[Mon Jan 23 01:20:02 2012] Detection parameters:
  Position = (238.7, 331.7) = 0 42 59.36 41 19 18.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2555.3 +/- 63.2
  Background counts = 103.2
  Rate = 0.05 +/- 0.001

[Mon Jan 23 01:20:03 2012] Off-axis axis estimate = 4.95'
[Mon Jan 23 07:50:34 2012] Using EEF radius (= 8.90 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 07:50:34 2012] Initial guess for spatial extent in simple fitting = 8.90"
[Mon Jan 23 07:50:34 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.963
[Mon Jan 23 07:50:34 2012] Giving source the simple spatial ID 21 for pass 0, mean size = 8.90"
[Mon Jan 23 12:14:47 2012] fullrun_mos1_xmm0109270101_pi300-10000_cl_pass0_src21.ximg exists
[Mon Jan 23 12:14:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109270101_pi300-10000_cl_pass0_src21.csv
[Mon Jan 23 12:14:47 2012] fullrun_mos1_xmm0109270101_pi300-10000_cl_pass0_src21_1.ximg exists
[Mon Jan 23 12:14:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109270101_pi300-10000_cl_pass0_src21.csv
[Mon Jan 23 12:14:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109270101_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109270101_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 12:14:49 2012] fullrun_mos1_xmm0109270101_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Mon Jan 23 12:14:49 2012] fullrun_mos1_xmm0109270101_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Mon Jan 23 12:14:49 2012] Fit fullrun_mos1_xmm0109270101_pi300-10000_cl_pass0_tfrozen_src21 appears to have run properly
[Mon Jan 23 17:33:01 2012] Source 18 is offset by 2.430785 and 9.342329 pixels which is larger than
2 X fitted extent = 1.039816 x 1.039816, not incorporating fit results
[Mon Jan 23 17:33:01 2012] Spatial fit model total counts = 3117.560000, observed total counts = 3112.000000
[Mon Jan 23 17:33:01 2012] Offset between fit and detection position for source 18 = 0.219008 pixels
[Mon Jan 23 17:33:01 2012] 3115.360000 total counts/ 1485.930000 bgd. counts: snr = 42.270417
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.219008 pixels
  Position = (238.6, 331.5) = 0 42 59.41 41 19 18.2
  Extent = 4.9 (4.7-5.2)", rotation angle = 0
  Source counts = 1629.4 +/- 55.8
  Background counts = 1485.9
  Rate = 0.03 +/- 0.001
[Mon Jan 23 17:33:02 2012] Vigneting correction estimate = 1.000000
[Mon Jan 23 17:33:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 23 17:33:02 2012] Assessing source extent using major axis lower bound
[Mon Jan 23 17:33:02 2012] Source does appear to be extended
[Mon Jan 23 17:33:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 24 01:57:42 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jan 24 01:57:42 2012] Initial guess for spatial extent in simple fitting = 4.92"
[Tue Jan 24 01:57:42 2012] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.846
[Tue Jan 24 01:57:42 2012] Giving source the simple spatial ID 20 for pass 1, mean size = 4.92"
[Tue Jan 24 05:38:38 2012] fullrun_mos1_xmm0109270101_pi300-10000_cl_pass1_src20.ximg exists
[Tue Jan 24 05:38:38 2012] fullrun_mos1_xmm0109270101_pi300-10000_cl_pass1_src20_1.ximg exists
[Tue Jan 24 05:38:38 2012] Fit fullrun_mos1_xmm0109270101_pi300-10000_cl_pass1_src20 appears to have run properly
[Tue Jan 24 05:38:39 2012] fullrun_mos1_xmm0109270101_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Tue Jan 24 05:38:39 2012] fullrun_mos1_xmm0109270101_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Tue Jan 24 05:38:39 2012] Fit fullrun_mos1_xmm0109270101_pi300-10000_cl_pass1_tfrozen_src20 appears to have run properly
[Tue Jan 24 09:42:11 2012] Spatial fit model total counts = 3123.250000, observed total counts = 3120.000000
[Tue Jan 24 09:42:11 2012] Offset between fit and detection position for source 18 = 0.005159 pixels
[Tue Jan 24 09:42:11 2012] 3118.910000 total counts/ 1481.220000 bgd. counts: snr = 42.552190
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.005159 pixels
  Position = (238.6, 331.5) = 0 42 59.41 41 19 18.2
  Extent = 5.0 (4.7-5.2)", rotation angle = 0
  Source counts = 1637.7 +/- 55.8
  Background counts = 1481.2
  Rate = 0.03 +/- 0.001
[Tue Jan 24 09:42:12 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 09:42:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 09:42:12 2012] Assessing source extent using major axis lower bound
[Tue Jan 24 09:42:12 2012] Source does appear to be extended
[Tue Jan 24 09:42:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 25 03:12:29 2012] Counts = 1637.690000, rescaling region sizes by 2.000000
[Wed Jan 25 03:12:29 2012] XMMSAS src. selection expression = ellipse(20710.960000, 28791.214600, 597.244817, 597.244817, 0.000000, X, Y)
[Wed Jan 25 03:12:29 2012] Writing source region out to fullrun_mos1_xmm0109270101_pi300-10000_pass1_cl_src18_src.reg
[Wed Jan 25 03:12:29 2012] Extracting stamp from image fullrun_mos1_xmm0109270101_pi300-10000_cl_sm2.00.img.gz, (204, 297) - (273, 366)
[Wed Jan 25 03:12:29 2012] XMMSAS bgd. selection expression = annulus(20710.960000, 28791.214600, 1990.816057, 3981.632115, X, Y) && !ellipse(25452.465140, 24868.198600, 1295.577637, 1268.961637, 90.000000, X, Y) && !ellipse(23534.728000, 25320.196000, 475.852814, 475.852814, 0.000000, X, Y) && !ellipse(23058.222000, 23929.614000, 1324.232038, 1324.232038, 0.000000, X, Y) && !ellipse(22320.995800, 28288.973800, 400.159212, 400.159212, 0.000000, X, Y) && !ellipse(21772.268180, 24870.694600, 367.389611, 367.389611, 0.000000, X, Y) && !ellipse(24093.924000, 25010.504000, 1152.408033, 468.993613, 41.401000, X, Y) && !ellipse(19759.252200, 27289.851800, 393.276811, 393.276811, 0.000000, X, Y) && !ellipse(20656.645930, 24918.718600, 378.761611, 378.761611, 0.000000, X, Y) && !ellipse(24596.654000, 24603.898000, 1161.272033, 1161.272033, 0.000000, X, Y) && !ellipse(19895.202400, 31232.011000, 368.165611, 368.165611, 0.000000, X, Y) && !ellipse(23960.483940, 26445.112600, 323.214409, 323.214409, 0.000000, X, Y) && !ellipse(21017.502060, 24211.485046, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21812.910000, 27830.144000, 1295.288037, 1295.288037, 0.000000, X, Y) && !ellipse(23051.886000, 27523.662400, 354.139210, 354.139210, 0.000000, X, Y) && !ellipse(19675.535800, 24826.832800, 312.641609, 312.641609, 0.000000, X, Y) && !ellipse(15883.773254, 27063.161743, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17059.681247, 28005.024411, 529.673615, 527.198959, -0.000000, X, Y) && !ellipse(24759.323980, 30909.603400, 327.780809, 327.780809, 0.000000, X, Y) && !ellipse(22797.996000, 25245.994000, 2381.496069, 2381.496069, 0.000000, X, Y) && !ellipse(22101.521317, 27123.627380, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19958.134750, 30462.257690, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21582.076000, 27083.106000, 2554.560074, 2554.560074, 0.000000, X, Y) && !ellipse(22526.744171, 27023.004425, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22021.478000, 26462.376000, 1266.248036, 1266.248036, 0.000000, X, Y) && !ellipse(15232.210000, 29035.804000, 1797.688052, 1797.688052, 0.000000, X, Y)
[Wed Jan 25 03:12:29 2012] Writing fullrun_mos1_xmm0109270101_pi300-10000_pass1_cl_src18.gif
[Wed Jan 25 03:40:07 2012] Mean detx,y = (-2933.29, 4375.55) 
[Wed Jan 25 03:40:09 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jan 25 03:40:50 2012] Binned source spectrum to 10 counts/bin
[Wed Jan 25 03:40:50 2012] Setting source spectrum file to fullrun_mos1_xmm0109270101_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Wed Jan 25 03:40:50 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0109270101_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Thu Jan 26 08:24:46 2012] Updating aperture counts using extracted products
[Thu Jan 26 08:24:46 2012] Error reading totcts from fullrun_mos1_xmm0109270101_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Thu Jan 26 08:24:50 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jan 26 08:24:50 2012] Using photon index=1.80, rate=0.0312, arf fullrun_mos1_xmm0109270101_pi300-10000_pass1_cl_src18.arf
[Thu Jan 26 08:24:50 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jan 26 08:24:50 2012] Updating source flux to 3.5e-13
[Thu Jan 26 08:25:00 2012] Flag b found in src. 18 procflags, skipping spectral fitting