[Wed Sep  5 06:45:44 2012] Detection parameters:
  Position = (278.7, 285.8) = 1 23 54.08 -35 3 57.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 25262.1 +/- 187.4
  Background counts = 29.1
  Rate = 3 +/- 0.02

[Wed Sep  5 06:45:44 2012] Off-axis axis estimate = 1.70'
[Wed Sep  5 06:46:49 2012] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Wed Sep  5 06:46:49 2012] Initial guess for spatial extent in simple fitting = 7.28"
[Wed Sep  5 06:46:49 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.847
[Wed Sep  5 06:46:49 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 7.28"
[Wed Sep  5 07:02:34 2012] fullrun_pn_xmm0109130201_pi300-10000_cl_pass0_src2.ximg exists
[Wed Sep  5 07:02:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109130201_pi300-10000_cl_pass0_src2.csv
[Wed Sep  5 07:02:34 2012] fullrun_pn_xmm0109130201_pi300-10000_cl_pass0_src2_1.ximg exists
[Wed Sep  5 07:02:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109130201_pi300-10000_cl_pass0_src2.csv
[Wed Sep  5 07:02:34 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109130201_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109130201_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep  5 07:02:34 2012] fullrun_pn_xmm0109130201_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Wed Sep  5 07:02:34 2012] fullrun_pn_xmm0109130201_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Wed Sep  5 07:02:34 2012] Fit fullrun_pn_xmm0109130201_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Wed Sep  5 07:17:30 2012] Spatial fit model total counts = 20770.200000, observed total counts = 20502.000000
[Wed Sep  5 07:17:30 2012] Offset between fit and detection position for source 2 = 0.189641 pixels
[Wed Sep  5 07:17:30 2012] 20771.890000 total counts/ 4313.990000 bgd. counts: snr = 250.573334
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.189641 pixels
  Position = (278.7, 285.6) = 1 23 54.07 -35 3 56.9
  Extent = 5.8 (5.7-5.9)", rotation angle = 0
  Source counts = 16457.9 +/- 144.1
  Background counts = 4314.0
  Rate = 2 +/- 0.02
[Wed Sep  5 07:17:30 2012] Vigneting correction estimate = 1.000000
[Wed Sep  5 07:17:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep  5 07:17:30 2012] Assessing source extent using major axis lower bound
[Wed Sep  5 07:17:30 2012] Source does appear to be extended
[Wed Sep  5 07:17:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep  5 07:17:35 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Sep  5 07:17:35 2012] Initial guess for spatial extent in simple fitting = 5.81"
[Wed Sep  5 07:17:35 2012] source mask rpix=1.3, npix_max = 13, mask sum = 12, frac = 0.891
[Wed Sep  5 07:17:35 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 5.81"
[Wed Sep  5 07:30:24 2012] fullrun_pn_xmm0109130201_pi300-10000_cl_pass1_src2.ximg exists
[Wed Sep  5 07:30:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109130201_pi300-10000_cl_pass1_src2.csv
[Wed Sep  5 07:30:24 2012] fullrun_pn_xmm0109130201_pi300-10000_cl_pass1_src2_1.ximg exists
[Wed Sep  5 07:30:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109130201_pi300-10000_cl_pass1_src2.csv
[Wed Sep  5 07:30:24 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109130201_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109130201_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep  5 07:30:24 2012] fullrun_pn_xmm0109130201_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Wed Sep  5 07:30:24 2012] fullrun_pn_xmm0109130201_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Wed Sep  5 07:30:24 2012] Fit fullrun_pn_xmm0109130201_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Wed Sep  5 07:33:21 2012] Spatial fit model total counts = 20769.000000, observed total counts = 20502.000000
[Wed Sep  5 07:33:21 2012] Offset between fit and detection position for source 2 = 0.000017 pixels
[Wed Sep  5 07:33:21 2012] 20770.820000 total counts/ 4322.120000 bgd. counts: snr = 250.197617
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.000017 pixels
  Position = (278.7, 285.6) = 1 23 54.07 -35 3 56.9
  Extent = 5.8 (5.7-5.9)", rotation angle = 0
  Source counts = 16448.7 +/- 144.1
  Background counts = 4322.1
  Rate = 2 +/- 0.02
[Wed Sep  5 07:33:21 2012] Vigneting correction estimate = 1.000000
[Wed Sep  5 07:33:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep  5 07:33:21 2012] Assessing source extent using major axis lower bound
[Wed Sep  5 07:33:21 2012] Source does appear to be extended
[Wed Sep  5 07:33:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep  5 07:33:25 2012] Counts = 16448.700000, rescaling region sizes by 3.000000
[Wed Sep  5 07:33:25 2012] XMMSAS src. selection expression = ellipse(24200.553400, 24796.737200, 1043.874030, 1043.874030, 0.000000, X, Y)
[Wed Sep  5 07:33:25 2012] Writing source region out to fullrun_pn_xmm0109130201_pi300-10000_pass1_cl_src2_src.reg
[Wed Sep  5 07:33:25 2012] Extracting stamp from image fullrun_pn_xmm0109130201_pi300-10000_cl_sm2.00.img.gz, (219, 226) - (339, 346)
[Wed Sep  5 07:33:25 2012] XMMSAS bgd. selection expression = annulus(24200.553400, 24796.737200, 5219.370150, 10438.740300, X, Y) && !ellipse(17972.496300, 21168.358840, 433.644012, 433.644012, 0.000000, X, Y) && !ellipse(22513.758400, 25750.011000, 327.187209, 327.187209, 0.000000, X, Y) && !ellipse(20915.157318, 27393.394287, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29054.712800, 27328.378200, 385.303211, 385.303211, 0.000000, X, Y) && !ellipse(16228.398712, 27096.187653, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28295.650238, 25112.078949, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29676.887600, 24461.315000, 481.270414, 481.270414, 0.000000, X, Y) && !ellipse(33257.372800, 22673.702000, 563.770416, 344.308810, 79.016926, X, Y) && !ellipse(20211.995220, 21688.074800, 462.936013, 462.936013, 0.000000, X, Y)
[Wed Sep  5 07:33:25 2012] Writing fullrun_pn_xmm0109130201_pi300-10000_pass1_cl_src2.gif
[Wed Sep  5 07:33:51 2012] Mean detx,y = (10.86, -268.26) 
[Wed Sep  5 07:33:54 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Sep  5 07:36:21 2012] grppha failed
[Wed Sep  5 07:36:21 2012] Setting source spectrum file to fullrun_pn_xmm0109130201_pi300-10000_pass1_cl_src2_src.pi.gz
[Wed Sep  5 07:36:21 2012] Setting bgd. spectrum file to fullrun_pn_xmm0109130201_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Wed Sep  5 07:40:58 2012] Updating aperture counts using extracted products
[Wed Sep  5 07:40:58 2012] Error reading totcts from fullrun_pn_xmm0109130201_pi300-10000_pass1_cl_src2_src.pi.gz
[Wed Sep  5 07:40:58 2012] No arf file for this source, not re-computing flux
[Wed Sep  5 07:41:01 2012] Source 2 has no response, skipping
[Wed Sep  5 07:41:02 2012] xmm0109130201/analysis//spectral/fullrun_pn_xmm0109130201_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete