[Thu May 31 20:24:28 2012] Detection parameters:
  Position = (459.8, 326.0) = 12 3 44.39 -61 59 27.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 164.6 +/- 19.1
  Background counts = 56.3
  Rate = 0.002 +/- 0.0003

[Thu May 31 20:24:29 2012] Off-axis axis estimate = 11.87'
[Thu May 31 20:27:43 2012] Using EEF radius (= 12.36 ")to estimate initial spatial extent for simple fitting
[Thu May 31 20:27:43 2012] Initial guess for spatial extent in simple fitting = 12.36"
[Thu May 31 20:27:43 2012] source mask rpix=2.8, npix_max = 44, mask sum = 42, frac = 0.940
[Thu May 31 20:27:43 2012] Giving source the simple spatial ID 18 for pass 0, mean size = 12.36"
[Thu May 31 21:42:41 2012] fullrun_pn_xmm0109110101_pi300-10000_cl_pass0_src18.ximg exists
[Thu May 31 21:42:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109110101_pi300-10000_cl_pass0_src18.csv
[Thu May 31 21:42:41 2012] fullrun_pn_xmm0109110101_pi300-10000_cl_pass0_src18_1.ximg exists
[Thu May 31 21:42:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109110101_pi300-10000_cl_pass0_src18.csv
[Thu May 31 21:42:41 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109110101_pi300-10000_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109110101_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 31 21:42:42 2012] fullrun_pn_xmm0109110101_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Thu May 31 21:42:42 2012] fullrun_pn_xmm0109110101_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Thu May 31 21:42:42 2012] Fit fullrun_pn_xmm0109110101_pi300-10000_cl_pass0_tfrozen_src18 appears to have run properly
[Thu May 31 23:18:36 2012] Warning: source 18 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 18 at 16.184883 pixels away
[Thu May 31 23:18:37 2012] Vigneting correction estimate = 1.000000
[Thu May 31 23:18:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 31 23:18:37 2012] Assessing source extent using major
[Thu May 31 23:18:37 2012] Source does appear to be extended
[Thu May 31 23:18:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 31 23:19:02 2012] Using EEF radius (= 12.36 ")to estimate initial spatial extent for simple fitting
[Thu May 31 23:19:02 2012] Initial guess for spatial extent in simple fitting = 12.36"
[Thu May 31 23:19:02 2012] source mask rpix=2.8, npix_max = 44, mask sum = 42, frac = 0.940
[Thu May 31 23:19:02 2012] Giving source the simple spatial ID 17 for pass 1, mean size = 12.36"
[Fri Jun  1 00:34:59 2012] fullrun_pn_xmm0109110101_pi300-10000_cl_pass1_src17.ximg exists
[Fri Jun  1 00:34:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109110101_pi300-10000_cl_pass1_src17.csv
[Fri Jun  1 00:34:59 2012] fullrun_pn_xmm0109110101_pi300-10000_cl_pass1_src17_1.ximg exists
[Fri Jun  1 00:34:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109110101_pi300-10000_cl_pass1_src17.csv
[Fri Jun  1 00:34:59 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109110101_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109110101_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  1 00:35:00 2012] fullrun_pn_xmm0109110101_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Fri Jun  1 00:35:00 2012] fullrun_pn_xmm0109110101_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Fri Jun  1 00:35:00 2012] Fit fullrun_pn_xmm0109110101_pi300-10000_cl_pass1_tfrozen_src17 appears to have run properly
[Fri Jun  1 01:51:05 2012] Warning: source 17 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 18 at 14.060991 pixels away
[Fri Jun  1 01:51:05 2012] Vigneting correction estimate = 1.000000
[Fri Jun  1 01:51:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  1 01:51:05 2012] Assessing source extent using major
[Fri Jun  1 01:51:05 2012] Source does appear to be extended
[Fri Jun  1 01:51:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  1 01:51:29 2012] XMMSAS src. selection expression = ellipse(39955.176880, 28317.750702, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun  1 01:51:29 2012] Writing source region out to fullrun_pn_xmm0109110101_pi300-10000_pass1_cl_src18_src.reg
[Fri Jun  1 01:51:29 2012] Extracting stamp from image fullrun_pn_xmm0109110101_pi300-10000_cl_sm2.00.img.gz, (422, 289) - (497, 364)
[Fri Jun  1 01:51:29 2012] XMMSAS bgd. selection expression = annulus(39955.176880, 28317.750702, 1087.500000, 2175.000000, X, Y) && !ellipse(37170.460022, 28831.467010, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39105.984344, 27198.512482, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun  1 01:51:29 2012] Writing fullrun_pn_xmm0109110101_pi300-10000_pass1_cl_src18.gif
[Fri Jun  1 02:02:54 2012] Mean detx,y = (-11574.41, -8130.67) 
[Fri Jun  1 02:02:57 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun  1 02:03:20 2012] Binned source spectrum to 10 counts/bin
[Fri Jun  1 02:03:20 2012] Setting source spectrum file to fullrun_pn_xmm0109110101_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Fri Jun  1 02:03:20 2012] Setting bgd. spectrum file to fullrun_pn_xmm0109110101_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Fri Jun  1 02:48:36 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jun  1 02:48:36 2012] rmf not generated due to insufficient counts
[Fri Jun  1 04:28:46 2012] Updating aperture counts using extracted products
[Fri Jun  1 04:28:46 2012] Error reading totcts from fullrun_pn_xmm0109110101_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Fri Jun  1 04:28:47 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun  1 04:28:47 2012] Using photon index=1.80, rate=0.00229, arf fullrun_pn_xmm0109110101_pi300-10000_pass1_cl_src18.arf
[Fri Jun  1 04:28:47 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun  1 04:28:47 2012] Updating source flux to 1.6e-14
[Fri Jun  1 04:29:59 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting