[Fri Dec 16 19:43:35 2011] Detection parameters: Position = (467.5, 352.8) = 23 4 0.39 -8 37 56.4 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 67.7 +/- 10.2 Background counts = 2.5 Rate = 0.006 +/- 0.001 [Fri Dec 16 19:43:35 2011] Off-axis axis estimate = 12.87' [Fri Dec 16 19:58:22 2011] Using EEF radius (= 12.86 ")to estimate initial spatial extent for simple fitting [Fri Dec 16 19:58:22 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Fri Dec 16 19:58:22 2011] Initial guess for spatial extent in simple fitting = 12.86" [Fri Dec 16 19:58:22 2011] source mask rpix=3.0, npix_max = 47, mask sum = 49, frac = 1.025 [Fri Dec 16 19:58:22 2011] Giving source the simple spatial ID 4 for pass 0, mean size = 12.86" [Fri Dec 16 20:24:48 2011] fullrun_mos2_xmm0109130701_pi300-10000_cl_pass0_src4.ximg exists [Fri Dec 16 20:24:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109130701_pi300-10000_cl_pass0_src4.csv [Fri Dec 16 20:24:48 2011] fullrun_mos2_xmm0109130701_pi300-10000_cl_pass0_src4_1.ximg exists [Fri Dec 16 20:24:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109130701_pi300-10000_cl_pass0_src4.csv [Fri Dec 16 20:24:48 2011] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0109130701_pi300-10000_cl_pass0_src4_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0109130701_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri Dec 16 20:24:48 2011] fullrun_mos2_xmm0109130701_pi300-10000_cl_pass0_tfrozen_src4.ximg exists [Fri Dec 16 20:24:48 2011] fullrun_mos2_xmm0109130701_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists [Fri Dec 16 20:24:48 2011] Fit fullrun_mos2_xmm0109130701_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly [Fri Dec 16 20:24:51 2011] Spatial fit model total counts = 91.982300, observed total counts = 92.000000 [Fri Dec 16 20:24:51 2011] Offset between fit and detection position for source 7 = 0.346379 pixels [Fri Dec 16 20:24:51 2011] 91.426700 total counts/ 50.907700 bgd. counts: snr = 5.678936 Spatial fit parameters: Offset between fit and detection position for source 7 = 0.346379 pixels Position = (467.2, 352.5) = 23 4 0.47 -8 37 56.9 Extent = 4.5 (3.3-6.6)", rotation angle = 0 Source counts = 40.5 +/- 9.6 Background counts = 50.9 Rate = 0.004 +/- 0.0009 [Fri Dec 16 20:24:51 2011] Vigneting correction estimate = 1.000000 [Fri Dec 16 20:24:51 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Fri Dec 16 20:24:51 2011] Assessing source extent using major axis lower bound [Fri Dec 16 20:24:51 2011] Source does appear to be extended [Fri Dec 16 20:24:51 2011] Computing asymmetry using major and minor axis, asym = 1.00 [Fri Dec 16 20:24:51 2011] Deleting source due to low Poisson probability 0.9