[Fri Jul 27 02:13:00 2012] Detection parameters:
  Position = (357.1, 393.0) = 0 5 9.62 63 47 34.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 42.9 +/- 9.1
  Background counts = 9.4
  Rate = 0.002 +/- 0.0004

[Fri Jul 27 02:13:00 2012] Off-axis axis estimate = 8.07'
[Fri Jul 27 03:33:19 2012] Using EEF radius (= 10.46 ")to estimate initial spatial extent for simple fitting
[Fri Jul 27 03:33:19 2012] Initial guess for spatial extent in simple fitting = 10.46"
[Fri Jul 27 03:33:19 2012] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.066
[Fri Jul 27 03:33:19 2012] Giving source the simple spatial ID 12 for pass 0, mean size = 10.46"
[Fri Jul 27 04:04:53 2012] fullrun_mos2_xmm0109120101_pi300-10000_cl_pass0_src12.ximg exists
[Fri Jul 27 04:04:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109120101_pi300-10000_cl_pass0_src12.csv
[Fri Jul 27 04:04:53 2012] fullrun_mos2_xmm0109120101_pi300-10000_cl_pass0_src12_1.ximg exists
[Fri Jul 27 04:04:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109120101_pi300-10000_cl_pass0_src12.csv
[Fri Jul 27 04:04:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109120101_pi300-10000_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109120101_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 04:04:53 2012] fullrun_mos2_xmm0109120101_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Fri Jul 27 04:04:53 2012] fullrun_mos2_xmm0109120101_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Fri Jul 27 04:04:53 2012] Fit fullrun_mos2_xmm0109120101_pi300-10000_cl_pass0_tfrozen_src12 appears to have run properly
[Fri Jul 27 04:05:19 2012] Warning: source 12 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 7 at 12.983711 pixels away
[Fri Jul 27 04:05:19 2012] Vigneting correction estimate = 1.000000
[Fri Jul 27 04:05:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 27 04:05:19 2012] Assessing source extent using major
[Fri Jul 27 04:05:19 2012] Source does appear to be extended
[Fri Jul 27 04:05:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 27 05:20:31 2012] Using EEF radius (= 10.46 ")to estimate initial spatial extent for simple fitting
[Fri Jul 27 05:20:31 2012] Initial guess for spatial extent in simple fitting = 10.46"
[Fri Jul 27 05:20:31 2012] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.066
[Fri Jul 27 05:20:31 2012] Giving source the simple spatial ID 12 for pass 1, mean size = 10.46"
[Fri Jul 27 05:56:23 2012] fullrun_mos2_xmm0109120101_pi300-10000_cl_pass1_src12.ximg exists
[Fri Jul 27 05:56:23 2012] fullrun_mos2_xmm0109120101_pi300-10000_cl_pass1_src12_1.ximg exists
[Fri Jul 27 05:56:23 2012] Fit fullrun_mos2_xmm0109120101_pi300-10000_cl_pass1_src12 appears to have run properly
[Fri Jul 27 05:56:23 2012] fullrun_mos2_xmm0109120101_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Fri Jul 27 05:56:23 2012] fullrun_mos2_xmm0109120101_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Fri Jul 27 05:56:23 2012] Fit fullrun_mos2_xmm0109120101_pi300-10000_cl_pass1_tfrozen_src12 appears to have run properly
[Fri Jul 27 05:56:37 2012] Source 7 is offset by 5.146503 and 8.551917 pixels which is larger than
2 X fitted extent = 1.325140 x 1.325140, not incorporating fit results
[Fri Jul 27 05:56:37 2012] Vigneting correction estimate = 1.000000
[Fri Jul 27 05:56:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 27 05:56:37 2012] Assessing source extent using major
[Fri Jul 27 05:56:37 2012] Source does appear to be extended
[Fri Jul 27 05:56:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 27 06:50:50 2012] XMMSAS src. selection expression = ellipse(31015.573761, 34145.364777, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jul 27 06:50:50 2012] Writing source region out to fullrun_mos2_xmm0109120101_pi300-10000_pass1_cl_src7_src.reg
[Fri Jul 27 06:50:50 2012] Extracting stamp from image fullrun_mos2_xmm0109120101_pi300-10000_cl_sm2.00.img.gz, (320, 356) - (395, 431)
[Fri Jul 27 06:50:50 2012] XMMSAS bgd. selection expression = annulus(31015.573761, 34145.364777, 1087.500000, 2175.000000, X, Y) && !ellipse(31745.971200, 34310.018200, 622.369618, 414.792012, 46.726430, X, Y)
[Fri Jul 27 06:50:50 2012] Writing fullrun_mos2_xmm0109120101_pi300-10000_pass1_cl_src7.gif
[Fri Jul 27 06:53:24 2012] Mean detx,y = (-3204.60, -10206.86) 
[Fri Jul 27 06:53:25 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul 27 06:53:34 2012] Binned source spectrum to 10 counts/bin
[Fri Jul 27 06:53:34 2012] Setting source spectrum file to fullrun_mos2_xmm0109120101_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Fri Jul 27 06:53:34 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0109120101_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Fri Jul 27 07:10:00 2012] Not generating rmf since there are only 42 counts
[Fri Jul 27 07:10:00 2012] rmf not generated due to insufficient counts
[Fri Jul 27 07:11:28 2012] Updating aperture counts using extracted products
[Fri Jul 27 07:11:28 2012] Error reading totcts from fullrun_mos2_xmm0109120101_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Fri Jul 27 07:11:29 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 27 07:11:29 2012] Using photon index=1.80, rate=0.00185, arf fullrun_mos2_xmm0109120101_pi300-10000_pass1_cl_src7.arf
[Fri Jul 27 07:11:29 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 27 07:11:29 2012] Updating source flux to 3.6e-14
[Fri Jul 27 07:11:53 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting