[Wed Mar 28 11:17:36 2012] Detection parameters:
  Position = (294.8, 321.8) = 12 3 9.55 44 31 53.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 744862.1 +/- 925.5
  Background counts = 288.4
  Rate = 7 +/- 0.009

[Wed Mar 28 11:17:38 2012] Off-axis axis estimate = 1.71'
[Wed Mar 28 13:26:04 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Wed Mar 28 13:26:04 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Wed Mar 28 13:26:04 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.846
[Wed Mar 28 13:26:04 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Wed Mar 28 14:28:25 2012] fullrun_mos2_xmm0109141401_pi300-10000_cl_pass0_src1.ximg exists
[Wed Mar 28 14:28:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109141401_pi300-10000_cl_pass0_src1.csv
[Wed Mar 28 14:28:25 2012] fullrun_mos2_xmm0109141401_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Mar 28 14:28:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109141401_pi300-10000_cl_pass0_src1.csv
[Wed Mar 28 14:28:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109141401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109141401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 28 14:28:25 2012] fullrun_mos2_xmm0109141401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Mar 28 14:28:25 2012] fullrun_mos2_xmm0109141401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Mar 28 14:28:25 2012] Fit fullrun_mos2_xmm0109141401_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Mar 28 14:28:42 2012] Spatial fit model total counts = 451096.000000, observed total counts = 477957.000000
[Wed Mar 28 14:28:42 2012] Offset between fit and detection position for source 2 = 0.251909 pixels
[Wed Mar 28 14:28:42 2012] 446217.000000 total counts/ 25600.000000 bgd. counts: snr = 2628.856250
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.251909 pixels
  Position = (294.7, 321.6) = 12 3 9.62 44 31 53.2
  Extent = 6.6 (6.6-6.7)", rotation angle = 0
  Source counts = 420617.0 +/- 668.0
  Background counts = 25600.0
  Rate = 5 +/- 0.009
[Wed Mar 28 14:28:42 2012] Vigneting correction estimate = 1.000000
[Wed Mar 28 14:28:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 28 14:28:42 2012] Assessing source extent using major axis lower bound
[Wed Mar 28 14:28:42 2012] Source does appear to be extended
[Wed Mar 28 14:28:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 28 15:32:46 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Mar 28 15:32:46 2012] Initial guess for spatial extent in simple fitting = 6.64"
[Wed Mar 28 15:32:46 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.974
[Wed Mar 28 15:32:46 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.64"
[Wed Mar 28 16:06:16 2012] fullrun_mos2_xmm0109141401_pi300-10000_cl_pass1_src1.ximg exists
[Wed Mar 28 16:06:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109141401_pi300-10000_cl_pass1_src1.csv
[Wed Mar 28 16:06:16 2012] fullrun_mos2_xmm0109141401_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Mar 28 16:06:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109141401_pi300-10000_cl_pass1_src1.csv
[Wed Mar 28 16:06:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109141401_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109141401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 28 16:06:16 2012] fullrun_mos2_xmm0109141401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Mar 28 16:06:16 2012] fullrun_mos2_xmm0109141401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Mar 28 16:06:16 2012] Fit fullrun_mos2_xmm0109141401_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Mar 28 16:06:29 2012] Spatial fit model total counts = 452427.000000, observed total counts = 478377.000000
[Wed Mar 28 16:06:29 2012] Offset between fit and detection position for source 2 = 0.005693 pixels
[Wed Mar 28 16:06:29 2012] 448799.000000 total counts/ 25600.000000 bgd. counts: snr = 2644.993750
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.005693 pixels
  Position = (294.7, 321.6) = 12 3 9.63 44 31 53.2
  Extent = 6.7 (6.7-6.7)", rotation angle = 0
  Source counts = 423199.0 +/- 669.9
  Background counts = 25600.0
  Rate = 5 +/- 0.009
[Wed Mar 28 16:06:29 2012] Vigneting correction estimate = 1.000000
[Wed Mar 28 16:06:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 28 16:06:29 2012] Assessing source extent using major axis lower bound
[Wed Mar 28 16:06:29 2012] Source does appear to be extended
[Wed Mar 28 16:06:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 28 19:12:25 2012] Counts = 423199.000000, rescaling region sizes by 3.000000
[Wed Mar 28 19:12:25 2012] XMMSAS src. selection expression = ellipse(25587.222600, 27931.604200, 1208.212235, 1208.212235, 0.000000, X, Y)
[Wed Mar 28 19:12:25 2012] Writing source region out to fullrun_mos2_xmm0109141401_pi300-10000_pass1_cl_src2_src.reg
[Wed Mar 28 19:12:25 2012] Extracting stamp from image fullrun_mos2_xmm0109141401_pi300-10000_cl_sm2.00.img.gz, (225, 252) - (364, 391)
[Wed Mar 28 19:12:25 2012] XMMSAS bgd. selection expression = annulus(25587.222600, 27931.604200, 6041.061174, 12082.122348, X, Y) && !ellipse(26482.182922, 28406.858795, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30410.877563, 22912.379211, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17445.201294, 23511.191864, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33495.732208, 37074.034668, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15010.248703, 34390.660278, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38151.235809, 28992.226379, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29829.561554, 37080.414703, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Mar 28 19:12:25 2012] Writing fullrun_mos2_xmm0109141401_pi300-10000_pass1_cl_src2.gif
[Wed Mar 28 19:13:26 2012] Mean detx,y = (65.78, 65.36) 
[Wed Mar 28 19:13:33 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar 28 19:18:13 2012] Binned source spectrum to 10 counts/bin
[Wed Mar 28 19:18:14 2012] Setting source spectrum file to fullrun_mos2_xmm0109141401_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed Mar 28 19:18:14 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0109141401_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Wed Mar 28 20:28:57 2012] Updating aperture counts using extracted products
[Wed Mar 28 20:28:58 2012] Error reading totcts from fullrun_mos2_xmm0109141401_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed Mar 28 20:28:58 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar 28 20:28:58 2012] Using photon index=1.80, rate=5.45, arf fullrun_mos2_xmm0109141401_pi300-10000_pass1_cl_src2.arf
[Wed Mar 28 20:28:58 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar 28 20:28:58 2012] Updating source flux to 5.5e-11
[Wed Mar 28 20:30:20 2012] Reading fit data from xmm0109141401/analysis//spectral/fullrun_mos2_xmm0109141401_pi300-10000_pass1_cl_src2_pl.csv
[Wed Mar 28 20:30:20 2012] Spectral fit parameter nH value = 1.52106e+13
[Wed Mar 28 20:30:20 2012] Spectral fit parameter PhoIndex value = 2.34129
[Wed Mar 28 20:30:20 2012] Failed to get F(0.3-8.0) from xmm0109141401/analysis//spectral/fullrun_mos2_xmm0109141401_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Wed Mar 28 20:30:20 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar 28 20:30:20 2012] Using Nh = 1.5e+13, photon index=2.34, rate=5.45, arf fullrun_mos2_xmm0109141401_pi300-10000_pass1_cl_src2.arf
[Wed Mar 28 20:30:20 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar 28 20:30:20 2012] Updating source flux to 4.6e-11