[Wed May 1 01:27:07 2013] Detection parameters: Position = (317.0, 296.1) = 12 18 19.49 29 46 54.3 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 2225.6 +/- 82.7 Background counts = 1138.9 Rate = 0.03 +/- 0.001 [Wed May 1 01:27:07 2013] Off-axis axis estimate = 1.36' [Wed May 1 01:52:47 2013] Using EEF radius (= 7.11 ")to estimate initial spatial extent for simple fitting [Wed May 1 01:52:47 2013] Initial guess for spatial extent in simple fitting = 7.11" [Wed May 1 01:52:47 2013] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.878 [Wed May 1 01:52:47 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 7.11" [Wed May 1 02:11:40 2013] fullrun_pn_xmm0109141301_pi300-10000_cl_pass0_src3.ximg exists [Wed May 1 02:11:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109141301_pi300-10000_cl_pass0_src3.csv [Wed May 1 02:11:40 2013] fullrun_pn_xmm0109141301_pi300-10000_cl_pass0_src3_1.ximg exists [Wed May 1 02:11:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109141301_pi300-10000_cl_pass0_src3.csv [Wed May 1 02:11:40 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0109141301_pi300-10000_cl_pass0_src3_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0109141301_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 1 02:11:40 2013] fullrun_pn_xmm0109141301_pi300-10000_cl_pass0_tfrozen_src3.ximg exists [Wed May 1 02:11:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109141301_pi300-10000_cl_pass0_tfrozen_src3.csv [Wed May 1 02:11:40 2013] fullrun_pn_xmm0109141301_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists [Wed May 1 02:11:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109141301_pi300-10000_cl_pass0_tfrozen_src3.csv [Wed May 1 02:11:40 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0109141301_pi300-10000_cl_pass0_tfrozen_src3_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0109141301_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 1 04:10:32 2013] Spatial fit model total counts = 8012.570000, observed total counts = 20940.000000 [Wed May 1 04:10:32 2013] Poor agreement between spatial fit and data for source 3 It may help to tweak spatial fit manually Not incorporating fit results [Wed May 1 04:10:32 2013] Vigneting correction estimate = 1.000000 [Wed May 1 04:10:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed May 1 04:10:32 2013] Assessing source extent using major [Wed May 1 04:10:32 2013] Source does appear to be extended [Wed May 1 04:10:32 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Wed May 1 04:10:50 2013] Using EEF radius (= 7.11 ")to estimate initial spatial extent for simple fitting [Wed May 1 04:10:50 2013] Initial guess for spatial extent in simple fitting = 7.11" [Wed May 1 04:10:50 2013] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.878 [Wed May 1 04:10:50 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 7.11" [Wed May 1 04:22:23 2013] fullrun_pn_xmm0109141301_pi300-10000_cl_pass1_src3.ximg exists [Wed May 1 04:22:23 2013] fullrun_pn_xmm0109141301_pi300-10000_cl_pass1_src3_1.ximg exists [Wed May 1 04:22:23 2013] Fit fullrun_pn_xmm0109141301_pi300-10000_cl_pass1_src3 appears to have run properly [Wed May 1 04:22:23 2013] fullrun_pn_xmm0109141301_pi300-10000_cl_pass1_tfrozen_src3.ximg exists [Wed May 1 04:22:23 2013] fullrun_pn_xmm0109141301_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists [Wed May 1 04:22:23 2013] Fit fullrun_pn_xmm0109141301_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly [Wed May 1 05:43:39 2013] Source 3 is offset by -3.365851 and 4.099990 pixels which is larger than 2 X fitted extent = 2.840524 x 6.536046, not incorporating fit results [Wed May 1 05:43:39 2013] Vigneting correction estimate = 1.000000 [Wed May 1 05:43:39 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed May 1 05:43:39 2013] Assessing source extent using major [Wed May 1 05:43:39 2013] Source does appear to be extended [Wed May 1 05:43:39 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Wed May 1 05:43:54 2013] Counts = 2225.625732, rescaling region sizes by 2.000000 [Wed May 1 05:43:54 2013] XMMSAS src. selection expression = ellipse(27532.862976, 25708.879089, 1305.000000, 1305.000000, 0.000000, X, Y) [Wed May 1 05:43:54 2013] Writing source region out to fullrun_pn_xmm0109141301_pi300-10000_pass1_cl_src3_src.reg [Wed May 1 05:43:54 2013] Extracting stamp from image fullrun_pn_xmm0109141301_pi300-10000_cl_sm2.00.img.gz, (242, 221) - (392, 371) [Wed May 1 05:43:54 2013] XMMSAS bgd. selection expression = annulus(27532.862976, 25708.879089, 4350.000000, 8700.000000, X, Y) && !ellipse(28170.179200, 24922.050000, 1180.848034, 425.748012, 50.243700, X, Y) && !ellipse(25683.469600, 27937.216200, 1867.063254, 1840.312853, 53.828298, X, Y) [Wed May 1 05:43:54 2013] Writing fullrun_pn_xmm0109141301_pi300-10000_pass1_cl_src3.gif [Wed May 1 06:16:33 2013] Mean detx,y = (40.12, 2476.13) [Wed May 1 06:17:01 2013] Setting backscal keywords in source and bgd. spectrum [Wed May 1 06:17:56 2013] Binned source spectrum to 10 counts/bin [Wed May 1 06:17:56 2013] Setting source spectrum file to fullrun_pn_xmm0109141301_pi300-10000_pass1_cl_src3_src_b10.pi.gz [Wed May 1 06:17:56 2013] Setting bgd. spectrum file to fullrun_pn_xmm0109141301_pi300-10000_pass1_cl_src3_bgd.pi.gz [Wed May 1 06:22:41 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Wed May 1 06:22:41 2013] rmf not generated due to insufficient counts [Wed May 1 08:01:07 2013] Updating aperture counts using extracted products [Wed May 1 08:01:07 2013] Total counts from fullrun_pn_xmm0109141301_pi300-10000_pass1_cl_src3_src_b10.pi.gz = 49857.00 [Wed May 1 08:01:07 2013] Total counts from fullrun_pn_xmm0109141301_pi300-10000_pass1_cl_src3_bgd.pi.gz = 1057.00 [Wed May 1 08:01:07 2013] Got source and background scale factors 5347200.000000, 260340.000000 [Wed May 1 08:01:07 2013] User source parameters: Position = (317.0, 296.1) = 12 18 19.49 29 46 54.3 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 28147.0 +/- 224.3 Background aperture counts = 21710.0 Rate = 0.2 +/- 0.002 [Wed May 1 08:01:07 2013] Updating counts from extracted products [Wed May 1 08:01:07 2013] Set source signif. to 28146.97/147.34 = 191.03 [Wed May 1 08:01:07 2013] Calculating source flux in energy range 0.30-8.00 [Wed May 1 08:01:07 2013] Using photon index=1.80, rate=0.224, arf fullrun_pn_xmm0109141301_pi300-10000_pass1_cl_src3.arf [Wed May 1 08:01:07 2013] Assuming count rate is from the 0.30-10.00 bandpass [Wed May 1 08:01:07 2013] Updating source flux to 5.7e-13 [Wed May 1 08:01:20 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Wed May 1 08:01:22 2013] xmm0109141301/analysis//spectral/fullrun_pn_xmm0109141301_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete