[Wed Mar 28 11:17:37 2012] Detection parameters:
  Position = (201.1, 270.8) = 12 3 47.65 44 28 12.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 648.6 +/- 36.8
  Background counts = 181.6
  Rate = 0.01 +/- 0.0006

[Wed Mar 28 11:17:38 2012] Off-axis axis estimate = 7.34'
[Wed Mar 28 13:26:04 2012] Using EEF radius (= 10.10 ")to estimate initial spatial extent for simple fitting
[Wed Mar 28 13:26:04 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Mar 28 13:26:04 2012] Initial guess for spatial extent in simple fitting = 10.10"
[Wed Mar 28 13:26:04 2012] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.131
[Wed Mar 28 13:26:04 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 10.10"
[Wed Mar 28 14:28:25 2012] fullrun_mos2_xmm0109141401_pi300-10000_cl_pass0_src3.ximg exists
[Wed Mar 28 14:28:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109141401_pi300-10000_cl_pass0_src3.csv
[Wed Mar 28 14:28:25 2012] fullrun_mos2_xmm0109141401_pi300-10000_cl_pass0_src3_1.ximg exists
[Wed Mar 28 14:28:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109141401_pi300-10000_cl_pass0_src3.csv
[Wed Mar 28 14:28:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109141401_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109141401_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 28 14:28:25 2012] fullrun_mos2_xmm0109141401_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Wed Mar 28 14:28:25 2012] fullrun_mos2_xmm0109141401_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Wed Mar 28 14:28:25 2012] Fit fullrun_mos2_xmm0109141401_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Wed Mar 28 14:28:42 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 12.935941 pixels away
[Wed Mar 28 14:28:42 2012] Vigneting correction estimate = 1.000000
[Wed Mar 28 14:28:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 28 14:28:42 2012] Assessing source extent using major
[Wed Mar 28 14:28:42 2012] Source does appear to be extended
[Wed Mar 28 14:28:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 28 15:32:46 2012] Using EEF radius (= 10.10 ")to estimate initial spatial extent for simple fitting
[Wed Mar 28 15:32:46 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Mar 28 15:32:46 2012] Initial guess for spatial extent in simple fitting = 10.10"
[Wed Mar 28 15:32:46 2012] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.131
[Wed Mar 28 15:32:46 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 10.10"
[Wed Mar 28 16:06:16 2012] fullrun_mos2_xmm0109141401_pi300-10000_cl_pass1_src3.ximg exists
[Wed Mar 28 16:06:16 2012] fullrun_mos2_xmm0109141401_pi300-10000_cl_pass1_src3_1.ximg exists
[Wed Mar 28 16:06:16 2012] Fit fullrun_mos2_xmm0109141401_pi300-10000_cl_pass1_src3 appears to have run properly
[Wed Mar 28 16:06:16 2012] fullrun_mos2_xmm0109141401_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Wed Mar 28 16:06:16 2012] fullrun_mos2_xmm0109141401_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Wed Mar 28 16:06:16 2012] Fit fullrun_mos2_xmm0109141401_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Wed Mar 28 16:06:29 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 13.218443 pixels away
[Wed Mar 28 16:06:29 2012] Vigneting correction estimate = 1.000000
[Wed Mar 28 16:06:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 28 16:06:29 2012] Assessing source extent using major
[Wed Mar 28 16:06:29 2012] Source does appear to be extended
[Wed Mar 28 16:06:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 28 19:12:25 2012] XMMSAS src. selection expression = ellipse(17445.201294, 23511.191864, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Mar 28 19:12:25 2012] Writing source region out to fullrun_mos2_xmm0109141401_pi300-10000_pass1_cl_src5_src.reg
[Wed Mar 28 19:12:25 2012] Extracting stamp from image fullrun_mos2_xmm0109141401_pi300-10000_cl_sm2.00.img.gz, (164, 233) - (239, 308)
[Wed Mar 28 19:12:25 2012] XMMSAS bgd. selection expression = annulus(17445.201294, 23511.191864, 1087.500000, 2175.000000, X, Y)
[Wed Mar 28 19:12:25 2012] Writing fullrun_mos2_xmm0109141401_pi300-10000_pass1_cl_src5.gif
[Wed Mar 28 19:26:05 2012] Mean detx,y = (9022.47, 2307.10) 
[Wed Mar 28 19:26:07 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar 28 19:26:22 2012] Binned source spectrum to 10 counts/bin
[Wed Mar 28 19:26:22 2012] Setting source spectrum file to fullrun_mos2_xmm0109141401_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Wed Mar 28 19:26:22 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0109141401_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Wed Mar 28 20:24:30 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Mar 28 20:24:30 2012] rmf not generated due to insufficient counts
[Wed Mar 28 20:28:58 2012] Updating aperture counts using extracted products
[Wed Mar 28 20:28:58 2012] Error reading totcts from fullrun_mos2_xmm0109141401_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Wed Mar 28 20:28:59 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar 28 20:28:59 2012] Using photon index=1.80, rate=0.011, arf fullrun_mos2_xmm0109141401_pi300-10000_pass1_cl_src5.arf
[Wed Mar 28 20:28:59 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar 28 20:28:59 2012] Updating source flux to 2e-13
[Wed Mar 28 20:29:58 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting