[Sat Jul 21 10:12:25 2012] Detection parameters:
  Position = (265.1, 245.5) = 2 14 48.99 -0 50 42.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 25.8 +/- 6.2
  Background counts = 6.1
  Rate = 0.005 +/- 0.001

[Sat Jul 21 10:12:25 2012] Off-axis axis estimate = 4.54'
[Sat Jul 21 10:22:27 2012] Using EEF radius (= 8.70 ")to estimate initial spatial extent for simple fitting
[Sat Jul 21 10:22:27 2012] Initial guess for spatial extent in simple fitting = 8.70"
[Sat Jul 21 10:22:27 2012] source mask rpix=2.0, npix_max = 24, mask sum = 22, frac = 0.880
[Sat Jul 21 10:22:27 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 8.70"
[Sat Jul 21 10:46:22 2012] fullrun_mos1_xmm0109130301_pi300-10000_cl_pass0_src5.ximg exists
[Sat Jul 21 10:46:22 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0109130301_pi300-10000_cl_pass0_src5.csv
[Sat Jul 21 10:46:22 2012] fullrun_mos1_xmm0109130301_pi300-10000_cl_pass0_src5_1.ximg exists
[Sat Jul 21 10:46:22 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0109130301_pi300-10000_cl_pass0_src5.csv
[Sat Jul 21 10:46:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109130301_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109130301_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 21 10:46:22 2012] fullrun_mos1_xmm0109130301_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Sat Jul 21 10:46:22 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0109130301_pi300-10000_cl_pass0_tfrozen_src5.csv
[Sat Jul 21 10:46:22 2012] fullrun_mos1_xmm0109130301_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Sat Jul 21 10:46:22 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0109130301_pi300-10000_cl_pass0_tfrozen_src5.csv
[Sat Jul 21 10:46:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109130301_pi300-10000_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109130301_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 21 11:03:13 2012] Spatial fit model total counts = -115.096000, observed total counts = 64.000000
[Sat Jul 21 11:03:13 2012] Poor agreement between spatial fit and data for source 9
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jul 21 11:03:13 2012] Vigneting correction estimate = 1.000000
[Sat Jul 21 11:03:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 21 11:03:13 2012] Assessing source extent using major
[Sat Jul 21 11:03:13 2012] Source does appear to be extended
[Sat Jul 21 11:03:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 21 11:05:00 2012] Using EEF radius (= 8.70 ")to estimate initial spatial extent for simple fitting
[Sat Jul 21 11:05:00 2012] Initial guess for spatial extent in simple fitting = 8.70"
[Sat Jul 21 11:05:00 2012] source mask rpix=2.0, npix_max = 24, mask sum = 22, frac = 0.880
[Sat Jul 21 11:05:00 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 8.70"
[Sat Jul 21 11:24:42 2012] fullrun_mos1_xmm0109130301_pi300-10000_cl_pass1_src5.ximg exists
[Sat Jul 21 11:24:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109130301_pi300-10000_cl_pass1_src5.csv
[Sat Jul 21 11:24:42 2012] fullrun_mos1_xmm0109130301_pi300-10000_cl_pass1_src5_1.ximg exists
[Sat Jul 21 11:24:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109130301_pi300-10000_cl_pass1_src5.csv
[Sat Jul 21 11:24:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109130301_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109130301_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 21 11:24:42 2012] fullrun_mos1_xmm0109130301_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Sat Jul 21 11:24:42 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0109130301_pi300-10000_cl_pass1_tfrozen_src5.csv
[Sat Jul 21 11:24:42 2012] fullrun_mos1_xmm0109130301_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Sat Jul 21 11:24:42 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0109130301_pi300-10000_cl_pass1_tfrozen_src5.csv
[Sat Jul 21 11:24:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109130301_pi300-10000_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109130301_pi300-10000_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 21 11:42:48 2012] Source 9 is offset by -7.916025 and 0.933547 pixels which is larger than
2 X fitted extent = 1.000667 x 1.000667, not incorporating fit results
[Sat Jul 21 11:42:48 2012] Vigneting correction estimate = 1.000000
[Sat Jul 21 11:42:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 21 11:42:48 2012] Assessing source extent using major
[Sat Jul 21 11:42:48 2012] Source does appear to be extended
[Sat Jul 21 11:42:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 21 12:15:45 2012] XMMSAS src. selection expression = ellipse(23013.073853, 21305.824966, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jul 21 12:15:45 2012] Writing source region out to fullrun_mos1_xmm0109130301_pi300-10000_pass1_cl_src9_src.reg
[Sat Jul 21 12:15:45 2012] Extracting stamp from image fullrun_mos1_xmm0109130301_pi300-10000_cl_sm2.00.img.gz, (228, 208) - (303, 283)
[Sat Jul 21 12:15:45 2012] XMMSAS bgd. selection expression = annulus(23013.073853, 21305.824966, 1087.500000, 2175.000000, X, Y)
[Sat Jul 21 12:15:45 2012] Writing fullrun_mos1_xmm0109130301_pi300-10000_pass1_cl_src9.gif
[Sat Jul 21 12:17:00 2012] Mean detx,y = (-6877.96, -2321.75) 
[Sat Jul 21 12:17:02 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 21 12:17:28 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 21 12:17:28 2012] Setting source spectrum file to fullrun_mos1_xmm0109130301_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Sat Jul 21 12:17:28 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0109130301_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Sat Jul 21 12:27:39 2012] Not generating rmf since there are only 25 counts
[Sat Jul 21 12:27:39 2012] rmf not generated due to insufficient counts
[Sat Jul 21 12:40:35 2012] Updating aperture counts using extracted products
[Sat Jul 21 12:40:35 2012] Error reading totcts from fullrun_mos1_xmm0109130301_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Sat Jul 21 12:40:35 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 21 12:40:35 2012] Using photon index=1.80, rate=0.0047, arf fullrun_mos1_xmm0109130301_pi300-10000_pass1_cl_src9.arf
[Sat Jul 21 12:40:35 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 21 12:40:35 2012] Updating source flux to 7.9e-14
[Sat Jul 21 12:40:38 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting