[Wed Sep  5 06:45:44 2012] Detection parameters:
  Position = (263.7, 276.3) = 1 23 59.39 -35 4 38.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 36.5 +/- 9.7
  Background counts = 28.5
  Rate = 0.006 +/- 0.001

[Wed Sep  5 06:45:44 2012] Off-axis axis estimate = 2.99'
[Wed Sep  5 06:46:49 2012] Using EEF radius (= 7.92 ")to estimate initial spatial extent for simple fitting
[Wed Sep  5 06:46:49 2012] Initial guess for spatial extent in simple fitting = 7.92"
[Wed Sep  5 06:46:49 2012] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.742
[Wed Sep  5 06:46:49 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 7.92"
[Wed Sep  5 07:02:34 2012] fullrun_pn_xmm0109130201_pi300-10000_cl_pass0_src10.ximg exists
[Wed Sep  5 07:02:34 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0109130201_pi300-10000_cl_pass0_src10.csv
[Wed Sep  5 07:02:34 2012] fullrun_pn_xmm0109130201_pi300-10000_cl_pass0_src10_1.ximg exists
[Wed Sep  5 07:02:34 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0109130201_pi300-10000_cl_pass0_src10.csv
[Wed Sep  5 07:02:34 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109130201_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109130201_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep  5 07:02:34 2012] fullrun_pn_xmm0109130201_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Wed Sep  5 07:02:34 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0109130201_pi300-10000_cl_pass0_tfrozen_src10.csv
[Wed Sep  5 07:02:34 2012] fullrun_pn_xmm0109130201_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Wed Sep  5 07:02:34 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0109130201_pi300-10000_cl_pass0_tfrozen_src10.csv
[Wed Sep  5 07:02:34 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109130201_pi300-10000_cl_pass0_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109130201_pi300-10000_cl_pass0_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep  5 07:17:30 2012] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 11.027055 pixels away
[Wed Sep  5 07:17:30 2012] Vigneting correction estimate = 1.000000
[Wed Sep  5 07:17:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep  5 07:17:30 2012] Assessing source extent using major
[Wed Sep  5 07:17:30 2012] Source does appear to be extended
[Wed Sep  5 07:17:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep  5 07:17:30 2012] Deleting source due to low Poisson probability 0.9