[Wed May 1 01:27:09 2013] Detection parameters: Position = (166.1, 175.9) = 12 19 9.85 29 38 11.6 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 139.8 +/- 22.1 Background counts = 122.6 Rate = 0.001 +/- 0.0002 [Wed May 1 01:27:10 2013] Off-axis axis estimate = 13.08' [Wed May 1 02:11:40 2013] Using EEF radius (= 12.97 ")to estimate initial spatial extent for simple fitting [Wed May 1 02:11:40 2013] Initial guess for spatial extent in simple fitting = 12.97" [Wed May 1 02:11:40 2013] source mask rpix=3.0, npix_max = 48, mask sum = 41, frac = 0.846 [Wed May 1 02:11:40 2013] Giving source the simple spatial ID 24 for pass 0, mean size = 12.97" [Wed May 1 02:38:43 2013] fullrun_mos1_xmm0109141301_pi300-10000_cl_pass0_src24.ximg exists [Wed May 1 02:38:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109141301_pi300-10000_cl_pass0_src24.csv [Wed May 1 02:38:43 2013] fullrun_mos1_xmm0109141301_pi300-10000_cl_pass0_src24_1.ximg exists [Wed May 1 02:38:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109141301_pi300-10000_cl_pass0_src24.csv [Wed May 1 02:38:43 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0109141301_pi300-10000_cl_pass0_src24_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0109141301_pi300-10000_cl_pass0_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 1 02:38:43 2013] fullrun_mos1_xmm0109141301_pi300-10000_cl_pass0_tfrozen_src24.ximg exists [Wed May 1 02:38:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109141301_pi300-10000_cl_pass0_tfrozen_src24.csv [Wed May 1 02:38:43 2013] fullrun_mos1_xmm0109141301_pi300-10000_cl_pass0_tfrozen_src24_1.ximg exists [Wed May 1 02:38:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109141301_pi300-10000_cl_pass0_tfrozen_src24.csv [Wed May 1 02:38:43 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0109141301_pi300-10000_cl_pass0_tfrozen_src24_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0109141301_pi300-10000_cl_pass0_tfrozen_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 1 04:10:37 2013] Source 27 is offset by 6.716670 and -1.157980 pixels which is larger than 2 X fitted extent = 1.464653 x 1.464653, not incorporating fit results [Wed May 1 04:10:37 2013] Source 27 is offset by 4.245935 and -3.919037 pixels which is larger than 2 X fitted extent = 1.490524 x 1.490524, not incorporating fit results [Wed May 1 04:10:37 2013] Vigneting correction estimate = 1.000000 [Wed May 1 04:10:37 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed May 1 04:10:37 2013] Assessing source extent using major [Wed May 1 04:10:37 2013] Source does appear to be extended [Wed May 1 04:10:37 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Wed May 1 04:22:24 2013] Using EEF radius (= 12.97 ")to estimate initial spatial extent for simple fitting [Wed May 1 04:22:24 2013] Initial guess for spatial extent in simple fitting = 12.97" [Wed May 1 04:22:24 2013] source mask rpix=3.0, npix_max = 48, mask sum = 41, frac = 0.846 [Wed May 1 04:22:24 2013] Giving source the simple spatial ID 24 for pass 1, mean size = 12.97" [Wed May 1 04:49:02 2013] fullrun_mos1_xmm0109141301_pi300-10000_cl_pass1_src24.ximg exists [Wed May 1 04:49:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109141301_pi300-10000_cl_pass1_src24.csv [Wed May 1 04:49:02 2013] fullrun_mos1_xmm0109141301_pi300-10000_cl_pass1_src24_1.ximg exists [Wed May 1 04:49:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109141301_pi300-10000_cl_pass1_src24.csv [Wed May 1 04:49:02 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0109141301_pi300-10000_cl_pass1_src24_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0109141301_pi300-10000_cl_pass1_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 1 04:49:03 2013] fullrun_mos1_xmm0109141301_pi300-10000_cl_pass1_tfrozen_src24.ximg exists [Wed May 1 04:49:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109141301_pi300-10000_cl_pass1_tfrozen_src24.csv [Wed May 1 04:49:03 2013] fullrun_mos1_xmm0109141301_pi300-10000_cl_pass1_tfrozen_src24_1.ximg exists [Wed May 1 04:49:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109141301_pi300-10000_cl_pass1_tfrozen_src24.csv [Wed May 1 04:49:03 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0109141301_pi300-10000_cl_pass1_tfrozen_src24_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0109141301_pi300-10000_cl_pass1_tfrozen_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 1 05:43:43 2013] Source 27 is offset by 6.598119 and -1.133405 pixels which is larger than 2 X fitted extent = 1.442625 x 1.442625, not incorporating fit results [Wed May 1 05:43:43 2013] Spatial fit model total counts = 459.461000, observed total counts = 345.000000 [Wed May 1 05:43:43 2013] Poor agreement between spatial fit and data for source 27 It may help to tweak spatial fit manually Not incorporating fit results [Wed May 1 05:43:43 2013] Vigneting correction estimate = 1.000000 [Wed May 1 05:43:43 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed May 1 05:43:43 2013] Assessing source extent using major [Wed May 1 05:43:43 2013] Source does appear to be extended [Wed May 1 05:43:43 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Wed May 1 06:22:56 2013] XMMSAS src. selection expression = ellipse(14401.790329, 15251.383774, 652.500000, 652.500000, 0.000000, X, Y) [Wed May 1 06:22:56 2013] Writing source region out to fullrun_mos1_xmm0109141301_pi300-10000_pass1_cl_src27_src.reg [Wed May 1 06:22:56 2013] Extracting stamp from image fullrun_mos1_xmm0109141301_pi300-10000_cl_sm2.00.img.gz, (129, 138) - (204, 213) [Wed May 1 06:22:56 2013] XMMSAS bgd. selection expression = annulus(14401.790329, 15251.383774, 1087.500000, 2175.000000, X, Y) && !ellipse(14812.618942, 16319.171509, 870.000000, 870.000000, 0.000000, X, Y) [Wed May 1 06:22:56 2013] Writing fullrun_mos1_xmm0109141301_pi300-10000_pass1_cl_src27.gif [Wed May 1 06:30:10 2013] Mean detx,y = (-2382.47, -16859.79) [Wed May 1 06:30:11 2013] Setting backscal keywords in source and bgd. spectrum [Wed May 1 06:30:21 2013] Binned source spectrum to 10 counts/bin [Wed May 1 06:30:22 2013] Setting source spectrum file to fullrun_mos1_xmm0109141301_pi300-10000_pass1_cl_src27_src_b10.pi.gz [Wed May 1 06:30:22 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0109141301_pi300-10000_pass1_cl_src27_bgd.pi.gz [Wed May 1 06:42:23 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Wed May 1 06:42:23 2013] rmf not generated due to insufficient counts [Wed May 1 08:01:10 2013] Updating aperture counts using extracted products [Wed May 1 08:01:10 2013] Total counts from fullrun_mos1_xmm0109141301_pi300-10000_pass1_cl_src27_src_b10.pi.gz = 219.00 [Wed May 1 08:01:10 2013] Total counts from fullrun_mos1_xmm0109141301_pi300-10000_pass1_cl_src27_bgd.pi.gz = 1061.00 [Wed May 1 08:01:10 2013] Got source and background scale factors 881568.000000, 4277846.000000 [Wed May 1 08:01:10 2013] User source parameters: Position = (166.1, 175.9) = 12 19 9.85 29 38 11.6 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 0.4 +/- 15.8 Background aperture counts = 218.6 Rate = 3e-06 +/- 0.0001 [Wed May 1 08:01:10 2013] Updating counts from extracted products [Wed May 1 08:01:10 2013] Set source signif. to 0.35/14.79 = 0.02 [Wed May 1 08:01:11 2013] Calculating source flux in energy range 0.30-8.00 [Wed May 1 08:01:11 2013] Using photon index=1.80, rate=3.3e-06, arf fullrun_mos1_xmm0109141301_pi300-10000_pass1_cl_src27.arf [Wed May 1 08:01:11 2013] Assuming count rate is from the 0.30-10.00 bandpass [Wed May 1 08:01:11 2013] Updating source flux to 1.3e-16 [Wed May 1 08:01:15 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Wed May 1 08:01:17 2013] xmm0109141301/analysis//spectral/fullrun_mos1_xmm0109141301_pi300-10000_pass1_cl_src27_pl.csv not found, spectral fit skipped or did not complete