[Wed May  1 01:27:08 2013] Detection parameters:
  Position = (177.4, 468.2) = 12 19 6.24 29 59 24.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 174.8 +/- 27.1
  Background counts = 198.8
  Rate = 0.001 +/- 0.0002

[Wed May  1 01:27:10 2013] Off-axis axis estimate = 15.12'
[Wed May  1 02:11:40 2013] Using EEF radius (= 13.99 ")to estimate initial spatial extent for simple fitting
[Wed May  1 02:11:40 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May  1 02:11:40 2013] Initial guess for spatial extent in simple fitting = 13.99"
[Wed May  1 02:11:40 2013] source mask rpix=3.2, npix_max = 55, mask sum = 56, frac = 1.014
[Wed May  1 02:11:40 2013] Giving source the simple spatial ID 21 for pass 0, mean size = 13.99"
[Wed May  1 02:38:43 2013] fullrun_mos1_xmm0109141301_pi300-10000_cl_pass0_src21.ximg exists
[Wed May  1 02:38:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109141301_pi300-10000_cl_pass0_src21.csv
[Wed May  1 02:38:43 2013] fullrun_mos1_xmm0109141301_pi300-10000_cl_pass0_src21_1.ximg exists
[Wed May  1 02:38:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109141301_pi300-10000_cl_pass0_src21.csv
[Wed May  1 02:38:43 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109141301_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109141301_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  1 02:38:43 2013] fullrun_mos1_xmm0109141301_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Wed May  1 02:38:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109141301_pi300-10000_cl_pass0_tfrozen_src21.csv
[Wed May  1 02:38:43 2013] fullrun_mos1_xmm0109141301_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Wed May  1 02:38:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109141301_pi300-10000_cl_pass0_tfrozen_src21.csv
[Wed May  1 02:38:43 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109141301_pi300-10000_cl_pass0_tfrozen_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109141301_pi300-10000_cl_pass0_tfrozen_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  1 04:10:37 2013] Spatial fit model total counts = 720.346000, observed total counts = 638.000000
[Wed May  1 04:10:37 2013] Poor agreement between spatial fit and data for source 3
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed May  1 04:10:37 2013] Vigneting correction estimate = 1.000000
[Wed May  1 04:10:37 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  1 04:10:37 2013] Assessing source extent using major
[Wed May  1 04:10:37 2013] Source does appear to be extended
[Wed May  1 04:10:37 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  1 04:22:24 2013] Using EEF radius (= 13.99 ")to estimate initial spatial extent for simple fitting
[Wed May  1 04:22:24 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May  1 04:22:24 2013] Initial guess for spatial extent in simple fitting = 13.99"
[Wed May  1 04:22:24 2013] source mask rpix=3.2, npix_max = 55, mask sum = 56, frac = 1.014
[Wed May  1 04:22:24 2013] Giving source the simple spatial ID 21 for pass 1, mean size = 13.99"
[Wed May  1 04:49:02 2013] fullrun_mos1_xmm0109141301_pi300-10000_cl_pass1_src21.ximg exists
[Wed May  1 04:49:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109141301_pi300-10000_cl_pass1_src21.csv
[Wed May  1 04:49:02 2013] fullrun_mos1_xmm0109141301_pi300-10000_cl_pass1_src21_1.ximg exists
[Wed May  1 04:49:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109141301_pi300-10000_cl_pass1_src21.csv
[Wed May  1 04:49:02 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109141301_pi300-10000_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109141301_pi300-10000_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  1 04:49:03 2013] fullrun_mos1_xmm0109141301_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Wed May  1 04:49:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109141301_pi300-10000_cl_pass1_tfrozen_src21.csv
[Wed May  1 04:49:03 2013] fullrun_mos1_xmm0109141301_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Wed May  1 04:49:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109141301_pi300-10000_cl_pass1_tfrozen_src21.csv
[Wed May  1 04:49:03 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109141301_pi300-10000_cl_pass1_tfrozen_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109141301_pi300-10000_cl_pass1_tfrozen_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  1 05:43:43 2013] Spatial fit model total counts = 721.230000, observed total counts = 638.000000
[Wed May  1 05:43:43 2013] Poor agreement between spatial fit and data for source 3
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed May  1 05:43:43 2013] Vigneting correction estimate = 1.000000
[Wed May  1 05:43:43 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  1 05:43:43 2013] Assessing source extent using major
[Wed May  1 05:43:43 2013] Source does appear to be extended
[Wed May  1 05:43:43 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  1 06:22:56 2013] XMMSAS src. selection expression = ellipse(15381.003632, 40684.627594, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May  1 06:22:56 2013] Writing source region out to fullrun_mos1_xmm0109141301_pi300-10000_pass1_cl_src3_src.reg
[Wed May  1 06:22:56 2013] Extracting stamp from image fullrun_mos1_xmm0109141301_pi300-10000_cl_sm2.00.img.gz, (140, 431) - (215, 506)
[Wed May  1 06:22:56 2013] XMMSAS bgd. selection expression = annulus(15381.003632, 40684.627594, 1087.500000, 2175.000000, X, Y) && !ellipse(18373.850891, 39168.542145, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May  1 06:22:56 2013] Writing fullrun_mos1_xmm0109141301_pi300-10000_pass1_cl_src3.gif
[Wed May  1 06:29:24 2013] Mean detx,y = (16651.41, -204.83) 
[Wed May  1 06:29:25 2013] Setting backscal keywords in source and bgd. spectrum
[Wed May  1 06:29:35 2013] Binned source spectrum to 10 counts/bin
[Wed May  1 06:29:35 2013] Setting source spectrum file to fullrun_mos1_xmm0109141301_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed May  1 06:29:35 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0109141301_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Wed May  1 06:42:05 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May  1 06:42:05 2013] rmf not generated due to insufficient counts
[Wed May  1 08:01:10 2013] Updating aperture counts using extracted products
[Wed May  1 08:01:10 2013] Total counts from fullrun_mos1_xmm0109141301_pi300-10000_pass1_cl_src3_src_b10.pi.gz = 410.00
[Wed May  1 08:01:10 2013] Total counts from fullrun_mos1_xmm0109141301_pi300-10000_pass1_cl_src3_bgd.pi.gz = 1720.00
[Wed May  1 08:01:10 2013] Got source and background scale factors 1293724.000000, 6323806.000000
[Wed May  1 08:01:10 2013] User source parameters:
  Position = (177.4, 468.2) = 12 19 6.24 29 59 24.6
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 58.1 +/- 21.3
  Background aperture counts = 351.9
  Rate = 0.0005 +/- 0.0002

[Wed May  1 08:01:10 2013] Updating counts from extracted products
[Wed May  1 08:01:10 2013] Set source signif. to 58.12/18.76 = 3.10
[Wed May  1 08:01:11 2013] Calculating source flux in energy range 0.30-8.00
[Wed May  1 08:01:11 2013] Using photon index=1.80, rate=0.000545, arf fullrun_mos1_xmm0109141301_pi300-10000_pass1_cl_src3.arf
[Wed May  1 08:01:11 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May  1 08:01:11 2013] Updating source flux to 1.5e-14
[Wed May  1 08:01:15 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed May  1 08:01:17 2013] xmm0109141301/analysis//spectral/fullrun_mos1_xmm0109141301_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete