[Wed May  1 01:27:07 2013] Detection parameters:
  Position = (322.9, 289.0) = 12 18 17.52 29 46 23.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2332.2 +/- 80.3
  Background counts = 1106.6
  Rate = 0.03 +/- 0.001

[Wed May  1 01:27:07 2013] Off-axis axis estimate = 1.90'
[Wed May  1 01:52:47 2013] Using EEF radius (= 7.38 ")to estimate initial spatial extent for simple fitting
[Wed May  1 01:52:47 2013] Initial guess for spatial extent in simple fitting = 7.38"
[Wed May  1 01:52:47 2013] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.829
[Wed May  1 01:52:47 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 7.38"
[Wed May  1 02:11:40 2013] fullrun_pn_xmm0109141301_pi300-10000_cl_pass0_src1.ximg exists
[Wed May  1 02:11:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109141301_pi300-10000_cl_pass0_src1.csv
[Wed May  1 02:11:40 2013] fullrun_pn_xmm0109141301_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed May  1 02:11:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109141301_pi300-10000_cl_pass0_src1.csv
[Wed May  1 02:11:40 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109141301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109141301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  1 02:11:40 2013] fullrun_pn_xmm0109141301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed May  1 02:11:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109141301_pi300-10000_cl_pass0_tfrozen_src1.csv
[Wed May  1 02:11:40 2013] fullrun_pn_xmm0109141301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed May  1 02:11:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109141301_pi300-10000_cl_pass0_tfrozen_src1.csv
[Wed May  1 02:11:40 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109141301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109141301_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  1 04:10:32 2013] Spatial fit model total counts = 14829.400000, observed total counts = 16832.000000
[Wed May  1 04:10:32 2013] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed May  1 04:10:32 2013] Vigneting correction estimate = 1.000000
[Wed May  1 04:10:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  1 04:10:32 2013] Assessing source extent using major
[Wed May  1 04:10:32 2013] Source does appear to be extended
[Wed May  1 04:10:32 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  1 04:10:50 2013] Using EEF radius (= 7.38 ")to estimate initial spatial extent for simple fitting
[Wed May  1 04:10:50 2013] Initial guess for spatial extent in simple fitting = 7.38"
[Wed May  1 04:10:50 2013] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.829
[Wed May  1 04:10:50 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 7.38"
[Wed May  1 04:22:23 2013] fullrun_pn_xmm0109141301_pi300-10000_cl_pass1_src1.ximg exists
[Wed May  1 04:22:23 2013] fullrun_pn_xmm0109141301_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed May  1 04:22:23 2013] Fit fullrun_pn_xmm0109141301_pi300-10000_cl_pass1_src1 appears to have run properly
[Wed May  1 04:22:23 2013] fullrun_pn_xmm0109141301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed May  1 04:22:23 2013] fullrun_pn_xmm0109141301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed May  1 04:22:23 2013] Fit fullrun_pn_xmm0109141301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed May  1 05:43:39 2013] Spatial fit model total counts = 17020.700000, observed total counts = 16832.000000
[Wed May  1 05:43:39 2013] Offset between fit and detection position for source 1 = 2.409287 pixels
[Wed May  1 05:43:39 2013] 17150.610000 total counts/ 13525.600000 bgd. counts: snr = 31.169579
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 2.409287 pixels
  Position = (324.4, 287.0) = 12 18 17.04 29 46 15.5
  Extent = 14.8 (14.7-29.5)" x 5.3 (5.0-5.7)", rotation angle = 50 (49-52) degrees
  Source counts = 3625.0 +/- 131.0
  Background counts = 13525.6
  Rate = 0.03 +/- 0.001
[Wed May  1 05:43:39 2013] Vigneting correction estimate = 1.000000
[Wed May  1 05:43:39 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  1 05:43:39 2013] Assessing source extent using major axis lower bound
[Wed May  1 05:43:39 2013] Source does appear to be extended
[Wed May  1 05:43:39 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 2.59
[Wed May  1 05:43:39 2013] Source is asymmetric
[Wed May  1 05:43:54 2013] Counts = 3625.010000, rescaling region sizes by 2.000000
[Wed May  1 05:43:54 2013] XMMSAS src. selection expression = ellipse(28170.179200, 24922.050000, 1771.272051, 638.622018, 50.243700, X, Y)
[Wed May  1 05:43:54 2013] Writing source region out to fullrun_pn_xmm0109141301_pi300-10000_pass1_cl_src1_src.reg
[Wed May  1 05:43:54 2013] Extracting stamp from image fullrun_pn_xmm0109141301_pi300-10000_cl_sm2.00.img.gz, (223, 185) - (426, 389)
[Wed May  1 05:43:54 2013] XMMSAS bgd. selection expression = annulus(28170.179200, 24922.050000, 5904.240170, 11808.480340, X, Y) && !ellipse(25683.469600, 27937.216200, 1867.063254, 1840.312853, 53.828298, X, Y) && !ellipse(27532.862976, 25708.879089, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May  1 05:43:54 2013] Writing fullrun_pn_xmm0109141301_pi300-10000_pass1_cl_src1.gif
[Wed May  1 05:51:02 2013] Mean detx,y = (84.19, 3575.09) 
[Wed May  1 05:51:16 2013] Setting backscal keywords in source and bgd. spectrum
[Wed May  1 05:52:32 2013] Binned source spectrum to 10 counts/bin
[Wed May  1 05:52:32 2013] Setting source spectrum file to fullrun_pn_xmm0109141301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed May  1 05:52:32 2013] Setting bgd. spectrum file to fullrun_pn_xmm0109141301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed May  1 08:01:07 2013] Updating aperture counts using extracted products
[Wed May  1 08:01:07 2013] Total counts from fullrun_pn_xmm0109141301_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 20524.00
[Wed May  1 08:01:07 2013] Total counts from fullrun_pn_xmm0109141301_pi300-10000_pass1_cl_src1_bgd.pi.gz = 0.00
[Wed May  1 08:01:07 2013] Got source and background scale factors 3464051.000000, 0.000000
[Wed May  1 08:01:07 2013] Background scale factor is not positive, halting re-assessment of this source
[Wed May  1 08:01:07 2013] Calculating source flux in energy range 0.30-8.00
[Wed May  1 08:01:07 2013] Using photon index=1.80, rate=0.0289, arf fullrun_pn_xmm0109141301_pi300-10000_pass1_cl_src1.arf
[Wed May  1 08:01:07 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May  1 08:01:07 2013] Updating source flux to 8.7e-14
[Wed May  1 08:01:20 2013] Flag p found in src. 1 procflags, skipping spectral fitting
[Wed May  1 08:01:22 2013] xmm0109141301/analysis//spectral/fullrun_pn_xmm0109141301_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete