[Sat Jul 21 10:12:52 2012] Detection parameters:
  Position = (469.6, 190.7) = 2 13 49.68 -0 54 45.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 32.4 +/- 7.6
  Background counts = 4.3
  Rate = 0.003 +/- 0.0007

[Sat Jul 21 10:12:52 2012] Off-axis axis estimate = 14.66'
[Sat Jul 21 10:46:23 2012] Using EEF radius (= 13.76 ")to estimate initial spatial extent for simple fitting
[Sat Jul 21 10:46:23 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jul 21 10:46:23 2012] Initial guess for spatial extent in simple fitting = 13.76"
[Sat Jul 21 10:46:23 2012] source mask rpix=3.2, npix_max = 53, mask sum = 49, frac = 0.913
[Sat Jul 21 10:46:23 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 13.76"
[Sat Jul 21 11:03:09 2012] fullrun_mos2_xmm0109130301_pi300-10000_cl_pass0_src7.ximg exists
[Sat Jul 21 11:03:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109130301_pi300-10000_cl_pass0_src7.csv
[Sat Jul 21 11:03:09 2012] fullrun_mos2_xmm0109130301_pi300-10000_cl_pass0_src7_1.ximg exists
[Sat Jul 21 11:03:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109130301_pi300-10000_cl_pass0_src7.csv
[Sat Jul 21 11:03:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109130301_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109130301_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 21 11:03:09 2012] fullrun_mos2_xmm0109130301_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Sat Jul 21 11:03:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109130301_pi300-10000_cl_pass0_tfrozen_src7.csv
[Sat Jul 21 11:03:09 2012] fullrun_mos2_xmm0109130301_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Sat Jul 21 11:03:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109130301_pi300-10000_cl_pass0_tfrozen_src7.csv
[Sat Jul 21 11:03:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109130301_pi300-10000_cl_pass0_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109130301_pi300-10000_cl_pass0_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 21 11:03:17 2012] Spatial fit model total counts = 88.991700, observed total counts = 78.000000
[Sat Jul 21 11:03:17 2012] Poor agreement between spatial fit and data for source 8
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jul 21 11:03:17 2012] Vigneting correction estimate = 1.000000
[Sat Jul 21 11:03:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 21 11:03:17 2012] Assessing source extent using major
[Sat Jul 21 11:03:17 2012] Source does appear to be extended
[Sat Jul 21 11:03:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 21 11:24:42 2012] Using EEF radius (= 13.76 ")to estimate initial spatial extent for simple fitting
[Sat Jul 21 11:24:42 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jul 21 11:24:42 2012] Initial guess for spatial extent in simple fitting = 13.76"
[Sat Jul 21 11:24:42 2012] source mask rpix=3.2, npix_max = 53, mask sum = 49, frac = 0.913
[Sat Jul 21 11:24:42 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 13.76"
[Sat Jul 21 11:42:41 2012] fullrun_mos2_xmm0109130301_pi300-10000_cl_pass1_src6.ximg exists
[Sat Jul 21 11:42:41 2012] fullrun_mos2_xmm0109130301_pi300-10000_cl_pass1_src6_1.ximg exists
[Sat Jul 21 11:42:41 2012] Fit fullrun_mos2_xmm0109130301_pi300-10000_cl_pass1_src6 appears to have run properly
[Sat Jul 21 11:42:42 2012] fullrun_mos2_xmm0109130301_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Sat Jul 21 11:42:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109130301_pi300-10000_cl_pass1_tfrozen_src6.csv
[Sat Jul 21 11:42:42 2012] fullrun_mos2_xmm0109130301_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Sat Jul 21 11:42:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109130301_pi300-10000_cl_pass1_tfrozen_src6.csv
[Sat Jul 21 11:42:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109130301_pi300-10000_cl_pass1_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109130301_pi300-10000_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 21 11:42:51 2012] Spatial fit model total counts = 83.033100, observed total counts = 78.000000
[Sat Jul 21 11:42:51 2012] Offset between fit and detection position for source 8 = 2.422921 pixels
[Sat Jul 21 11:42:51 2012] 80.164900 total counts/ 52.224900 bgd. counts: snr = 3.866229
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 2.422921 pixels
  Position = (470.5, 193.0) = 2 13 49.40 -0 54 35.9
  Extent = 18.6" x 3.7", rotation angle = 139
  Source counts = 27.9 +/- 9.0
  Background counts = 52.2
  Rate = 0.003 +/- 0.0008
[Sat Jul 21 11:42:51 2012] Vigneting correction estimate = 1.000000
[Sat Jul 21 11:42:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 21 11:42:51 2012] Assessing source extent using major
[Sat Jul 21 11:42:51 2012] Source does appear to be extended
[Sat Jul 21 11:42:51 2012] Computing asymmetry using major and minor axis, asym = 5.03
[Sat Jul 21 11:42:51 2012] Source is asymmetric
[Sat Jul 21 12:28:25 2012] XMMSAS src. selection expression = ellipse(40888.251418, 16739.818794, 1117.897516, 222.307583, 138.633682, X, Y)
[Sat Jul 21 12:28:25 2012] Writing source region out to fullrun_mos2_xmm0109130301_pi300-10000_pass1_cl_src8_src.reg
[Sat Jul 21 12:28:25 2012] Extracting stamp from image fullrun_mos2_xmm0109130301_pi300-10000_cl_sm2.00.img.gz, (406, 129) - (535, 257)
[Sat Jul 21 12:28:25 2012] XMMSAS bgd. selection expression = annulus(40888.251418, 16739.818794, 1863.162527, 3726.325054, X, Y)
[Sat Jul 21 12:28:25 2012] Writing fullrun_mos2_xmm0109130301_pi300-10000_pass1_cl_src8.gif
[Sat Jul 21 12:33:28 2012] Mean detx,y = (-15956.37, -4084.15) 
[Sat Jul 21 12:33:29 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 21 12:34:02 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 21 12:34:02 2012] Setting source spectrum file to fullrun_mos2_xmm0109130301_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Sat Jul 21 12:34:02 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0109130301_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Sat Jul 21 12:39:56 2012] Not generating rmf since there are only 27 counts
[Sat Jul 21 12:39:56 2012] rmf not generated due to insufficient counts
[Sat Jul 21 12:40:36 2012] Updating aperture counts using extracted products
[Sat Jul 21 12:40:36 2012] Error reading totcts from fullrun_mos2_xmm0109130301_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Sat Jul 21 12:40:37 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 21 12:40:37 2012] Using photon index=1.80, rate=0.00259, arf fullrun_mos2_xmm0109130301_pi300-10000_pass1_cl_src8.arf
[Sat Jul 21 12:40:37 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 21 12:40:37 2012] Updating source flux to 7.3e-14
[Sat Jul 21 12:41:00 2012] Flag p found in src. 8 procflags, skipping spectral fitting
[Sat Jul 21 12:41:00 2012] Source 8 has fewer than 100.000000 counts, skipping spectral fitting