[Wed Sep  5 06:46:06 2012] Detection parameters:
  Position = (273.5, 297.2) = 1 23 55.92 -35 3 8.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 28.9 +/- 8.9
  Background counts = 9.3
  Rate = 0.004 +/- 0.001

[Wed Sep  5 06:46:06 2012] Off-axis axis estimate = 1.81'
[Wed Sep  5 07:10:57 2012] Using EEF radius (= 7.33 ")to estimate initial spatial extent for simple fitting
[Wed Sep  5 07:10:57 2012] Initial guess for spatial extent in simple fitting = 7.33"
[Wed Sep  5 07:10:57 2012] source mask rpix=1.7, npix_max = 19, mask sum = 10, frac = 0.523
[Wed Sep  5 07:10:57 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 7.33"
[Wed Sep  5 07:17:27 2012] fullrun_mos2_xmm0109130201_pi300-10000_cl_pass0_src4.ximg exists
[Wed Sep  5 07:17:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109130201_pi300-10000_cl_pass0_src4.csv
[Wed Sep  5 07:17:27 2012] fullrun_mos2_xmm0109130201_pi300-10000_cl_pass0_src4_1.ximg exists
[Wed Sep  5 07:17:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109130201_pi300-10000_cl_pass0_src4.csv
[Wed Sep  5 07:17:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109130201_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109130201_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep  5 07:17:27 2012] fullrun_mos2_xmm0109130201_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Wed Sep  5 07:17:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109130201_pi300-10000_cl_pass0_tfrozen_src4.csv
[Wed Sep  5 07:17:27 2012] fullrun_mos2_xmm0109130201_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Wed Sep  5 07:17:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109130201_pi300-10000_cl_pass0_tfrozen_src4.csv
[Wed Sep  5 07:17:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109130201_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109130201_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep  5 07:17:32 2012] Source 3 is offset by -4.149203 and 5.944125 pixels which is larger than
2 X fitted extent = 4.009389 x 4.009389, not incorporating fit results
[Wed Sep  5 07:17:32 2012] Vigneting correction estimate = 1.000000
[Wed Sep  5 07:17:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep  5 07:17:32 2012] Assessing source extent using major
[Wed Sep  5 07:17:32 2012] Source does appear to be extended
[Wed Sep  5 07:17:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep  5 07:17:32 2012] Deleting source due to low Poisson probability 0.9