[Wed Mar 28 11:17:37 2012] Detection parameters:
  Position = (173.1, 395.9) = 12 3 59.16 44 37 16.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 873.6 +/- 39.7
  Background counts = 157.0
  Rate = 0.008 +/- 0.0004

[Wed Mar 28 11:17:38 2012] Off-axis axis estimate = 11.51'
[Wed Mar 28 13:26:04 2012] Using EEF radius (= 12.18 ")to estimate initial spatial extent for simple fitting
[Wed Mar 28 13:26:04 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Mar 28 13:26:04 2012] Initial guess for spatial extent in simple fitting = 12.18"
[Wed Mar 28 13:26:04 2012] source mask rpix=2.8, npix_max = 43, mask sum = 35, frac = 0.803
[Wed Mar 28 13:26:04 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 12.18"
[Wed Mar 28 14:28:25 2012] fullrun_mos2_xmm0109141401_pi300-10000_cl_pass0_src5.ximg exists
[Wed Mar 28 14:28:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109141401_pi300-10000_cl_pass0_src5.csv
[Wed Mar 28 14:28:25 2012] fullrun_mos2_xmm0109141401_pi300-10000_cl_pass0_src5_1.ximg exists
[Wed Mar 28 14:28:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109141401_pi300-10000_cl_pass0_src5.csv
[Wed Mar 28 14:28:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109141401_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109141401_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 28 14:28:25 2012] fullrun_mos2_xmm0109141401_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Wed Mar 28 14:28:25 2012] fullrun_mos2_xmm0109141401_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Wed Mar 28 14:28:25 2012] Fit fullrun_mos2_xmm0109141401_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Wed Mar 28 14:28:42 2012] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 14.969098 pixels away
[Wed Mar 28 14:28:42 2012] Vigneting correction estimate = 1.000000
[Wed Mar 28 14:28:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 28 14:28:42 2012] Assessing source extent using major
[Wed Mar 28 14:28:42 2012] Source does appear to be extended
[Wed Mar 28 14:28:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 28 15:32:46 2012] Using EEF radius (= 12.18 ")to estimate initial spatial extent for simple fitting
[Wed Mar 28 15:32:46 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Mar 28 15:32:46 2012] Initial guess for spatial extent in simple fitting = 12.18"
[Wed Mar 28 15:32:46 2012] source mask rpix=2.8, npix_max = 43, mask sum = 35, frac = 0.803
[Wed Mar 28 15:32:46 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 12.18"
[Wed Mar 28 16:06:16 2012] fullrun_mos2_xmm0109141401_pi300-10000_cl_pass1_src5.ximg exists
[Wed Mar 28 16:06:16 2012] fullrun_mos2_xmm0109141401_pi300-10000_cl_pass1_src5_1.ximg exists
[Wed Mar 28 16:06:16 2012] Fit fullrun_mos2_xmm0109141401_pi300-10000_cl_pass1_src5 appears to have run properly
[Wed Mar 28 16:06:16 2012] fullrun_mos2_xmm0109141401_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Wed Mar 28 16:06:16 2012] fullrun_mos2_xmm0109141401_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Wed Mar 28 16:06:16 2012] Fit fullrun_mos2_xmm0109141401_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Wed Mar 28 16:06:29 2012] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 16.926370 pixels away
[Wed Mar 28 16:06:29 2012] Vigneting correction estimate = 1.000000
[Wed Mar 28 16:06:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 28 16:06:29 2012] Assessing source extent using major
[Wed Mar 28 16:06:29 2012] Source does appear to be extended
[Wed Mar 28 16:06:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 28 19:12:25 2012] XMMSAS src. selection expression = ellipse(15010.248703, 34390.660278, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Mar 28 19:12:25 2012] Writing source region out to fullrun_mos2_xmm0109141401_pi300-10000_pass1_cl_src6_src.reg
[Wed Mar 28 19:12:25 2012] Extracting stamp from image fullrun_mos2_xmm0109141401_pi300-10000_cl_sm2.00.img.gz, (136, 358) - (211, 433)
[Wed Mar 28 19:12:25 2012] XMMSAS bgd. selection expression = annulus(15010.248703, 34390.660278, 1087.500000, 2175.000000, X, Y)
[Wed Mar 28 19:12:25 2012] Writing fullrun_mos2_xmm0109141401_pi300-10000_pass1_cl_src6.gif
[Wed Mar 28 19:27:16 2012] Mean detx,y = (3438.34, 11966.44) 
[Wed Mar 28 19:27:18 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar 28 19:27:37 2012] Binned source spectrum to 10 counts/bin
[Wed Mar 28 19:27:37 2012] Setting source spectrum file to fullrun_mos2_xmm0109141401_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Wed Mar 28 19:27:37 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0109141401_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Wed Mar 28 20:24:51 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Mar 28 20:24:51 2012] rmf not generated due to insufficient counts
[Wed Mar 28 20:28:58 2012] Updating aperture counts using extracted products
[Wed Mar 28 20:28:58 2012] Error reading totcts from fullrun_mos2_xmm0109141401_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Wed Mar 28 20:28:59 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar 28 20:28:59 2012] Using photon index=1.80, rate=0.00818, arf fullrun_mos2_xmm0109141401_pi300-10000_pass1_cl_src6.arf
[Wed Mar 28 20:28:59 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar 28 20:28:59 2012] Updating source flux to 2.1e-13
[Wed Mar 28 20:29:58 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting