[Wed May  1 01:27:12 2013] Detection parameters:
  Position = (308.6, 323.0) = 12 18 22.29 29 48 47.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1587.4 +/- 71.7
  Background counts = 223.6
  Rate = 0.02 +/- 0.0007

[Wed May  1 01:27:13 2013] Off-axis axis estimate = 1.93'
[Wed May  1 02:38:43 2013] Using EEF radius (= 7.39 ")to estimate initial spatial extent for simple fitting
[Wed May  1 02:38:43 2013] Initial guess for spatial extent in simple fitting = 7.39"
[Wed May  1 02:38:43 2013] source mask rpix=1.7, npix_max = 19, mask sum = 13, frac = 0.672
[Wed May  1 02:38:43 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 7.39"
[Wed May  1 04:10:29 2013] fullrun_mos2_xmm0109141301_pi300-10000_cl_pass0_src3.ximg exists
[Wed May  1 04:10:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109141301_pi300-10000_cl_pass0_src3.csv
[Wed May  1 04:10:29 2013] fullrun_mos2_xmm0109141301_pi300-10000_cl_pass0_src3_1.ximg exists
[Wed May  1 04:10:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109141301_pi300-10000_cl_pass0_src3.csv
[Wed May  1 04:10:29 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109141301_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109141301_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  1 04:10:30 2013] fullrun_mos2_xmm0109141301_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Wed May  1 04:10:30 2013] fullrun_mos2_xmm0109141301_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Wed May  1 04:10:30 2013] Fit fullrun_mos2_xmm0109141301_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Wed May  1 04:10:42 2013] Warning, spatial fit 3 centroid is now closest to src. 5
[Wed May  1 04:10:42 2013] Vigneting correction estimate = 1.000000
[Wed May  1 04:10:42 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  1 04:10:42 2013] Assessing source extent using major
[Wed May  1 04:10:42 2013] Source does appear to be extended
[Wed May  1 04:10:42 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  1 04:10:42 2013] Source is confused with source 5
[Wed May  1 04:49:03 2013] Using EEF radius (= 7.39 ")to estimate initial spatial extent for simple fitting
[Wed May  1 04:49:03 2013] Initial guess for spatial extent in simple fitting = 7.39"
[Wed May  1 04:49:03 2013] source mask rpix=1.7, npix_max = 19, mask sum = 13, frac = 0.672
[Wed May  1 04:49:03 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 7.39"
[Wed May  1 05:43:37 2013] fullrun_mos2_xmm0109141301_pi300-10000_cl_pass1_src3.ximg exists
[Wed May  1 05:43:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109141301_pi300-10000_cl_pass1_src3.csv
[Wed May  1 05:43:37 2013] fullrun_mos2_xmm0109141301_pi300-10000_cl_pass1_src3_1.ximg exists
[Wed May  1 05:43:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109141301_pi300-10000_cl_pass1_src3.csv
[Wed May  1 05:43:37 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109141301_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109141301_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  1 05:43:37 2013] fullrun_mos2_xmm0109141301_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Wed May  1 05:43:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109141301_pi300-10000_cl_pass1_tfrozen_src3.csv
[Wed May  1 05:43:37 2013] fullrun_mos2_xmm0109141301_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Wed May  1 05:43:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109141301_pi300-10000_cl_pass1_tfrozen_src3.csv
[Wed May  1 05:43:37 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109141301_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109141301_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  1 05:43:47 2013] Warning, spatial fit 3 centroid is now closest to src. 5
[Wed May  1 05:43:47 2013] Vigneting correction estimate = 1.000000
[Wed May  1 05:43:47 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  1 05:43:47 2013] Assessing source extent using major
[Wed May  1 05:43:47 2013] Source does appear to be extended
[Wed May  1 05:43:47 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  1 06:42:49 2013] Counts = 1587.420166, rescaling region sizes by 2.000000
[Wed May  1 06:42:49 2013] XMMSAS src. selection expression = ellipse(26803.067108, 28056.150665, 1305.000000, 1305.000000, 0.000000, X, Y)
[Wed May  1 06:42:49 2013] Writing source region out to fullrun_mos2_xmm0109141301_pi300-10000_pass1_cl_src6_src.reg
[Wed May  1 06:42:49 2013] Extracting stamp from image fullrun_mos2_xmm0109141301_pi300-10000_cl_sm2.00.img.gz, (234, 248) - (384, 398)
[Wed May  1 06:42:49 2013] XMMSAS bgd. selection expression = annulus(26803.067108, 28056.150665, 4350.000000, 8700.000000, X, Y) && !ellipse(25680.178200, 27936.154000, 1559.054445, 1355.911239, 115.860000, X, Y) && !ellipse(25990.028107, 28980.621246, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26155.970000, 28071.798000, 3536.520102, 3536.520102, 0.000000, X, Y) && !ellipse(34397.672211, 21103.525009, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32775.555511, 18878.955612, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19682.736526, 35196.982056, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30730.678497, 36824.634491, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32195.150177, 21010.151611, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22233.780960, 35919.417200, 576.464817, 332.511210, 332.375050, X, Y) && !ellipse(19982.328705, 24170.916199, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33783.882538, 29385.922089, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26259.245422, 37326.381927, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May  1 06:42:49 2013] Writing fullrun_mos2_xmm0109141301_pi300-10000_pass1_cl_src6.gif
[Wed May  1 06:48:54 2013] Mean detx,y = (47.29, 51.22) 
[Wed May  1 06:48:58 2013] Setting backscal keywords in source and bgd. spectrum
[Wed May  1 06:50:24 2013] Binned source spectrum to 10 counts/bin
[Wed May  1 06:50:24 2013] Setting source spectrum file to fullrun_mos2_xmm0109141301_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Wed May  1 06:50:24 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0109141301_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Wed May  1 07:31:11 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May  1 07:31:11 2013] rmf not generated due to insufficient counts
[Wed May  1 08:01:11 2013] Updating aperture counts using extracted products
[Wed May  1 08:01:11 2013] Total counts from fullrun_mos2_xmm0109141301_pi300-10000_pass1_cl_src6_src_b10.pi.gz = 619695.00
[Wed May  1 08:01:11 2013] Total counts from fullrun_mos2_xmm0109141301_pi300-10000_pass1_cl_src6_bgd.pi.gz = 18030.00
[Wed May  1 08:01:12 2013] Got source and background scale factors 1963743.000000, 52596503.000000
[Wed May  1 08:01:12 2013] User source parameters:
  Position = (308.6, 323.0) = 12 18 22.29 29 48 47.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 619021.8 +/- 788.2
  Background aperture counts = 673.2
  Rate = 5 +/- 0.007

[Wed May  1 08:01:12 2013] Updating counts from extracted products
[Wed May  1 08:01:12 2013] Set source signif. to 619021.83/25.95 = 23858.56
[Wed May  1 08:01:15 2013] Calculating source flux in energy range 0.30-8.00
[Wed May  1 08:01:15 2013] Using photon index=1.80, rate=5.49, arf fullrun_mos2_xmm0109141301_pi300-10000_pass1_cl_src6.arf
[Wed May  1 08:01:15 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May  1 08:01:15 2013] Updating source flux to 6.1e-11
[Wed May  1 08:01:17 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed May  1 08:01:20 2013] xmm0109141301/analysis//spectral/fullrun_mos2_xmm0109141301_pi300-10000_pass1_cl_src6_pl.csv not found, spectral fit skipped or did not complete