_src24_src_b10.pi.gz
[Wed Jan 25 03:45:08 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0109270101_pi300-10000_pass1_cl_src24_bgd.pi.gz
[Wed Jan 25 06:06:15 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jan 25 06:06:15 2012] rmf not generated due to insufficient counts
[Thu Jan 26 08:24:47 2012] Updating aperture counts using extracted products
[Thu Jan 26 08:24:47 2012] Error reading totcts from fullrun_mos1_xmm0109270101_pi300-10000_pass1_cl_src24_src_b10.pi.gz
[Thu Jan 26 08:24:50 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jan 26 08:24:50 2012] Using photon index=1.80, rate=0.0339, arf fullrun_mos1_xmm0109270101_pi300-10000_pass1_cl_src24.arf
[Thu Jan 26 08:24:50 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jan 26 08:24:50 2012] Updating source flux to 3.6e-13
[Thu Jan 26 08:25:00 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting