[Fri Dec 16 19:43:35 2011] Detection parameters:
  Position = (320.9, 308.0) = 23 4 43.38 -8 41 11.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 56747.8 +/- 280.4
  Background counts = 4.8
  Rate = 6 +/- 0.03

[Fri Dec 16 19:43:35 2011] Off-axis axis estimate = 1.77'
[Fri Dec 16 19:58:22 2011] Using EEF radius (= 7.31 ")to estimate initial spatial extent for simple fitting
[Fri Dec 16 19:58:22 2011] Initial guess for spatial extent in simple fitting = 7.31"
[Fri Dec 16 19:58:22 2011] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.841
[Fri Dec 16 19:58:22 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.31"
[Fri Dec 16 20:24:48 2011] fullrun_mos2_xmm0109130701_pi300-10000_cl_pass0_src1.ximg exists
[Fri Dec 16 20:24:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109130701_pi300-10000_cl_pass0_src1.csv
[Fri Dec 16 20:24:48 2011] fullrun_mos2_xmm0109130701_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Dec 16 20:24:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109130701_pi300-10000_cl_pass0_src1.csv
[Fri Dec 16 20:24:48 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109130701_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109130701_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 16 20:24:48 2011] fullrun_mos2_xmm0109130701_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Dec 16 20:24:48 2011] fullrun_mos2_xmm0109130701_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Dec 16 20:24:48 2011] Fit fullrun_mos2_xmm0109130701_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Dec 16 20:24:51 2011] Spatial fit model total counts = 49621.100000, observed total counts = 49667.000000
[Fri Dec 16 20:24:51 2011] Offset between fit and detection position for source 2 = 0.141199 pixels
[Fri Dec 16 20:24:51 2011] 49500.750000 total counts/ 9344.850000 bgd. counts: snr = 415.396848
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.141199 pixels
  Position = (320.7, 308.0) = 23 4 43.42 -8 41 10.9
  Extent = 5.6 (5.6-5.6)", rotation angle = 0
  Source counts = 40155.9 +/- 222.5
  Background counts = 9344.9
  Rate = 4 +/- 0.02
[Fri Dec 16 20:24:51 2011] Vigneting correction estimate = 1.000000
[Fri Dec 16 20:24:51 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 16 20:24:51 2011] Assessing source extent using major axis lower bound
[Fri Dec 16 20:24:51 2011] Source does appear to be extended
[Fri Dec 16 20:24:51 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 16 20:32:51 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Dec 16 20:32:51 2011] Initial guess for spatial extent in simple fitting = 5.60"
[Fri Dec 16 20:32:51 2011] source mask rpix=1.3, npix_max = 12, mask sum = 16, frac = 1.253
[Fri Dec 16 20:32:51 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 5.60"
[Fri Dec 16 20:46:02 2011] fullrun_mos2_xmm0109130701_pi300-10000_cl_pass1_src1.ximg exists
[Fri Dec 16 20:46:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109130701_pi300-10000_cl_pass1_src1.csv
[Fri Dec 16 20:46:02 2011] fullrun_mos2_xmm0109130701_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Dec 16 20:46:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109130701_pi300-10000_cl_pass1_src1.csv
[Fri Dec 16 20:46:02 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109130701_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109130701_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 16 20:46:02 2011] fullrun_mos2_xmm0109130701_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Dec 16 20:46:02 2011] fullrun_mos2_xmm0109130701_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Dec 16 20:46:02 2011] Fit fullrun_mos2_xmm0109130701_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Dec 16 20:46:04 2011] Spatial fit model total counts = 49665.300000, observed total counts = 49700.000000
[Fri Dec 16 20:46:04 2011] Offset between fit and detection position for source 2 = 0.016050 pixels
[Fri Dec 16 20:46:04 2011] 49748.540000 total counts/ 9822.740000 bgd. counts: snr = 402.844374
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.016050 pixels
  Position = (320.7, 308.0) = 23 4 43.43 -8 41 10.8
  Extent = 5.6 (5.5-5.6)", rotation angle = 0
  Source counts = 39925.8 +/- 223.0
  Background counts = 9822.7
  Rate = 4 +/- 0.02
[Fri Dec 16 20:46:04 2011] Vigneting correction estimate = 1.000000
[Fri Dec 16 20:46:04 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 16 20:46:04 2011] Assessing source extent using major axis lower bound
[Fri Dec 16 20:46:04 2011] Source does appear to be extended
[Fri Dec 16 20:46:04 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 16 20:54:17 2011] Counts = 39925.800000, rescaling region sizes by 3.000000
[Fri Dec 16 20:54:17 2011] XMMSAS src. selection expression = ellipse(27855.168000, 26746.528800, 999.631829, 999.631829, 0.000000, X, Y)
[Fri Dec 16 20:54:17 2011] Writing source region out to fullrun_mos2_xmm0109130701_pi300-10000_pass1_cl_src2_src.reg
[Fri Dec 16 20:54:17 2011] Extracting stamp from image fullrun_mos2_xmm0109130701_pi300-10000_cl_sm2.00.img.gz, (263, 251) - (378, 365)
[Fri Dec 16 20:54:17 2011] XMMSAS bgd. selection expression = annulus(27855.168000, 26746.528800, 4998.159144, 9996.318288, X, Y)
[Fri Dec 16 20:54:17 2011] Writing fullrun_mos2_xmm0109130701_pi300-10000_pass1_cl_src2.gif
[Fri Dec 16 20:54:20 2011] Mean detx,y = (11.99, 110.96) 
[Fri Dec 16 20:54:21 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Dec 16 20:56:24 2011] Binned source spectrum to 10 counts/bin
[Fri Dec 16 20:56:24 2011] Setting source spectrum file to fullrun_mos2_xmm0109130701_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Dec 16 20:56:24 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0109130701_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Fri Dec 16 20:59:51 2011] Updating aperture counts using extracted products
[Fri Dec 16 20:59:52 2011] Error reading totcts from fullrun_mos2_xmm0109130701_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Dec 16 20:59:52 2011] Calculating source flux in energy range 0.30-8.00
[Fri Dec 16 20:59:52 2011] Using photon index=1.80, rate=3.77, arf fullrun_mos2_xmm0109130701_pi300-10000_pass1_cl_src2.arf
[Fri Dec 16 20:59:52 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Dec 16 20:59:52 2011] Updating source flux to 3.7e-11
[Fri Dec 16 21:00:03 2011] Reading fit data from xmm0109130701/analysis//spectral/fullrun_mos2_xmm0109130701_pi300-10000_pass1_cl_src2_pl.csv
[Fri Dec 16 21:00:03 2011] Spectral fit parameter nH value = 1.60995e+20
[Fri Dec 16 21:00:03 2011] Spectral fit parameter PhoIndex value = 1.78099
[Fri Dec 16 21:00:03 2011] Failed to get F(0.3-8.0) from xmm0109130701/analysis//spectral/fullrun_mos2_xmm0109130701_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Fri Dec 16 21:00:03 2011] Calculating source flux in energy range 0.30-8.00
[Fri Dec 16 21:00:03 2011] Using Nh = 1.6e+20, photon index=1.78, rate=3.77, arf fullrun_mos2_xmm0109130701_pi300-10000_pass1_cl_src2.arf
[Fri Dec 16 21:00:03 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Dec 16 21:00:03 2011] Updating source flux to 3.8e-11