[Fri Jul 27 02:13:00 2012] Detection parameters:
  Position = (275.3, 299.1) = 0 6 3.24 63 40 47.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3820.1 +/- 73.6
  Background counts = 13.2
  Rate = 0.1 +/- 0.002

[Fri Jul 27 02:13:00 2012] Off-axis axis estimate = 1.68'
[Fri Jul 27 03:33:19 2012] Using EEF radius (= 7.27 ")to estimate initial spatial extent for simple fitting
[Fri Jul 27 03:33:19 2012] Initial guess for spatial extent in simple fitting = 7.27"
[Fri Jul 27 03:33:19 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.849
[Fri Jul 27 03:33:19 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.27"
[Fri Jul 27 04:04:53 2012] fullrun_mos2_xmm0109120101_pi300-10000_cl_pass0_src1.ximg exists
[Fri Jul 27 04:04:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109120101_pi300-10000_cl_pass0_src1.csv
[Fri Jul 27 04:04:53 2012] fullrun_mos2_xmm0109120101_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Jul 27 04:04:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109120101_pi300-10000_cl_pass0_src1.csv
[Fri Jul 27 04:04:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109120101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109120101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 04:04:53 2012] fullrun_mos2_xmm0109120101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Jul 27 04:04:53 2012] fullrun_mos2_xmm0109120101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Jul 27 04:04:53 2012] Fit fullrun_mos2_xmm0109120101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Jul 27 04:05:19 2012] Spatial fit model total counts = 3566.740000, observed total counts = 3505.000000
[Fri Jul 27 04:05:19 2012] Offset between fit and detection position for source 1 = 0.074771 pixels
[Fri Jul 27 04:05:19 2012] 3586.741000 total counts/ 951.781000 bgd. counts: snr = 85.409369
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.074771 pixels
  Position = (275.3, 299.1) = 0 6 3.27 63 40 46.4
  Extent = 5.3 (5.2-5.5)", rotation angle = 0
  Source counts = 2635.0 +/- 59.9
  Background counts = 951.8
  Rate = 0.07 +/- 0.002
[Fri Jul 27 04:05:19 2012] Vigneting correction estimate = 1.000000
[Fri Jul 27 04:05:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 27 04:05:19 2012] Assessing source extent using major axis lower bound
[Fri Jul 27 04:05:19 2012] Source does appear to be extended
[Fri Jul 27 04:05:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 27 05:20:31 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jul 27 05:20:31 2012] Initial guess for spatial extent in simple fitting = 5.34"
[Fri Jul 27 05:20:31 2012] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.006
[Fri Jul 27 05:20:31 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.34"
[Fri Jul 27 05:56:22 2012] fullrun_mos2_xmm0109120101_pi300-10000_cl_pass1_src1.ximg exists
[Fri Jul 27 05:56:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109120101_pi300-10000_cl_pass1_src1.csv
[Fri Jul 27 05:56:22 2012] fullrun_mos2_xmm0109120101_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Jul 27 05:56:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109120101_pi300-10000_cl_pass1_src1.csv
[Fri Jul 27 05:56:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109120101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109120101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 05:56:23 2012] fullrun_mos2_xmm0109120101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Jul 27 05:56:23 2012] fullrun_mos2_xmm0109120101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Jul 27 05:56:23 2012] Fit fullrun_mos2_xmm0109120101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Jul 27 05:56:36 2012] Spatial fit model total counts = 3571.420000, observed total counts = 3505.000000
[Fri Jul 27 05:56:36 2012] Offset between fit and detection position for source 1 = 0.005633 pixels
[Fri Jul 27 05:56:36 2012] 3591.607000 total counts/ 955.497000 bgd. counts: snr = 85.280329
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.005633 pixels
  Position = (275.3, 299.1) = 0 6 3.27 63 40 46.4
  Extent = 5.3 (5.2-5.5)", rotation angle = 0
  Source counts = 2636.1 +/- 59.9
  Background counts = 955.5
  Rate = 0.07 +/- 0.002
[Fri Jul 27 05:56:37 2012] Vigneting correction estimate = 1.000000
[Fri Jul 27 05:56:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 27 05:56:37 2012] Assessing source extent using major axis lower bound
[Fri Jul 27 05:56:37 2012] Source does appear to be extended
[Fri Jul 27 05:56:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 27 06:50:50 2012] Counts = 2636.110000, rescaling region sizes by 2.000000
[Fri Jul 27 06:50:50 2012] XMMSAS src. selection expression = ellipse(23900.570200, 25977.155200, 639.061218, 639.061218, 0.000000, X, Y)
[Fri Jul 27 06:50:50 2012] Writing source region out to fullrun_mos2_xmm0109120101_pi300-10000_pass1_cl_src1_src.reg
[Fri Jul 27 06:50:50 2012] Extracting stamp from image fullrun_mos2_xmm0109120101_pi300-10000_cl_sm2.00.img.gz, (239, 262) - (312, 336)
[Fri Jul 27 06:50:50 2012] XMMSAS bgd. selection expression = annulus(23900.570200, 25977.155200, 2130.204061, 4260.408123, X, Y) && !ellipse(27394.699400, 25606.397520, 348.881610, 348.881610, 0.000000, X, Y) && !ellipse(24623.185800, 21655.254200, 316.828009, 316.828009, 0.000000, X, Y) && !ellipse(21172.061600, 24375.542800, 658.232819, 658.232819, 0.000000, X, Y) && !ellipse(25982.969120, 24988.037400, 533.562415, 452.081613, 357.930592, X, Y)
[Fri Jul 27 06:50:50 2012] Writing fullrun_mos2_xmm0109120101_pi300-10000_pass1_cl_src1.gif
[Fri Jul 27 06:50:53 2012] Mean detx,y = (102.96, 63.62) 
[Fri Jul 27 06:50:54 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul 27 06:51:06 2012] Binned source spectrum to 10 counts/bin
[Fri Jul 27 06:51:06 2012] Setting source spectrum file to fullrun_mos2_xmm0109120101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Jul 27 06:51:06 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0109120101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Jul 27 07:11:28 2012] Updating aperture counts using extracted products
[Fri Jul 27 07:11:28 2012] Error reading totcts from fullrun_mos2_xmm0109120101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Jul 27 07:11:28 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 27 07:11:28 2012] Using photon index=1.80, rate=0.0725, arf fullrun_mos2_xmm0109120101_pi300-10000_pass1_cl_src1.arf
[Fri Jul 27 07:11:28 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 27 07:11:28 2012] Updating source flux to 9.5e-13
[Fri Jul 27 07:12:23 2012] Reading fit data from xmm0109120101/analysis//spectral/fullrun_mos2_xmm0109120101_pi300-10000_pass1_cl_src1_pl.csv
[Fri Jul 27 07:12:23 2012] Spectral fit parameter nH value = 4.16807e+21
[Fri Jul 27 07:12:23 2012] Spectral fit parameter PhoIndex value = 3.55565
[Fri Jul 27 07:12:23 2012] Failed to get F(0.3-8.0) from xmm0109120101/analysis//spectral/fullrun_mos2_xmm0109120101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Jul 27 07:12:23 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 27 07:12:23 2012] Using Nh = 4.2e+21, photon index=3.56, rate=0.0725, arf fullrun_mos2_xmm0109120101_pi300-10000_pass1_cl_src1.arf
[Fri Jul 27 07:12:23 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 27 07:12:23 2012] Updating source flux to 6.7e-13