[Thu Sep  6 10:37:07 2012] Detection parameters:
  Position = (186.9, 293.0) = 5 58 46.52 -38 22 5.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 174.3 +/- 28.2
  Background counts = 258.3
  Rate = 0.04 +/- 0.006

[Thu Sep  6 10:37:07 2012] Off-axis axis estimate = 8.10'
[Thu Sep  6 10:39:09 2012] Using EEF radius (= 10.48 ")to estimate initial spatial extent for simple fitting
[Thu Sep  6 10:39:09 2012] Initial guess for spatial extent in simple fitting = 10.48"
[Thu Sep  6 10:39:09 2012] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.064
[Thu Sep  6 10:39:09 2012] Giving source the simple spatial ID 25 for pass 0, mean size = 10.48"
[Thu Sep  6 12:18:57 2012] fullrun_pn_xmm0109130501_pi300-10000_cl_pass0_src25.ximg exists
[Thu Sep  6 12:18:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109130501_pi300-10000_cl_pass0_src25.csv
[Thu Sep  6 12:18:57 2012] fullrun_pn_xmm0109130501_pi300-10000_cl_pass0_src25_1.ximg exists
[Thu Sep  6 12:18:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109130501_pi300-10000_cl_pass0_src25.csv
[Thu Sep  6 12:18:57 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109130501_pi300-10000_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109130501_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep  6 12:18:58 2012] fullrun_pn_xmm0109130501_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Thu Sep  6 12:18:58 2012] fullrun_pn_xmm0109130501_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Thu Sep  6 12:18:59 2012] Fit fullrun_pn_xmm0109130501_pi300-10000_cl_pass0_tfrozen_src25 appears to have run properly
[Thu Sep  6 12:21:04 2012] Spatial fit model total counts = 1131.530000, observed total counts = 945.000000
[Thu Sep  6 12:21:04 2012] Poor agreement between spatial fit and data for source 27
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Sep  6 12:21:04 2012] Warning, spatial fit 25 centroid is now closest to src. 15
[Thu Sep  6 12:21:04 2012] Vigneting correction estimate = 1.000000
[Thu Sep  6 12:21:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep  6 12:21:04 2012] Assessing source extent using major
[Thu Sep  6 12:21:04 2012] Source does appear to be extended
[Thu Sep  6 12:21:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep  6 12:21:04 2012] Source is confused with source 20
[Thu Sep  6 12:21:12 2012] Using EEF radius (= 10.48 ")to estimate initial spatial extent for simple fitting
[Thu Sep  6 12:21:12 2012] Initial guess for spatial extent in simple fitting = 10.48"
[Thu Sep  6 12:21:12 2012] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.064
[Thu Sep  6 12:21:12 2012] Giving source the simple spatial ID 22 for pass 1, mean size = 10.48"
[Thu Sep  6 13:48:18 2012] fullrun_pn_xmm0109130501_pi300-10000_cl_pass1_src22.ximg exists
[Thu Sep  6 13:48:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109130501_pi300-10000_cl_pass1_src22.csv
[Thu Sep  6 13:48:18 2012] fullrun_pn_xmm0109130501_pi300-10000_cl_pass1_src22_1.ximg exists
[Thu Sep  6 13:48:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109130501_pi300-10000_cl_pass1_src22.csv
[Thu Sep  6 13:48:18 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109130501_pi300-10000_cl_pass1_src22_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109130501_pi300-10000_cl_pass1_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep  6 13:48:19 2012] fullrun_pn_xmm0109130501_pi300-10000_cl_pass1_tfrozen_src22.ximg exists
[Thu Sep  6 13:48:19 2012] fullrun_pn_xmm0109130501_pi300-10000_cl_pass1_tfrozen_src22_1.ximg exists
[Thu Sep  6 13:48:19 2012] Fit fullrun_pn_xmm0109130501_pi300-10000_cl_pass1_tfrozen_src22 appears to have run properly
[Thu Sep  6 13:50:30 2012] Warning, spatial fit 22 centroid is now closest to src. 26
[Thu Sep  6 13:50:30 2012] Vigneting correction estimate = 1.000000
[Thu Sep  6 13:50:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep  6 13:50:30 2012] Assessing source extent using major
[Thu Sep  6 13:50:30 2012] Source does appear to be extended
[Thu Sep  6 13:50:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep  6 13:50:37 2012] XMMSAS src. selection expression = ellipse(16211.179520, 25441.286652, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Sep  6 13:50:37 2012] Writing source region out to fullrun_pn_xmm0109130501_pi300-10000_pass1_cl_src27_src.reg
[Thu Sep  6 13:50:37 2012] Extracting stamp from image fullrun_pn_xmm0109130501_pi300-10000_cl_sm2.00.img.gz, (149, 255) - (224, 330)
[Thu Sep  6 13:50:37 2012] XMMSAS bgd. selection expression = annulus(16211.179520, 25441.286652, 1087.500000, 2175.000000, X, Y) && !ellipse(18773.466000, 26560.920400, 1451.936042, 1451.936042, 0.000000, X, Y) && !ellipse(14120.795303, 25571.006073, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12076.222000, 24954.093400, 3982.224115, 916.368026, 353.618000, X, Y) && !ellipse(11526.515204, 25006.616267, 3955.553412, 980.097455, 354.815196, X, Y) && !ellipse(17061.868164, 26184.694855, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18478.721893, 26216.722473, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17729.466000, 26366.829400, 1451.936042, 1451.936042, 0.000000, X, Y) && !ellipse(15866.536804, 25938.305481, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17588.096298, 25970.067596, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17729.272171, 25306.257172, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13432.099289, 25418.920685, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14850.341599, 25357.762085, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14487.195984, 24928.488983, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13340.884430, 24048.585724, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Sep  6 13:50:37 2012] Writing fullrun_pn_xmm0109130501_pi300-10000_pass1_cl_src27.gif
[Thu Sep  6 14:02:55 2012] Mean detx,y = (-10640.50, -141.79) 
[Thu Sep  6 14:02:56 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Sep  6 14:03:06 2012] grppha failed
[Thu Sep  6 14:03:06 2012] Setting source spectrum file to fullrun_pn_xmm0109130501_pi300-10000_pass1_cl_src27_src.pi.gz
[Thu Sep  6 14:03:06 2012] Setting bgd. spectrum file to fullrun_pn_xmm0109130501_pi300-10000_pass1_cl_src27_bgd.pi.gz
[Thu Sep  6 14:06:44 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Sep  6 14:06:44 2012] rmf not generated due to insufficient counts
[Thu Sep  6 14:09:25 2012] Updating aperture counts using extracted products
[Thu Sep  6 14:09:25 2012] Error reading totcts from fullrun_pn_xmm0109130501_pi300-10000_pass1_cl_src27_src.pi.gz
[Thu Sep  6 14:09:25 2012] No arf file for this source, not re-computing flux
[Thu Sep  6 14:09:28 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Sep  6 14:09:29 2012] xmm0109130501/analysis//spectral/fullrun_pn_xmm0109130501_pi300-10000_pass1_cl_src27_pl.csv not found, spectral fit skipped or did not complete