[Fri Jul 27 02:13:00 2012] Detection parameters:
  Position = (213.6, 277.3) = 0 6 43.57 63 39 11.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 87.6 +/- 12.1
  Background counts = 11.6
  Rate = 0.003 +/- 0.0004

[Fri Jul 27 02:13:00 2012] Off-axis axis estimate = 6.34'
[Fri Jul 27 03:33:19 2012] Using EEF radius (= 9.60 ")to estimate initial spatial extent for simple fitting
[Fri Jul 27 03:33:19 2012] Initial guess for spatial extent in simple fitting = 9.60"
[Fri Jul 27 03:33:19 2012] source mask rpix=2.2, npix_max = 29, mask sum = 25, frac = 0.853
[Fri Jul 27 03:33:19 2012] Giving source the simple spatial ID 8 for pass 0, mean size = 9.60"
[Fri Jul 27 04:04:53 2012] fullrun_mos2_xmm0109120101_pi300-10000_cl_pass0_src8.ximg exists
[Fri Jul 27 04:04:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109120101_pi300-10000_cl_pass0_src8.csv
[Fri Jul 27 04:04:53 2012] fullrun_mos2_xmm0109120101_pi300-10000_cl_pass0_src8_1.ximg exists
[Fri Jul 27 04:04:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109120101_pi300-10000_cl_pass0_src8.csv
[Fri Jul 27 04:04:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109120101_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109120101_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 04:04:53 2012] fullrun_mos2_xmm0109120101_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Fri Jul 27 04:04:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109120101_pi300-10000_cl_pass0_tfrozen_src8.csv
[Fri Jul 27 04:04:53 2012] fullrun_mos2_xmm0109120101_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Fri Jul 27 04:04:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109120101_pi300-10000_cl_pass0_tfrozen_src8.csv
[Fri Jul 27 04:04:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109120101_pi300-10000_cl_pass0_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109120101_pi300-10000_cl_pass0_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 04:05:19 2012] Warning: source 8 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 16 at 13.415922 pixels away
[Fri Jul 27 04:05:19 2012] Vigneting correction estimate = 1.000000
[Fri Jul 27 04:05:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 27 04:05:19 2012] Assessing source extent using major
[Fri Jul 27 04:05:19 2012] Source does appear to be extended
[Fri Jul 27 04:05:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 27 05:20:31 2012] Using EEF radius (= 9.60 ")to estimate initial spatial extent for simple fitting
[Fri Jul 27 05:20:31 2012] Initial guess for spatial extent in simple fitting = 9.60"
[Fri Jul 27 05:20:31 2012] source mask rpix=2.2, npix_max = 29, mask sum = 25, frac = 0.853
[Fri Jul 27 05:20:31 2012] Giving source the simple spatial ID 8 for pass 1, mean size = 9.60"
[Fri Jul 27 05:56:23 2012] fullrun_mos2_xmm0109120101_pi300-10000_cl_pass1_src8.ximg exists
[Fri Jul 27 05:56:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109120101_pi300-10000_cl_pass1_src8.csv
[Fri Jul 27 05:56:23 2012] fullrun_mos2_xmm0109120101_pi300-10000_cl_pass1_src8_1.ximg exists
[Fri Jul 27 05:56:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109120101_pi300-10000_cl_pass1_src8.csv
[Fri Jul 27 05:56:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109120101_pi300-10000_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109120101_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 05:56:23 2012] fullrun_mos2_xmm0109120101_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Fri Jul 27 05:56:23 2012] fullrun_mos2_xmm0109120101_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Fri Jul 27 05:56:23 2012] Fit fullrun_mos2_xmm0109120101_pi300-10000_cl_pass1_tfrozen_src8 appears to have run properly
[Fri Jul 27 05:56:36 2012] Spatial fit model total counts = 158.487000, observed total counts = 151.000000
[Fri Jul 27 05:56:36 2012] Offset between fit and detection position for source 16 = 0.129703 pixels
[Fri Jul 27 05:56:36 2012] 160.628300 total counts/ 96.741700 bgd. counts: snr = 6.495355
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 0.129703 pixels
  Position = (213.6, 277.4) = 0 6 43.58 63 39 11.2
  Extent = 5.1 (4.0-6.1)", rotation angle = 0
  Source counts = 63.9 +/- 12.7
  Background counts = 96.7
  Rate = 0.002 +/- 0.0003
[Fri Jul 27 05:56:37 2012] Vigneting correction estimate = 1.000000
[Fri Jul 27 05:56:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 27 05:56:37 2012] Assessing source extent using major axis lower bound
[Fri Jul 27 05:56:37 2012] Source does appear to be extended
[Fri Jul 27 05:56:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 27 06:50:50 2012] XMMSAS src. selection expression = ellipse(18531.528400, 24084.545000, 305.197982, 305.197982, 0.000000, X, Y)
[Fri Jul 27 06:50:50 2012] Writing source region out to fullrun_mos2_xmm0109120101_pi300-10000_pass1_cl_src16_src.reg
[Fri Jul 27 06:50:50 2012] Extracting stamp from image fullrun_mos2_xmm0109120101_pi300-10000_cl_sm2.00.img.gz, (196, 260) - (231, 295)
[Fri Jul 27 06:50:50 2012] XMMSAS bgd. selection expression = annulus(18531.528400, 24084.545000, 508.663304, 1017.326608, X, Y)
[Fri Jul 27 06:50:50 2012] Writing fullrun_mos2_xmm0109120101_pi300-10000_pass1_cl_src16.gif
[Fri Jul 27 06:52:32 2012] Mean detx,y = (-1048.05, 5640.49) 
[Fri Jul 27 06:52:33 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul 27 06:52:45 2012] Binned source spectrum to 10 counts/bin
[Fri Jul 27 06:52:46 2012] Setting source spectrum file to fullrun_mos2_xmm0109120101_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Fri Jul 27 06:52:46 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0109120101_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Fri Jul 27 07:09:41 2012] Not generating rmf since there are only 63 counts
[Fri Jul 27 07:09:41 2012] rmf not generated due to insufficient counts
[Fri Jul 27 07:11:28 2012] Updating aperture counts using extracted products
[Fri Jul 27 07:11:28 2012] Error reading totcts from fullrun_mos2_xmm0109120101_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Fri Jul 27 07:11:29 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 27 07:11:29 2012] Using photon index=1.80, rate=0.00176, arf fullrun_mos2_xmm0109120101_pi300-10000_pass1_cl_src16.arf
[Fri Jul 27 07:11:29 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 27 07:11:29 2012] Updating source flux to 4e-14
[Fri Jul 27 07:11:53 2012] Source 16 has fewer than 100.000000 counts, skipping spectral fitting