[Thu Sep  6 10:37:06 2012] Detection parameters:
  Position = (137.9, 286.8) = 5 59 4.64 -38 22 28.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 151.7 +/- 27.9
  Background counts = 222.7
  Rate = 0.03 +/- 0.006

[Thu Sep  6 10:37:07 2012] Off-axis axis estimate = 11.67'
[Thu Sep  6 10:39:09 2012] Using EEF radius (= 12.26 ")to estimate initial spatial extent for simple fitting
[Thu Sep  6 10:39:09 2012] Initial guess for spatial extent in simple fitting = 12.26"
[Thu Sep  6 10:39:09 2012] source mask rpix=2.8, npix_max = 44, mask sum = 36, frac = 0.817
[Thu Sep  6 10:39:09 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 12.26"
[Thu Sep  6 12:18:57 2012] fullrun_pn_xmm0109130501_pi300-10000_cl_pass0_src4.ximg exists
[Thu Sep  6 12:18:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109130501_pi300-10000_cl_pass0_src4.csv
[Thu Sep  6 12:18:57 2012] fullrun_pn_xmm0109130501_pi300-10000_cl_pass0_src4_1.ximg exists
[Thu Sep  6 12:18:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109130501_pi300-10000_cl_pass0_src4.csv
[Thu Sep  6 12:18:57 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109130501_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109130501_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep  6 12:18:58 2012] fullrun_pn_xmm0109130501_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Thu Sep  6 12:18:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109130501_pi300-10000_cl_pass0_tfrozen_src4.csv
[Thu Sep  6 12:18:58 2012] fullrun_pn_xmm0109130501_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Thu Sep  6 12:18:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109130501_pi300-10000_cl_pass0_tfrozen_src4.csv
[Thu Sep  6 12:18:58 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109130501_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109130501_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep  6 12:21:04 2012] Spatial fit model total counts = 1125.470000, observed total counts = 1030.000000
[Thu Sep  6 12:21:04 2012] Offset between fit and detection position for source 5 = 3.487865 pixels
[Thu Sep  6 12:21:04 2012] Warning, changing simple spatial fit ID from 4 to 3
[Thu Sep  6 12:21:04 2012] 1093.807000 total counts/ 791.975000 bgd. counts: snr = 10.725302
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 3.487865 pixels
  Position = (135.2, 289.1) = 5 59 5.63 -38 22 20.9
  Extent = 24.9 (24.8-49.8)", rotation angle = 0
  Source counts = 301.8 +/- 33.1
  Background counts = 792.0
  Rate = 0.2 +/- 0.03
[Thu Sep  6 12:21:04 2012] Vigneting correction estimate = 1.000000
[Thu Sep  6 12:21:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep  6 12:21:04 2012] Assessing source extent using major axis lower bound
[Thu Sep  6 12:21:04 2012] Source does appear to be extended
[Thu Sep  6 12:21:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep  6 12:21:04 2012] Source is confused with source 3
[Thu Sep  6 12:21:12 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Sep  6 12:21:12 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Sep  6 12:21:12 2012] Initial guess for spatial extent in simple fitting = 24.89"
[Thu Sep  6 12:21:12 2012] source mask rpix=5.7, npix_max = 154, mask sum = 115, frac = 0.743
[Thu Sep  6 12:21:12 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 24.89"
[Thu Sep  6 13:48:18 2012] fullrun_pn_xmm0109130501_pi300-10000_cl_pass1_src4.ximg exists
[Thu Sep  6 13:48:18 2012] fullrun_pn_xmm0109130501_pi300-10000_cl_pass1_src4_1.ximg exists
[Thu Sep  6 13:48:18 2012] Fit fullrun_pn_xmm0109130501_pi300-10000_cl_pass1_src4 appears to have run properly
[Thu Sep  6 13:48:18 2012] fullrun_pn_xmm0109130501_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Thu Sep  6 13:48:18 2012] fullrun_pn_xmm0109130501_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Thu Sep  6 13:48:18 2012] Fit fullrun_pn_xmm0109130501_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Thu Sep  6 13:50:30 2012] Spatial fit model total counts = 1112.540000, observed total counts = 1030.000000
[Thu Sep  6 13:50:30 2012] Offset between fit and detection position for source 5 = 2.425624 pixels
[Thu Sep  6 13:50:30 2012] Warning, changing simple spatial fit ID from 4 to 3
[Thu Sep  6 13:50:30 2012] 1089.729000 total counts/ 856.138000 bgd. counts: snr = 7.983333
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 2.425624 pixels
  Position = (133.0, 288.0) = 5 59 6.44 -38 22 25.6
  Extent = 49.4" x 12.3", rotation angle = 355
  Source counts = 233.6 +/- 33.0
  Background counts = 856.1
  Rate = 0.2 +/- 0.03
[Thu Sep  6 13:50:30 2012] Vigneting correction estimate = 1.000000
[Thu Sep  6 13:50:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep  6 13:50:30 2012] Assessing source extent using major
[Thu Sep  6 13:50:30 2012] Source does appear to be extended
[Thu Sep  6 13:50:30 2012] Computing asymmetry using major and minor axis, asym = 4.04
[Thu Sep  6 13:50:30 2012] Source is asymmetric
[Thu Sep  6 13:50:37 2012] XMMSAS src. selection expression = ellipse(11526.515204, 25006.616267, 2966.665059, 735.073091, 354.815196, X, Y)
[Thu Sep  6 13:50:37 2012] Writing source region out to fullrun_pn_xmm0109130501_pi300-10000_pass1_cl_src5_src.reg
[Thu Sep  6 13:50:37 2012] Extracting stamp from image fullrun_pn_xmm0109130501_pi300-10000_cl_sm2.00.img.gz, (0, 117) - (304, 458)
[Thu Sep  6 13:50:37 2012] XMMSAS bgd. selection expression = annulus(11526.515204, 25006.616267, 4944.441765, 9888.883530, X, Y) && !ellipse(18773.466000, 26560.920400, 1451.936042, 1451.936042, 0.000000, X, Y) && !ellipse(14120.795303, 25571.006073, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12076.222000, 24954.093400, 3982.224115, 916.368026, 353.618000, X, Y) && !ellipse(11523.073486, 24768.125214, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19616.770996, 26724.159637, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21842.097076, 26586.568054, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17061.868164, 26184.694855, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18478.721893, 26216.722473, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17729.466000, 26366.829400, 1451.936042, 1451.936042, 0.000000, X, Y) && !ellipse(14260.923767, 17940.323105, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15866.536804, 25938.305481, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17588.096298, 25970.067596, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17729.272171, 25306.257172, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13432.099289, 25418.920685, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14850.341599, 25357.762085, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16211.179520, 25441.286652, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14487.195984, 24928.488983, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13063.903809, 24409.967072, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13340.884430, 24048.585724, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12455.587479, 23794.478180, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10334.876190, 17169.998215, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Sep  6 13:50:37 2012] Writing fullrun_pn_xmm0109130501_pi300-10000_pass1_cl_src5.gif
[Thu Sep  6 13:54:09 2012] Mean detx,y = (-14959.01, -511.98) 
[Thu Sep  6 13:54:10 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Sep  6 13:55:44 2012] grppha failed
[Thu Sep  6 13:55:45 2012] Setting source spectrum file to fullrun_pn_xmm0109130501_pi300-10000_pass1_cl_src5_src.pi.gz
[Thu Sep  6 13:55:45 2012] Setting bgd. spectrum file to fullrun_pn_xmm0109130501_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Thu Sep  6 14:09:25 2012] Updating aperture counts using extracted products
[Thu Sep  6 14:09:25 2012] Error reading totcts from fullrun_pn_xmm0109130501_pi300-10000_pass1_cl_src5_src.pi.gz
[Thu Sep  6 14:09:25 2012] No arf file for this source, not re-computing flux
[Thu Sep  6 14:09:28 2012] Flag c found in src. 5 procflags, skipping spectral fitting
[Thu Sep  6 14:09:28 2012] Source 5 has no response, skipping
[Thu Sep  6 14:09:29 2012] xmm0109130501/analysis//spectral/fullrun_pn_xmm0109130501_pi300-10000_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete