[Tue Aug  7 20:23:59 2012] Detection parameters:
  Position = (388.4, 281.0) = 4 54 47.92 -66 25 42.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 217.0 +/- 18.8
  Background counts = 12.2
  Rate = 0.01 +/- 0.001

[Tue Aug  7 20:24:00 2012] Off-axis axis estimate = 6.64'
[Tue Aug  7 21:51:52 2012] Using EEF radius (= 9.75 ")to estimate initial spatial extent for simple fitting
[Tue Aug  7 21:51:52 2012] Initial guess for spatial extent in simple fitting = 9.75"
[Tue Aug  7 21:51:52 2012] source mask rpix=2.2, npix_max = 30, mask sum = 30, frac = 0.998
[Tue Aug  7 21:51:52 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 9.75"
[Tue Aug  7 22:17:47 2012] fullrun_mos2_xmm0109260201_pi300-10000_cl_pass0_src1.ximg exists
[Tue Aug  7 22:17:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109260201_pi300-10000_cl_pass0_src1.csv
[Tue Aug  7 22:17:47 2012] fullrun_mos2_xmm0109260201_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Aug  7 22:17:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109260201_pi300-10000_cl_pass0_src1.csv
[Tue Aug  7 22:17:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109260201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109260201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug  7 22:17:47 2012] fullrun_mos2_xmm0109260201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Aug  7 22:17:47 2012] fullrun_mos2_xmm0109260201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Aug  7 22:17:47 2012] Fit fullrun_mos2_xmm0109260201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Aug  7 22:18:00 2012] Spatial fit model total counts = 799.683000, observed total counts = 798.000000
[Tue Aug  7 22:18:00 2012] Offset between fit and detection position for source 1 = 1.300409 pixels
[Tue Aug  7 22:18:00 2012] 797.794000 total counts/ 327.678000 bgd. counts: snr = 25.970565
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 1.300409 pixels
  Position = (389.3, 280.1) = 4 54 47.25 -66 25 45.3
  Extent = 15.4 (13.2-17.9)", rotation angle = 0
  Source counts = 470.1 +/- 28.2
  Background counts = 327.7
  Rate = 0.01 +/- 0.0009
[Tue Aug  7 22:18:00 2012] Vigneting correction estimate = 1.000000
[Tue Aug  7 22:18:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug  7 22:18:00 2012] Assessing source extent using major axis lower bound
[Tue Aug  7 22:18:00 2012] Source does appear to be extended
[Tue Aug  7 22:18:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug  7 23:45:05 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Aug  7 23:45:05 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Aug  7 23:45:05 2012] Initial guess for spatial extent in simple fitting = 15.37"
[Tue Aug  7 23:45:05 2012] source mask rpix=3.5, npix_max = 65, mask sum = 64, frac = 0.983
[Tue Aug  7 23:45:05 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 15.37"
[Wed Aug  8 00:06:10 2012] fullrun_mos2_xmm0109260201_pi300-10000_cl_pass1_src1.ximg exists
[Wed Aug  8 00:06:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109260201_pi300-10000_cl_pass1_src1.csv
[Wed Aug  8 00:06:10 2012] fullrun_mos2_xmm0109260201_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Aug  8 00:06:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109260201_pi300-10000_cl_pass1_src1.csv
[Wed Aug  8 00:06:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109260201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109260201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  8 00:06:10 2012] fullrun_mos2_xmm0109260201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Aug  8 00:06:10 2012] fullrun_mos2_xmm0109260201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Aug  8 00:06:10 2012] Fit fullrun_mos2_xmm0109260201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Aug  8 00:06:28 2012] Spatial fit model total counts = 1159.170000, observed total counts = 1158.000000
[Wed Aug  8 00:06:28 2012] Offset between fit and detection position for source 1 = 0.868023 pixels
[Wed Aug  8 00:06:28 2012] 1153.466000 total counts/ 578.137000 bgd. counts: snr = 23.927696
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.868023 pixels
  Position = (388.7, 280.7) = 4 54 47.68 -66 25 42.6
  Extent = 16.9 (15.5-19.0)", rotation angle = 0
  Source counts = 575.3 +/- 34.0
  Background counts = 578.1
  Rate = 0.02 +/- 0.001
[Wed Aug  8 00:06:28 2012] Vigneting correction estimate = 1.000000
[Wed Aug  8 00:06:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug  8 00:06:28 2012] Assessing source extent using major axis lower bound
[Wed Aug  8 00:06:28 2012] Source does appear to be extended
[Wed Aug  8 00:06:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug  8 00:55:59 2012] XMMSAS src. selection expression = ellipse(33768.024600, 24370.517620, 1016.136029, 1016.136029, 0.000000, X, Y)
[Wed Aug  8 00:55:59 2012] Writing source region out to fullrun_mos2_xmm0109260201_pi300-10000_pass1_cl_src1_src.reg
[Wed Aug  8 00:55:59 2012] Extracting stamp from image fullrun_mos2_xmm0109260201_pi300-10000_cl_sm2.00.img.gz, (330, 222) - (447, 339)
[Wed Aug  8 00:55:59 2012] XMMSAS bgd. selection expression = annulus(33768.024600, 24370.517620, 1693.560049, 3387.120097, X, Y) && !ellipse(36172.104200, 24760.564400, 422.007212, 422.007212, 0.000000, X, Y)
[Wed Aug  8 00:55:59 2012] Writing fullrun_mos2_xmm0109260201_pi300-10000_pass1_cl_src1.gif
[Wed Aug  8 00:56:02 2012] Mean detx,y = (8557.81, 1360.25) 
[Wed Aug  8 00:56:03 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug  8 00:56:45 2012] Binned source spectrum to 10 counts/bin
[Wed Aug  8 00:56:45 2012] Setting source spectrum file to fullrun_mos2_xmm0109260201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Aug  8 00:56:45 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0109260201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Aug  8 01:06:22 2012] Updating aperture counts using extracted products
[Wed Aug  8 01:06:22 2012] Error reading totcts from fullrun_mos2_xmm0109260201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Aug  8 01:06:22 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug  8 01:06:22 2012] Using photon index=1.80, rate=0.0175, arf fullrun_mos2_xmm0109260201_pi300-10000_pass1_cl_src1.arf
[Wed Aug  8 01:06:22 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug  8 01:06:22 2012] Updating source flux to 3.4e-13
[Wed Aug  8 01:07:17 2012] Reading fit data from xmm0109260201/analysis//spectral/fullrun_mos2_xmm0109260201_pi300-10000_pass1_cl_src1_pl.csv
[Wed Aug  8 01:07:17 2012] Spectral fit parameter nH value = 5.15182e+21
[Wed Aug  8 01:07:17 2012] Spectral fit parameter PhoIndex value = 7.52646
[Wed Aug  8 01:07:17 2012] Failed to get F(0.3-8.0) from xmm0109260201/analysis//spectral/fullrun_mos2_xmm0109260201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Aug  8 01:07:17 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug  8 01:07:17 2012] Using Nh = 5.2e+21, photon index=7.53, rate=0.0175, arf fullrun_mos2_xmm0109260201_pi300-10000_pass1_cl_src1.arf
[Wed Aug  8 01:07:17 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug  8 01:07:17 2012] Updating source flux to 2.2e-13