[Wed Mar 28 11:17:33 2012] Detection parameters:
  Position = (201.2, 270.8) = 12 3 47.62 44 28 11.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 659.6 +/- 38.6
  Background counts = 275.2
  Rate = 0.01 +/- 0.0007

[Wed Mar 28 11:17:35 2012] Off-axis axis estimate = 7.33'
[Wed Mar 28 12:34:42 2012] Using EEF radius (= 10.09 ")to estimate initial spatial extent for simple fitting
[Wed Mar 28 12:34:42 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Mar 28 12:34:42 2012] Initial guess for spatial extent in simple fitting = 10.09"
[Wed Mar 28 12:34:42 2012] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.131
[Wed Mar 28 12:34:42 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 10.09"
[Wed Mar 28 13:26:03 2012] fullrun_mos1_xmm0109141401_pi300-10000_cl_pass0_src1.ximg exists
[Wed Mar 28 13:26:03 2012] fullrun_mos1_xmm0109141401_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Mar 28 13:26:03 2012] Fit fullrun_mos1_xmm0109141401_pi300-10000_cl_pass0_src1 appears to have run properly
[Wed Mar 28 13:26:03 2012] fullrun_mos1_xmm0109141401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Mar 28 13:26:03 2012] fullrun_mos1_xmm0109141401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Mar 28 13:26:03 2012] Fit fullrun_mos1_xmm0109141401_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Mar 28 14:28:35 2012] Spatial fit model total counts = 1030.000000, observed total counts = 1030.000000
[Wed Mar 28 14:28:35 2012] Offset between fit and detection position for source 2 = 0.309238 pixels
[Wed Mar 28 14:28:35 2012] 1038.968000 total counts/ 686.621000 bgd. counts: snr = 13.446586
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.309238 pixels
  Position = (201.5, 270.8) = 12 3 47.50 44 28 11.8
  Extent = 6.8 (5.8-7.8)", rotation angle = 0
  Source counts = 352.3 +/- 32.2
  Background counts = 686.6
  Rate = 0.005 +/- 0.0005
[Wed Mar 28 14:28:35 2012] Vigneting correction estimate = 1.000000
[Wed Mar 28 14:28:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 28 14:28:35 2012] Assessing source extent using major axis lower bound
[Wed Mar 28 14:28:35 2012] Source does appear to be extended
[Wed Mar 28 14:28:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 28 14:49:26 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Mar 28 14:49:26 2012] Initial guess for spatial extent in simple fitting = 6.81"
[Wed Mar 28 14:49:26 2012] source mask rpix=1.6, npix_max = 17, mask sum = 20, frac = 1.172
[Wed Mar 28 14:49:26 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.81"
[Wed Mar 28 15:32:46 2012] fullrun_mos1_xmm0109141401_pi300-10000_cl_pass1_src1.ximg exists
[Wed Mar 28 15:32:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109141401_pi300-10000_cl_pass1_src1.csv
[Wed Mar 28 15:32:46 2012] fullrun_mos1_xmm0109141401_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Mar 28 15:32:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109141401_pi300-10000_cl_pass1_src1.csv
[Wed Mar 28 15:32:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109141401_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109141401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 28 15:32:46 2012] fullrun_mos1_xmm0109141401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Mar 28 15:32:46 2012] fullrun_mos1_xmm0109141401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Mar 28 15:32:46 2012] Fit fullrun_mos1_xmm0109141401_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Mar 28 16:06:26 2012] Spatial fit model total counts = 865.903000, observed total counts = 866.000000
[Wed Mar 28 16:06:26 2012] Offset between fit and detection position for source 2 = 0.092278 pixels
[Wed Mar 28 16:06:26 2012] 868.298000 total counts/ 548.123000 bgd. counts: snr = 13.675663
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.092278 pixels
  Position = (201.4, 270.9) = 12 3 47.53 44 28 12.0
  Extent = 6.2 (5.3-7.2)", rotation angle = 0
  Source counts = 320.2 +/- 29.5
  Background counts = 548.1
  Rate = 0.005 +/- 0.0004
[Wed Mar 28 16:06:26 2012] Vigneting correction estimate = 1.000000
[Wed Mar 28 16:06:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 28 16:06:26 2012] Assessing source extent using major axis lower bound
[Wed Mar 28 16:06:26 2012] Source does appear to be extended
[Wed Mar 28 16:06:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 28 18:34:36 2012] XMMSAS src. selection expression = ellipse(17472.405600, 23515.705600, 369.303011, 369.303011, 0.000000, X, Y)
[Wed Mar 28 18:34:36 2012] Writing source region out to fullrun_mos1_xmm0109141401_pi300-10000_pass1_cl_src2_src.reg
[Wed Mar 28 18:34:36 2012] Extracting stamp from image fullrun_mos1_xmm0109141401_pi300-10000_cl_sm2.00.img.gz, (180, 250) - (223, 292)
[Wed Mar 28 18:34:36 2012] XMMSAS bgd. selection expression = annulus(17472.405600, 23515.705600, 615.505018, 1231.010035, X, Y)
[Wed Mar 28 18:34:36 2012] Writing fullrun_mos1_xmm0109141401_pi300-10000_pass1_cl_src2.gif
[Wed Mar 28 18:34:44 2012] Mean detx,y = (2585.82, -9173.59) 
[Wed Mar 28 18:34:46 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar 28 18:35:04 2012] Binned source spectrum to 10 counts/bin
[Wed Mar 28 18:35:04 2012] Setting source spectrum file to fullrun_mos1_xmm0109141401_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed Mar 28 18:35:04 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0109141401_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Wed Mar 28 20:28:55 2012] Updating aperture counts using extracted products
[Wed Mar 28 20:28:55 2012] Error reading totcts from fullrun_mos1_xmm0109141401_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed Mar 28 20:28:56 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar 28 20:28:56 2012] Using photon index=1.80, rate=0.00471, arf fullrun_mos1_xmm0109141401_pi300-10000_pass1_cl_src2.arf
[Wed Mar 28 20:28:56 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar 28 20:28:56 2012] Updating source flux to 9.5e-14
[Wed Mar 28 20:29:57 2012] Reading fit data from xmm0109141401/analysis//spectral/fullrun_mos1_xmm0109141401_pi300-10000_pass1_cl_src2_pl.csv
[Wed Mar 28 20:29:57 2012] Spectral fit parameter nH value = 81553200000.0
[Wed Mar 28 20:29:57 2012] Spectral fit parameter PhoIndex value = 1.59345
[Wed Mar 28 20:29:57 2012] Failed to get F(0.3-8.0) from xmm0109141401/analysis//spectral/fullrun_mos1_xmm0109141401_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Wed Mar 28 20:29:57 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar 28 20:29:57 2012] Using Nh = 8.2e+10, photon index=1.59, rate=0.00471, arf fullrun_mos1_xmm0109141401_pi300-10000_pass1_cl_src2.arf
[Wed Mar 28 20:29:57 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar 28 20:29:58 2012] Updating source flux to 1.1e-13